Hi,
This is a draft version of my patch to add Linux support for the Xilinx ML510.
The patch adds support for the board and a pci implementation which allows you
to use onboard pci devices (usb, ide, audio) and pci slots (only slot 3 and 5
for now).
This is an intial version of my work. There is some ide hack in which I need to
submit to the ide list and I guess that I need to make my pci driver OF aware.
Regards,
Roderick Colenbrander
--
Neu: GMX FreeDSL Komplettanschluss mit DSL 6.000 Flatrate + Telefonanschluss
für nur 17,95 Euro/mtl.!* http://dsl.gmx.de/?ac=OM.AD.PD003K11308T4569a
diff -urN -X linux-2.6.29/Documentation/dontdiff linux-2.6.29/arch/powerpc/boot/dts/virtex440-ml510.dts ml510-dev/linux-2.6.29/arch/powerpc/boot/dts/virtex440-ml510.dts
--- linux-2.6.29/arch/powerpc/boot/dts/virtex440-ml510.dts 1970-01-01 01:00:00.000000000 +0100
+++ ml510-dev/linux-2.6.29/arch/powerpc/boot/dts/virtex440-ml510.dts 2009-04-01 13:18:50.000000000 +0200
@@ -0,0 +1,452 @@
+/*
+ * Xilinx ML510 Reference Design support
+ * This DTS file was created for the ml510_bsb1_pcores_ppc440 reference design.
+ * The reference design contains two bugs which prevent PCI from working which
+ * should be fixed by the user:
+ * - the MPLB output of the soft-core should be connected to plbv46_plb_1 which
+ * corresponds to SPLB0 of the ppc440 to allow the soft-core to access system
+ * memory
+ * - C_IPIFBAR2PCIBAR_0 of the soft-core should be set to 0x80000000 in order to
+ * reserve 0x80000000-0xffffffff (PCI) for memory mapped i/o and the lower addresses
+ * can be used by PCI devices to access system memory (DMA).
+ *
+ * Copyright 2009, Roderick Colenbrander
+ */
+
+/dts-v1/;
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,ml510-ref-design";
+ dcr-parent = <&ppc440_0>;
+ model = "testing";
+ DDR2_SDRAM_DIMM0: mem...@0 {
+ device_type = "memory";
+ reg = < 0x0 0x20000000 >;
+ } ;
+ chosen {
+ bootargs = "console=ttyS0 root=/dev/xsa2 init=/etc/preinit";
+ linux,stdout-path = "/p...@0/ser...@83e00000";
+ } ;
+ cpus {
+ #address-cells = <1>;
+ #cpus = <0x1>;
+ #size-cells = <0>;
+ ppc440_0: c...@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clock-frequency = <300000000>;
+ compatible = "PowerPC,440", "ibm,ppc440";
+ d-cache-line-size = <0x20>;
+ d-cache-size = <0x8000>;
+ dcr-access-method = "native";
+ dcr-controller ;
+ device_type = "cpu";
+ i-cache-line-size = <0x20>;
+ i-cache-size = <0x8000>;
+ model = "PowerPC,440";
+ reg = <0>;
+ timebase-frequency = <300000000>;
+ xlnx,apu-control = <0x2000>;
+ xlnx,apu-udi-0 = <0x0>;
+ xlnx,apu-udi-1 = <0x0>;
+ xlnx,apu-udi-10 = <0x0>;
+ xlnx,apu-udi-11 = <0x0>;
+ xlnx,apu-udi-12 = <0x0>;
+ xlnx,apu-udi-13 = <0x0>;
+ xlnx,apu-udi-14 = <0x0>;
+ xlnx,apu-udi-15 = <0x0>;
+ xlnx,apu-udi-2 = <0x0>;
+ xlnx,apu-udi-3 = <0x0>;
+ xlnx,apu-udi-4 = <0x0>;
+ xlnx,apu-udi-5 = <0x0>;
+ xlnx,apu-udi-6 = <0x0>;
