Hi Wolfgang, On Thu, Jul 16, 2009 at 11:42:26PM +0200, Wolfgang Denk wrote: > This patch adds error checking and prevents clobbering unrelated bits > (reserved bits or the DIS_PREAMBLE bit) when writing the MII_SPEED > register on MPC52xx systems. > > Signed-off-by: Wolfgang Denk <[email protected]> > Cc: Grant Likely <[email protected]> > Cc: Kumar Gala <[email protected]> > Cc: <[email protected]> > --- > drivers/net/fec_mpc52xx.c | 2 +- > drivers/net/fec_mpc52xx_phy.c | 21 ++++++++++++++++++--- > 2 files changed, 19 insertions(+), 4 deletions(-) > > diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c > index cc78633..b69d440 100644 > --- a/drivers/net/fec_mpc52xx.c > +++ b/drivers/net/fec_mpc52xx.c > @@ -639,7 +639,7 @@ static void mpc52xx_fec_hw_init(struct net_device *dev) > /* set phy speed. > * this can't be done in phy driver, since it needs to be called > * before fec stuff (even on resume) */ > - out_be32(&fec->mii_speed, priv->mdio_speed); > + clrsetbits_be32(&fec->mii_speed, 0x7E, priv->mdio_speed); > }
In the probe-function when mdio_speed is set, there is still the old formula
used. Wouldn't that be better in sync?
>
> /**
> diff --git a/drivers/net/fec_mpc52xx_phy.c b/drivers/net/fec_mpc52xx_phy.c
> index 31e6d62..4c33dc5 100644
> --- a/drivers/net/fec_mpc52xx_phy.c
> +++ b/drivers/net/fec_mpc52xx_phy.c
> @@ -70,7 +70,7 @@ static int mpc52xx_fec_mdio_probe(struct of_device *of,
> struct mpc52xx_fec_mdio_priv *priv;
> struct resource res = {};
> int err;
> - int i;
> + int i, clock, speed;
>
> bus = mdiobus_alloc();
> if (bus == NULL)
> @@ -105,8 +105,23 @@ static int mpc52xx_fec_mdio_probe(struct of_device *of,
> dev_set_drvdata(dev, bus);
>
> /* set MII speed */
> - out_be32(&priv->regs->mii_speed,
> - ((mpc5xxx_get_bus_frequency(of->node) >> 20) / 5) << 1);
> + clock = mpc5xxx_get_bus_frequency(of->node);
> + if (!clock) {
> + dev_err(&of->dev, "could not determine IPS/IPB clock\n");
> + goto out_unmap;
> + }
> +
> + /* scale for a MII clock <= 2.5 MHz */
> + speed = (clock + 2499999) / 2500000;
> +
> + /* only 6 bits (25:30) available for MII speed */
> + if (speed > 0x3F) {
> + speed = 0x3F;
> + dev_err(&of->dev, "MII clock (%d Hz) exceeds max (2.5 MHz)\n",
> + clock / speed);
> + }
> +
> + clrsetbits_be32(&priv->regs->mii_speed, 0x7E, speed << 1);
>
> err = of_mdiobus_register(bus, np);
> if (err)
> --
> 1.6.0.6
>
> _______________________________________________
> Linuxppc-dev mailing list
> [email protected]
> https://lists.ozlabs.org/listinfo/linuxppc-dev
Regards,
Wolfram
--
Pengutronix e.K. | Wolfram Sang |
Industrial Linux Solutions | http://www.pengutronix.de/ |
signature.asc
Description: Digital signature
_______________________________________________ Linuxppc-dev mailing list [email protected] https://lists.ozlabs.org/listinfo/linuxppc-dev
