On Wed, May 6, 2009 at 2:15 PM, Wolfgang Denk <w...@denx.de> wrote:
> From: Piotr Ziecik <ko...@semihalf.com>
>
> This patch adds initial version of MPC512x DMA driver.
> Only memory to memory transfers are currenly supported.
>
> Signed-off-by: Piotr Ziecik <ko...@semihalf.com>
> Signed-off-by: Wolfgang Denk <w...@denx.de>
> Cc: Grant Likely <grant.lik...@secretlab.ca>
> Cc: John Rigby <jcri...@gmail.com>
Don't have time to review this in detail right now, but three quick comments:
> drivers/dma/mpc512x_dma.c | 642
> ++++++++++++++++++++++++++
> drivers/dma/mpc512x_dma.h | 192 ++++++++
It looks to me like these two files should be merged.
> diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts
> b/arch/powerpc/boot/dts/mpc5121ads.dts
> index c2d9de9..e7f0e09 100644
> --- a/arch/powerpc/boot/dts/mpc5121ads.dts
> +++ b/arch/powerpc/boot/dts/mpc5121ads.dts
> @@ -373,7 +373,7 @@
> };
>
> ...@14000 {
> - compatible = "fsl,mpc5121-dma2";
> + compatible = "fsl,mpc512x-dma";
Nack. Compatible values should not use wildcards. Be specific. And
be specific about what it is compatible to if another part implements
the same device.
> reg = <0x14000 0x1800>;
> interrupts = <65 0x8>;
> interrupt-parent = < &ipic >;
> diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c
> b/arch/powerpc/platforms/512x/mpc512x_shared.c
> index b776e45..135fd6b 100644
> --- a/arch/powerpc/platforms/512x/mpc512x_shared.c
> +++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
> @@ -95,6 +95,7 @@ void __init mpc512x_init_i2c(void)
> static struct of_device_id __initdata of_bus_ids[] = {
> { .compatible = "fsl,mpc5121-immr", },
> { .compatible = "fsl,mpc5121-localbus", },
> + { .compatible = "fsl,mpc5121-dma", },
This doesn't look right either. Shouldn't the dma device hang off the
IMMR node?
g.
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