+ xlnx,apu-udi-7 = <0x0>;
+ xlnx,apu-udi-8 = <0x0>;
+ xlnx,apu-udi-9 = <0x0>;
+ xlnx,dcr-autolock-enable = <0x1>;
+ xlnx,dcu-rd-ld-cache-plb-prio = <0x0>;
+ xlnx,dcu-rd-noncache-plb-prio = <0x0>;
+ xlnx,dcu-rd-touch-plb-prio = <0x0>;
+ xlnx,dcu-rd-urgent-plb-prio = <0x0>;
+ xlnx,dcu-wr-flush-plb-prio = <0x0>;
+ xlnx,dcu-wr-store-plb-prio = <0x0>;
+ xlnx,dcu-wr-urgent-plb-prio = <0x0>;
+ xlnx,dma0-control = <0x0>;
+ xlnx,dma0-plb-prio = <0x0>;
+ xlnx,dma0-rxchannelctrl = <0x1010000>;
+ xlnx,dma0-rxirqtimer = <0x3ff>;
+ xlnx,dma0-txchannelctrl = <0x1010000>;
+ xlnx,dma0-txirqtimer = <0x3ff>;
+ xlnx,dma1-control = <0x0>;
+ xlnx,dma1-plb-prio = <0x0>;
+ xlnx,dma1-rxchannelctrl = <0x1010000>;
+ xlnx,dma1-rxirqtimer = <0x3ff>;
+ xlnx,dma1-txchannelctrl = <0x1010000>;
+ xlnx,dma1-txirqtimer = <0x3ff>;
+ xlnx,dma2-control = <0x0>;
+ xlnx,dma2-plb-prio = <0x0>;
+ xlnx,dma2-rxchannelctrl = <0x1010000>;
+ xlnx,dma2-rxirqtimer = <0x3ff>;
+ xlnx,dma2-txchannelctrl = <0x1010000>;
+ xlnx,dma2-txirqtimer = <0x3ff>;
+ xlnx,dma3-control = <0x0>;
+ xlnx,dma3-plb-prio = <0x0>;
+ xlnx,dma3-rxchannelctrl = <0x1010000>;
+ xlnx,dma3-rxirqtimer = <0x3ff>;
+ xlnx,dma3-txchannelctrl = <0x1010000>;
+ xlnx,dma3-txirqtimer = <0x3ff>;
+ xlnx,endian-reset = <0x0>;
+ xlnx,generate-plb-timespecs = <0x1>;
+ xlnx,icu-rd-fetch-plb-prio = <0x0>;
+ xlnx,icu-rd-spec-plb-prio = <0x0>;
+ xlnx,icu-rd-touch-plb-prio = <0x0>;
+ xlnx,interconnect-imask = <0xffffffff>;
+ xlnx,mplb-allow-lock-xfer = <0x1>;
+ xlnx,mplb-arb-mode = <0x0>;
+ xlnx,mplb-awidth = <0x20>;
+ xlnx,mplb-counter = <0x500>;
+ xlnx,mplb-dwidth = <0x80>;
+ xlnx,mplb-max-burst = <0x8>;
+ xlnx,mplb-native-dwidth = <0x80>;
+ xlnx,mplb-p2p = <0x0>;
+ xlnx,mplb-prio-dcur = <0x2>;
+ xlnx,mplb-prio-dcuw = <0x3>;
+ xlnx,mplb-prio-icu = <0x4>;
+ xlnx,mplb-prio-splb0 = <0x1>;
+ xlnx,mplb-prio-splb1 = <0x0>;
+ xlnx,mplb-read-pipe-enable = <0x1>;
+ xlnx,mplb-sync-tattribute = <0x0>;
+ xlnx,mplb-wdog-enable = <0x1>;
+ xlnx,mplb-write-pipe-enable = <0x1>;
+ xlnx,mplb-write-post-enable = <0x1>;
+ xlnx,num-dma = <0x0>;
+ xlnx,pir = <0xf>;
+ xlnx,ppc440mc-addr-base = <0x0>;
+ xlnx,ppc440mc-addr-high = <0x1fffffff>;
+ xlnx,ppc440mc-arb-mode = <0x0>;
+ xlnx,ppc440mc-bank-conflict-mask = <0x1800000>;
+ xlnx,ppc440mc-control = <0xf810008f>;
+ xlnx,ppc440mc-max-burst = <0x8>;
+ xlnx,ppc440mc-prio-dcur = <0x2>;
+ xlnx,ppc440mc-prio-dcuw = <0x3>;
+ xlnx,ppc440mc-prio-icu = <0x4>;
+ xlnx,ppc440mc-prio-splb0 = <0x1>;
+ xlnx,ppc440mc-prio-splb1 = <0x0>;
+ xlnx,ppc440mc-row-conflict-mask = <0x7ffe00>;
+ xlnx,ppcdm-asyncmode = <0x0>;
+ xlnx,ppcds-asyncmode = <0x0>;
+ xlnx,user-reset = <0x0>;
+ } ;
+ } ;
+ plb_v46_0: p...@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,plb-v46-1.03.a", "simple-bus";
+ ranges ;
+ FLASH: fl...@fc000000 {
+ bank-width = <2>;
+ compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
