- hcu4.dts: Added definitions for 2 CAN (Intel 82527)
- hcu4.c: Some code for CPLD (special HW clock) and 2 CAN (Intel 82527)
Signed-off-by: Niklaus Giger <niklaus.gi...@member.fsf.org>
---
arch/powerpc/boot/dts/hcu4.dts | 193 ++++++++++++++++++++++---------------
arch/powerpc/platforms/40x/hcu4.c | 87 +++++++++++++++++
2 files changed, 200 insertions(+), 80 deletions(-)
diff --git a/arch/powerpc/boot/dts/hcu4.dts b/arch/powerpc/boot/dts/hcu4.dts
index 7988598..64ad122 100644
--- a/arch/powerpc/boot/dts/hcu4.dts
+++ b/arch/powerpc/boot/dts/hcu4.dts
@@ -1,164 +1,197 @@
/*
-* Device Tree Source for Netstal Maschinen HCU4
-* based on the IBM Walnut
-*
-* Copyright 2008
-* Niklaus Giger <niklaus.gi...@member.fsf.org>
-*
-* Copyright 2007 IBM Corp.
-* Josh Boyer <jwbo...@linux.vnet.ibm.com>
-*
-* This file is licensed under the terms of the GNU General Public
-* License version 2. This program is licensed "as is" without
-* any warranty of any kind, whether express or implied.
-*/
+ * Device Tree Source for Netstal Maschinen HCU4
+ * based on the IBM Walnut
+ *
+ * Copyright 2008-2009
+ * Niklaus Giger <niklaus.gi...@member.fsf.org>
+ *
+ * Copyright 2007 IBM Corp.
+ * Josh Boyer <jwbo...@linux.vnet.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
/dts-v1/;
/ {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "netstal,hcu4";
compatible = "netstal,hcu4";
- dcr-parent = <0x1>;
+ dcr-parent = <&{/cpus/c...@0}>;
aliases {
- ethernet0 = "/plb/opb/ether...@ef600800";
- serial0 = "/plb/opb/ser...@ef600300";
+ ethernet0 = &EMAC;
+ serial0 = &UART0;
};
cpus {
- #address-cells = <0x1>;
- #size-cells = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
c...@0 {
device_type = "cpu";
model = "PowerPC,405GPr";
- reg = <0x0>;
- clock-frequency = <0>; /* Filled in by U-Boot
*/
- timebase-frequency = <0x0>; /* Filled in by U-Boot
*/
- i-cache-line-size = <0x20>;
- d-cache-line-size = <0x20>;
- i-cache-size = <0x4000>;
- d-cache-size = <0x4000>;
+ reg = <0x00000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ timebase-frequency = <0>; /* Filled in by U-Boot */
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <16384>;
+ d-cache-size = <16384>;
dcr-controller;
dcr-access-method = "native";
- linux,phandle = <0x1>;
};
};
memory {
device_type = "memory";
- reg = <0x0 0x0>; /* Filled in by U-Boot */
+ reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
};
UIC0: interrupt-controller {
compatible = "ibm,uic";
interrupt-controller;
- cell-index = <0x0>;
- dcr-reg = <0xc0 0x9>;
- #address-cells = <0x0>;
- #size-cells = <0x0>;
- #interrupt-cells = <0x2>;
- linux,phandle = <0x2>;
+ cell-index = <0>;
+ dcr-reg = <0x0c0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
};
plb {
compatible = "ibm,plb3";
- #address-cells = <0x1>;
- #size-cells = <0x1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
ranges;
- clock-frequency = <0x0>; /* Filled in by U-Boot */
+ clock-frequency = <0>; /* Filled in by U-Boot */
SDRAM0: memory-controller {
compatible = "ibm,sdram-405gp";
- dcr-reg = <0x10 0x2>;
+ dcr-reg = <0x010 0x002>;
};
MAL: mcmal {
compatible = "ibm,mcmal-405gp", "ibm,mcmal";
- dcr-reg = <0x180 0x62>;
- num-tx-chans = <0x1>;
- num-rx-chans = <0x1>;
- interrupt-parent = <0x2>;
- interrupts = <0xb 0x4 0xc 0x4 0xa 0x4 0xd 0x4 0xe 0x4>;
- linux,phandle = <0x3>;
+ dcr-reg = <0x180 0x062>;
+ num-tx-chans = <1>;
+ num-rx-chans = <1>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <
+ 0xb 0x4 /* TXEOB */
+ 0xc 0x4 /* RXEOB */
+ 0xa 0x4 /* SERR */
+ 0xd 0x4 /* TXDE */
+ 0xe 0x4 /* RXDE */>;
};
POB0: opb {
compatible = "ibm,opb-405gp", "ibm,opb";
