From: Piotr Ziecik <ko...@semihalf.com>
- Update Kconfig for i2c-mpc driver.
- Enable I2C interrupts on MPC5121.
Signed-off-by: Piotr Ziecik <ko...@semihalf.com>
Signed-off-by: Wolfgang Denk <w...@denx.de>
Signed-off-by: Anatolij Gustschin <ag...@denx.de>
Cc: <linux-...@vger.kernel.org>
Cc: Grant Likely <grant.lik...@secretlab.ca>
Cc: John Rigby <jcri...@gmail.com>
---
drivers/i2c/busses/Kconfig | 9 +++++----
drivers/i2c/busses/i2c-mpc.c | 23 +++++++++++++++++++++++
2 files changed, 28 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 5f318ce..f481f30 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -418,13 +418,14 @@ config I2C_IXP2000
instead.
config I2C_MPC
- tristate "MPC107/824x/85xx/52xx/86xx"
+ tristate "MPC107/824x/85xx/512x/52xx/86xx"
depends on PPC32
help
If you say yes to this option, support will be included for the
- built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and
- MPC85xx/MPC8641 family processors. The driver may also work on 52xx
- family processors, though interrupts are known not to work.
+ built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245,
+ MPC85xx/MPC8641 and MPC512x family processors. The driver may
+ also work on 52xx family processors, though interrupts are known
+ not to work.
This driver can also be built as a module. If so, the module
will be called i2c-mpc.
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index f627001..84eeb25 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -540,6 +540,29 @@ static int __devinit fsl_i2c_probe(struct of_device *op,
}
}
+ if (of_device_is_compatible(op->node, "fsl,mpc5121-i2c")) {
+ struct device_node *np;
+ void __iomem *i2cctl;
+
+ /* Enable I2C interrupts */
+ np = of_find_compatible_node(NULL, NULL,
+ "fsl,mpc5121-i2c-ctrl");
+ if (np) {
+ i2cctl = of_iomap(np, 0);
+ if (i2cctl) {
+ /*
+ * Set interrupt enable bits:
+ * - I2C-0: bit 24,
+ * - I2C-1: bit 26,
+ * - I2C-2: bit 28.
+ */
+ out_be32(i2cctl, 0x15000000);
+ iounmap(i2cctl);
+ }
+ of_node_put(np);
+ }
+ }
+
dev_set_drvdata(&op->dev, i2c);
i2c->adap = mpc_ops;
--
1.5.6.3
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