+ reg = < 0xfc000000 0x2000000 >;
+ xlnx,family = "virtex5";
+ xlnx,include-datawidth-matching-0 = <0x1>;
+ xlnx,include-datawidth-matching-1 = <0x0>;
+ xlnx,include-datawidth-matching-2 = <0x0>;
+ xlnx,include-datawidth-matching-3 = <0x0>;
+ xlnx,include-negedge-ioregs = <0x0>;
+ xlnx,include-plb-ipif = <0x1>;
+ xlnx,include-wrbuf = <0x1>;
+ xlnx,max-mem-width = <0x10>;
+ xlnx,mch-native-dwidth = <0x20>;
+ xlnx,mch-plb-clk-period-ps = <0x2710>;
+ xlnx,mch-splb-awidth = <0x20>;
+ xlnx,mch0-accessbuf-depth = <0x10>;
+ xlnx,mch0-protocol = <0x0>;
+ xlnx,mch0-rddatabuf-depth = <0x10>;
+ xlnx,mch1-accessbuf-depth = <0x10>;
+ xlnx,mch1-protocol = <0x0>;
+ xlnx,mch1-rddatabuf-depth = <0x10>;
+ xlnx,mch2-accessbuf-depth = <0x10>;
+ xlnx,mch2-protocol = <0x0>;
+ xlnx,mch2-rddatabuf-depth = <0x10>;
+ xlnx,mch3-accessbuf-depth = <0x10>;
+ xlnx,mch3-protocol = <0x0>;
+ xlnx,mch3-rddatabuf-depth = <0x10>;
+ xlnx,mem0-width = <0x10>;
+ xlnx,mem1-width = <0x20>;
+ xlnx,mem2-width = <0x20>;
+ xlnx,mem3-width = <0x20>;
+ xlnx,num-banks-mem = <0x1>;
+ xlnx,num-channels = <0x2>;
+ xlnx,priority-mode = <0x0>;
+ xlnx,synch-mem-0 = <0x0>;
+ xlnx,synch-mem-1 = <0x0>;
+ xlnx,synch-mem-2 = <0x0>;
+ xlnx,synch-mem-3 = <0x0>;
+ xlnx,synch-pipedelay-0 = <0x2>;
+ xlnx,synch-pipedelay-1 = <0x2>;
+ xlnx,synch-pipedelay-2 = <0x2>;
+ xlnx,synch-pipedelay-3 = <0x2>;
+ xlnx,tavdv-ps-mem-0 = <0x1adb0>;
+ xlnx,tavdv-ps-mem-1 = <0x3a98>;
+ xlnx,tavdv-ps-mem-2 = <0x3a98>;
+ xlnx,tavdv-ps-mem-3 = <0x3a98>;
+ xlnx,tcedv-ps-mem-0 = <0x1adb0>;
+ xlnx,tcedv-ps-mem-1 = <0x3a98>;
+ xlnx,tcedv-ps-mem-2 = <0x3a98>;
+ xlnx,tcedv-ps-mem-3 = <0x3a98>;
+ xlnx,thzce-ps-mem-0 = <0x88b8>;
+ xlnx,thzce-ps-mem-1 = <0x1b58>;
+ xlnx,thzce-ps-mem-2 = <0x1b58>;
+ xlnx,thzce-ps-mem-3 = <0x1b58>;
+ xlnx,thzoe-ps-mem-0 = <0x1b58>;
+ xlnx,thzoe-ps-mem-1 = <0x1b58>;
+ xlnx,thzoe-ps-mem-2 = <0x1b58>;
+ xlnx,thzoe-ps-mem-3 = <0x1b58>;
+ xlnx,tlzwe-ps-mem-0 = <0x88b8>;
+ xlnx,tlzwe-ps-mem-1 = <0x0>;
+ xlnx,tlzwe-ps-mem-2 = <0x0>;
+ xlnx,tlzwe-ps-mem-3 = <0x0>;
+ xlnx,twc-ps-mem-0 = <0x1adb0>;
+ xlnx,twc-ps-mem-1 = <0x3a98>;
+ xlnx,twc-ps-mem-2 = <0x3a98>;
+ xlnx,twc-ps-mem-3 = <0x3a98>;
+ xlnx,twp-ps-mem-0 = <0x11170>;
+ xlnx,twp-ps-mem-1 = <0x2ee0>;
+ xlnx,twp-ps-mem-2 = <0x2ee0>;
+ xlnx,twp-ps-mem-3 = <0x2ee0>;
+ xlnx,xcl0-linesize = <0x4>;
+ xlnx,xcl0-writexfer = <0x1>;
+ xlnx,xcl1-linesize = <0x4>;
+ xlnx,xcl1-writexfer = <0x1>;
+ xlnx,xcl2-linesize = <0x4>;
+ xlnx,xcl2-writexfer = <0x1>;
+ xlnx,xcl3-linesize = <0x4>;
+ xlnx,xcl3-writexfer = <0x1>;
+ } ;
+ Hard_Ethernet_MAC: xps-ll-te...@81c00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,compound";
+ ether...@81c00000 {
+ compatible = "xlnx,xps-ll-temac-1.01.b";
+ device_type = "network";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 8 2 >;
+ llink-connected = <&Hard_Ethernet_MAC_fifo>;
+ local-mac-address = [ 02 00 00 00 00 00 ];