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- ranges = <0xef600000 0xef600000 0xa00000>;
- dcr-reg = <0xa0 0x5>;
- clock-frequency = <0x0>; /* Filled in by U-Boot
*/
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xef600000 0xef600000 0x00a00000>;
+ dcr-reg = <0x0a0 0x005>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
UART0: ser...@ef600300 {
device_type = "serial";
compatible = "ns16550";
- reg = <0xef600300 0x8>;
+ reg = <0xef600300 0x00000008>;
virtual-reg = <0xef600300>;
- clock-frequency = <0x0>;/* Filled in by U-Boot
*/
- current-speed = <0>; /* Filled in by U-Boot
*/
- interrupt-parent = <0x2>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC0>;
interrupts = <0x0 0x4>;
};
IIC: i...@ef600500 {
compatible = "ibm,iic-405gp", "ibm,iic";
- reg = <0xef600500 0x11>;
- interrupt-parent = <0x2>;
+ reg = <0xef600500 0x00000011>;
+ interrupt-parent = <&UIC0>;
interrupts = <0x2 0x4>;
};
GPIO: g...@ef600700 {
compatible = "ibm,gpio-405gp";
- reg = <0xef600700 0x20>;
+ reg = <0xef600700 0x00000020>;
};
EMAC: ether...@ef600800 {
device_type = "network";
compatible = "ibm,emac-405gp", "ibm,emac";
- interrupt-parent = <0x2>;
- interrupts = <0xf 0x4 0x9 0x4>;
- local-mac-address = [00 00 00 00 00 00];
- reg = <0xef600800 0x70>;
- mal-device = <0x3>;
- mal-tx-channel = <0x0>;
- mal-rx-channel = <0x0>;
- cell-index = <0x0>;
- max-frame-size = <0x5dc>;
- rx-fifo-size = <0x1000>;
- tx-fifo-size = <0x800>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <
+ 0xf 0x4 /* Ethernet */
+ 0x9 0x4 /* Ethernet Wake Up */>;
+ local-mac-address = [000000000000]; /* Filled
in by U-Boot */
+ reg = <0xef600800 0x00000070>;
+ mal-device = <&MAL>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <1500>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rmii";
- phy-map = <0x1>;
+ phy-map = <0x00000001>;
};
+
+ CPLD: c...@0x7d000000 {
+ reg = <0x7c000000 0x00000004>;
+ interval = "1000";
+ device_type = "cpld";
+ interrupts = <25 8>; /* 8 is IRQ_TYPE_LEVEL_LOW
*/
+ interrupt-parent = <&UIC0>;
+ };
+
+ CAN1: c...@0x0x78000000 {
+ reg = <0x78000000 0x00000100>;
+ device_type = "can1";
+ interrupts = <19 8>; /* 8 is IRQ_TYPE_LEVEL_LOW
*/
+ compatible = "intel,82527";
+ interrupt-parent = <&UIC0>;
+ };
+
+ CAN2: c...@0x0x78000004 {
+ reg = <0x78000100 0x00000100>;
+ device_type = "can2";
+ compatible = "intel,82527";
+ interrupts = <20 8>; /* 8 is IRQ_TYPE_LEVEL_LOW
*/
+ interrupt-parent = <&UIC0>;
+ };
+
};
EBC0: ebc {
compatible = "ibm,ebc-405gp", "ibm,ebc";
- dcr-reg = <0x12 0x2>;
- #address-cells = <0x2>;
- #size-cells = <0x1>;
- clock-frequency = <0x0>; /* Filled in by U-Boot
*/
+ dcr-reg = <0x012 0x002>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ /* The ranges property is supplied by the bootwrapper
+ * and is based on the firmware's configuration of the
+ * EBC bridge
+ */
+ clock-frequency = <0>; /* Filled in by U-Boot */
s...@0,0 {
- reg = <0x0 0x0 0x80000>;
+ reg = <0x00000000 0x00000000 0x00080000>;
};
fl...@0,80000 {
compatible = "jedec-flash";
- bank-width = <0x1>;
- reg = <0x0 0x80000 0x80000>;
- #address-cells = <0x1>;
- #size-cells = <0x1>;
-
+ bank-width = <1>;
+ reg = <0x00000000 0x00080000 0x00080000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
partit...@0 {
label = "OpenBIOS";
- reg = <0x0 0x80000>;
+ reg = <0x00000000 0x00080000>;
read-only;
};
};
+
};
};
diff --git a/arch/powerpc/platforms/40x/hcu4.c
b/arch/powerpc/platforms/40x/hcu4.c
index 60b2afe..cd31c53 100644
--- a/arch/powerpc/platforms/40x/hcu4.c
+++ b/arch/powerpc/platforms/40x/hcu4.c
@@ -4,6 +4,10 @@
* code by Gary Thomas, Cort Dougan <c...@fsmlabs.com>, and Dan Malek
* <d...@net4x.com>.
