Breno Leitao wrote:
Hello,
I found that qlge is broken on PPC, and it got broken after commit
06a1cbafb253c4c60d6a54a994887f5fbceabcc0. It happens because dev->pcie
is not set on PPC, because the function set_pcie_port_type(), who sets
dev->pcie, is not being called on PPC PCI code.
Hi Breno,
I'm sorry for the regression. I didn't realize that PPC uses open-coded
PCI scan.
I guess the problem is caused by dev->pcie_cap, right? But I don't
understand what is happening clearly. Could you send me the detailed
information about the problem?
So, I have two ideas to fix it, the first one is to call
set_pcie_port_type() on pci_device_add() instead of pci_setup_device().
Since that PPC device flow calls pci_device_add(), it fixes the problem
without duplicating the caller for this function.
The set_pcie_port_type() needs to be called before pci_fixup_device() in
pci_setup_device() because fixup code might refer dev->pcie_cap. So I
don't think the first one is a good idea.
OTOH, it's also possible to add set_pcie_port_type() on pci.h and call
it inside the PPC PCI files, specifically on of_create_pci_dev().
I tested both ideas and they work perfect, so I'd like to figure out
which one is the most correct one. Both patches are attached here.
I think the second one is better. But to prevent similar problems, I
think it would be better to remove open-coded PCI scan in PPC in a
long term, though I don't know the background about that.
Thanks,
Kenji Kaneshige
Thanks,
Breno
----- First idea -----
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 98ffb2d..328c3ab 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -746,7 +746,6 @@ int pci_setup_device(struct pci_dev *dev)
dev->hdr_type = hdr_type & 0x7f;
dev->multifunction = !!(hdr_type & 0x80);
dev->error_state = pci_channel_io_normal;
- set_pcie_port_type(dev);
set_pci_aer_firmware_first(dev);
list_for_each_entry(slot, &dev->bus->slots, list)
@@ -1052,6 +1051,7 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus
*bus)
/* Initialize various capabilities */
pci_init_capabilities(dev);
+ set_pcie_port_type(dev);
/*
* Add the device to our list of discovered devices
* and the bus list for fixup functions, etc.
----- Second idea -----
diff --git a/arch/powerpc/kernel/pci_of_scan.c
b/arch/powerpc/kernel/pci_of_scan.c
index 7311fdf..f8820e8 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -160,6 +160,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
dev->error_state = pci_channel_io_normal;
dev->dma_mask = 0xffffffff;
+ set_pcie_port_type(dev);
if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
/* a PCI-PCI bridge */
dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 98ffb2d..f787eea 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -681,7 +681,7 @@ static void pci_read_irq(struct pci_dev *dev)
dev->irq = irq;
}
-static void set_pcie_port_type(struct pci_dev *pdev)
+void set_pcie_port_type(struct pci_dev *pdev)
{
int pos;
u16 reg16;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 174e539..765095b 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1269,6 +1269,7 @@ int pcibios_add_platform_entries(struct pci_dev *dev);
void pcibios_disable_device(struct pci_dev *dev);
int pcibios_set_pcie_reset_state(struct pci_dev *dev,
enum pcie_reset_state state);
+extern void set_pcie_port_type(struct pci_dev *pdev);
#ifdef CONFIG_PCI_MMCONFIG
extern void __init pci_mmcfg_early_init(void);
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
