PING works now, after modifying the code of gianfar-mii.c 2009/12/8 林志平 <solyn...@gmail.com>
> > 2009/12/8 Scott Wood <scottw...@freescale.com> > > On Mon, Dec 07, 2009 at 11:53:22AM +0800, 林志平 wrote: >> > Does dtc1.2.0 can compile dts files under linux2.6.23? >> >> Probably not -- 2.6.23 is very old, and I think newer dtcs only support >> the >> newer dts syntax. >> >> > Another question is that I found linux2.6.31 does not support >> > board mpc8544ds, >> >> It should. What problems do you see? > > => bootm 0x1000000 0x1800000 0x800000 > ## Booting kernel from Legacy Image at 01000000 ... > Image Name: Linux-2.6.31 > Image Type: PowerPC Linux Kernel Image (gzip compressed) > Data Size: 2185099 Bytes = 2.1 MB > Load Address: 00000000 > Entry Point: 00000000 > Verifying Checksum ... OK > ## Loading init Ramdisk from Legacy Image at 01800000 ... > Image Name: Simple Embedded Linux Framework > Image Type: PowerPC Linux RAMDisk Image (gzip compressed) > Data Size: 1859256 Bytes = 1.8 MB > Load Address: 00000000 > Entry Point: 00000000 > Verifying Checksum ... OK > ## Flattened Device Tree blob at 00800000 > Booting using the fdt blob at 0x800000 > Uncompressing Kernel Image ... OK > Loading Ramdisk to 1fca7000, end 1fe6ceb8 ... OK > booting kernel using flat tree > It then stops and never print any more, I use mpc85xx_defconfig, I select > mpc85xxds in the menuconfig and deselect other options like mpc8540ads etc. > >> >> > And I never boot linux-2.6.31 on my board, why linux-2.6.31 doesnot >> > provide a config file like mpc8544_ds_defconfig? >> >> Does mpc85xx_defconfig not work? >> > Yes mcp85xx_defconfig does not work, I can see mpc8540ads in the > menuconfig, but no mpc8544ds. And when I down load the generated uImage, It > does not work. > > >> -Scott >> > >
_______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
