Romen,
A driver for micrel phy exists in /drivers/net/phy/micrel.c. in 2.6.30.
You just need to add the structure with your phy information .

If you are using older kernel you may want to copy it.



Regards

Suvidh







------------------------------

Message: 6
Date: Tue, 27 Oct 2009 13:17:27 +0100
From: Roman Fietze <roman.fie...@telemotive.de>
To: linuxppc-dev@lists.ozlabs.org
Subject: Micrel PHY KSZ8001 on MPC5200B FEC
Message-ID: <200910271317.28007.roman.fie...@telemotive.de>
Content-Type: text/plain;  charset="iso-8859-1"

Hello,

We would need some help on how to make a Micrel KSZ8001 work on the
MPC5200B FEC using the kernel DENX-v2.6.3[01].

We can already boot the kernel and device tree using TFTP and this PHY
using a recent U-Boot version, so we would need some pointers how to
acomplish that.

Add a proper PHY driver in the Theirdirectory?

Modify the DTS? If yes, how? A link to some documentation that's not
already in the kernel sources would already help.

Is it correct, when looking at the sources, that the MPC's FEC driver
switched to the generic PHY driver interface?


Roman

--
Roman Fietze                Telemotive AG B?ro M?hlhausen
Breitwiesen                              73347 M?hlhausen
Tel.: +49(0)7335/18493-45        http://www.telemotive.de


------------------------------


_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev

Reply via email to