*
+ * HCU4 board specific routines
+ *
+ * Copyright (c) 2009 Niklaus Giger <niklaus.gi...@member.fsf.org>
+ *
* Copyright(c) 1999-2000 Grant Erickson <gr...@lcse.umn.edu>
*
* Rewritten and ported to the merged powerpc tree:
@@ -17,6 +21,7 @@
*/
#include <linux/init.h>
+#include <linux/interrupt.h>
#include <linux/of_platform.h>
#include <asm/machdep.h>
@@ -26,6 +31,24 @@
#include <asm/uic.h>
#include <asm/ppc4xx.h>
+#define MACH_CHIP_SELECT_BASE 0x7C000000
+#define HCU_TICK_CONTROL_REGISTER_ADDRESS (MACH_CHIP_SELECT_BASE + 0x1000000)
+
+/* Bits fuer HCU3/4 Tick-Status- und Control-Register */
+#define TICK_INT_ENABLE 0x01
+#define TICK_INT_RESET 0x02
+#define TICK_INT_PENDING 0x04
+#define TICK_START 0x08
+
+#define TICK_INTERVAL_250_US 0x00
+#define TICK_INTERVAL_500_US 0x10
+#define TICK_INTERVAL_1000_US 0x20
+#define TICK_INTERVAL_2000_US 0x30
+
+#define debug(...)
+
+static u16 __iomem *tickAddr;
+
static __initdata struct of_device_id hcu4_of_bus[] = {
{ .compatible = "ibm,plb3", },
{ .compatible = "ibm,opb", },
@@ -33,11 +56,75 @@ static __initdata struct of_device_id hcu4_of_bus[] = {
{},
};
+static irqreturn_t cpld_interrupt(int irq, void *dev_id)
+{
+ /*
+ out_be16(tickAddr,
+ TICK_INT_ENABLE | TICK_INT_RESET | TICK_START |
+ TICK_INTERVAL_1000_US);
+ */
+ return 0;
+}
+
+static irqreturn_t can1_interrupt(int irq, void *dev_id)
+{
+ return 0;
+}
+
+static irqreturn_t can2_interrupt(int irq, void *dev_id)
+{
+ return 0;
+}
+
+static int map_one_irq(const char *typeName, void *proc)
+{
+ struct device_node *np;
+ int irq = 0;
+ int rc;
+
+ np = of_find_node_by_type(NULL, typeName);
+ debug(KERN_INFO "%s: %s np %p\n", __func__, typeName, np);
+ if (!np) {
+ printk(KERN_INFO "\n\nNo %s found in device tree\n", typeName);
+ return -1;
+ }
+
+ irq = irq_of_parse_and_map(np, 0);
+ debug(KERN_INFO "%s: %s with irq %d\n", __func__, typeName, irq);
+ if (irq == NO_IRQ) {
+ printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", typeName);
+ of_node_put(np);
+ return -ENODEV;
+ }
+ rc = request_irq(irq, proc, IRQF_TRIGGER_LOW,
+ typeName, NULL);
+ debug(KERN_INFO"%s: %s %d rc %d\n",
+ __func__, typeName, irq, rc);
+ return 0;
+}
+
+
static int __init hcu4_device_probe(void)
{
of_platform_bus_probe(NULL, hcu4_of_bus, NULL);
return 0;
}
+
+static int __init hcu4_map_irq(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+ if (!of_flat_dt_is_compatible(root, "netstal,hcu4"))
+ return 0;
+
+ tickAddr = ioremap(HCU_TICK_CONTROL_REGISTER_ADDRESS, 0x100);
+ printk(KERN_INFO "%s: tickAddr is at %p from 0x%x\n", __func__,
+ tickAddr, HCU_TICK_CONTROL_REGISTER_ADDRESS);
+ map_one_irq("cpld", cpld_interrupt);
+ map_one_irq("can1", can1_interrupt);
+ map_one_irq("can2", can2_interrupt);
+ return 1;
+}
+machine_device_initcall(hcu4, hcu4_map_irq);
machine_device_initcall(hcu4, hcu4_device_probe);
static int __init hcu4_probe(void)
--
1.6.3.3
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
