2009/12/8 Scott Wood <scottw...@freescale.com> > On Mon, Dec 07, 2009 at 11:53:22AM +0800, 林志平 wrote: > > Does dtc1.2.0 can compile dts files under linux2.6.23? > > Probably not -- 2.6.23 is very old, and I think newer dtcs only support the > newer dts syntax. > > > Another question is that I found linux2.6.31 does not support > > board mpc8544ds, > > It should. What problems do you see?
=> bootm 0x1000000 0x1800000 0x800000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux-2.6.31 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 2185099 Bytes = 2.1 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 01800000 ... Image Name: Simple Embedded Linux Framework Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 1859256 Bytes = 1.8 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 00800000 Booting using the fdt blob at 0x800000 Uncompressing Kernel Image ... OK Loading Ramdisk to 1fca7000, end 1fe6ceb8 ... OK booting kernel using flat tree It then stops and never print any more, I use mpc85xx_defconfig, I select mpc85xxds in the menuconfig and deselect other options like mpc8540ads etc. > > > And I never boot linux-2.6.31 on my board, why linux-2.6.31 doesnot > > provide a config file like mpc8544_ds_defconfig? > > Does mpc85xx_defconfig not work? > Yes mcp85xx_defconfig does not work, I can see mpc8540ads in the menuconfig, but no mpc8544ds. And when I down load the generated uImage, It does not work. > -Scott >
_______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
