Matthew L. Creech wrote:
I upgraded from 2.6.29 to 2.6.31, and the kernel no longer recognized
the partitions embedded within my DTS file. I had to revert this
change:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=4b08e149c0e02e97ec49c2a31d14a0d3a02f8074
in order to boot. This code looks like it expects all partitions to
be named "partition", otherwise they're just skipped. Is there some
peculiarity in my setup that makes this not work, or is it a general
problem? I see no major differences between my DTS file and the
stardard "mpc8313erdb.dts".
It looks like mpc8313erdb.dts needs to be updated.
That, and Documentation/powerpc/dts-bindings/mtd-physmap.txt, which
still says, "Each node's name represents the name of the corresponding
partition of the flash device," and has examples whose names are not
"partition". :-P
-Scott
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://lists.ozlabs.org/listinfo/linuxppc-dev
