Quoting Scott Wood <scottw...@freescale.com>:
On Fri, Sep 04, 2009 at 12:31:25PM +0200, Roland Lezuo wrote:
The following patch is needed to correctly assign the IRQs for the
gianfar driver on the MPC8313ERDB-revc boards. ERR and TX are swapped
as well as the interrupt lines for the two devices.
And it will incorrectly assign them on older revisions of the chip.
We really should have a u-boot fixup based on SVR.
-Scott
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
I have both versions of the boards and I use two versions of the .dts
file. Actually, four, two to support the old style uboot .dts that
comes with Freescale's BSP and 2 that support the newer uboot.
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