+ reg = < 0x81c00000 0x40 >;
+ xlnx,bus2core-clk-ratio = <0x1>;
+ xlnx,phy-type = <0x3>;
+ xlnx,phyaddr = <0x1>;
+ xlnx,rxcsum = <0x0>;
+ xlnx,rxfifo = <0x8000>;
+ xlnx,temac-type = <0x0>;
+ xlnx,txcsum = <0x0>;
+ xlnx,txfifo = <0x8000>;
+ } ;
+ } ;
+ Hard_Ethernet_MAC_fifo: xps-ll-f...@81a00000 {
+ compatible = "xlnx,xps-ll-fifo-1.01.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 6 2 >;
+ reg = < 0x81a00000 0x10000 >;
+ xlnx,family = "virtex5";
+ } ;
+ IIC_EEPROM: i...@81600000 {
+ compatible = "xlnx,xps-iic-2.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 9 2 >;
+ reg = < 0x81600000 0x10000 >;
+ xlnx,clk-freq = <0x5f5e100>;
+ xlnx,family = "virtex5";
+ xlnx,gpo-width = <0x1>;
+ xlnx,iic-freq = <0x186a0>;
+ xlnx,scl-inertial-delay = <0x5>;
+ xlnx,sda-inertial-delay = <0x5>;
+ xlnx,ten-bit-adr = <0x0>;
+ } ;
+ LCD_OPTIONAL: g...@81420000 {
+ compatible = "xlnx,xps-gpio-1.00.a";
+ reg = < 0x81420000 0x10000 >;
+ xlnx,all-inputs = <0x0>;
+ xlnx,all-inputs-2 = <0x0>;
+ xlnx,dout-default = <0x0>;
+ xlnx,dout-default-2 = <0x0>;
+ xlnx,family = "virtex5";
+ xlnx,gpio-width = <0xb>;
+ xlnx,interrupt-present = <0x0>;
+ xlnx,is-bidir = <0x1>;
+ xlnx,is-bidir-2 = <0x1>;
+ xlnx,is-dual = <0x0>;
+ xlnx,tri-default = <0xffffffff>;
+ xlnx,tri-default-2 = <0xffffffff>;
+ } ;
+ LEDs_4Bit: g...@81400000 {
+ compatible = "xlnx,xps-gpio-1.00.a";
+ reg = < 0x81400000 0x10000 >;
+ xlnx,all-inputs = <0x0>;
+ xlnx,all-inputs-2 = <0x0>;
+ xlnx,dout-default = <0x0>;
+ xlnx,dout-default-2 = <0x0>;
+ xlnx,family = "virtex5";
+ xlnx,gpio-width = <0x4>;
+ xlnx,interrupt-present = <0x0>;
+ xlnx,is-bidir = <0x1>;
+ xlnx,is-bidir-2 = <0x1>;
+ xlnx,is-dual = <0x0>;
+ xlnx,tri-default = <0xffffffff>;
+ xlnx,tri-default-2 = <0xffffffff>;
+ } ;
+ RS232_Uart_1: ser...@83e00000 {
+ clock-frequency = <100000000>;
+ compatible = "xlnx,xps-uart16550-2.00.b", "ns16550";
+ current-speed = <9600>;
+ device_type = "serial";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 11 2 >;
+ reg = < 0x83e00000 0x10000 >;
+ reg-offset = <0x1003>;
+ reg-shift = <2>;
+ xlnx,family = "virtex5";
+ xlnx,has-external-rclk = <0x0>;
+ xlnx,has-external-xin = <0x0>;
+ xlnx,is-a-16550 = <0x1>;
+ } ;
+ SPI_EEPROM: xps-...@feff8000 {
+ compatible = "xlnx,xps-spi-2.00.b";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 10 2 >;
+ reg = < 0xfeff8000 0x80 >;
+ xlnx,family = "virtex5";
+ xlnx,fifo-exist = <0x1>;
+ xlnx,num-ss-bits = <0x1>;
+ xlnx,num-transfer-bits = <0x8>;
+ xlnx,sck-ratio = <0x80>;
+ } ;
+ SysACE_CompactFlash: sys...@83600000 {
+ compatible = "xlnx,xps-sysace-1.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 7 2 >;
+ reg = < 0x83600000 0x10000 >;
+ xlnx,family = "virtex5";
+ xlnx,mem-width = <0x10>;
+ } ;
+ dcr_v29_0: d...@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,dcr-v29-1.00.a", "simple-bus";
+ ranges = < 0x0 0x44a00000 0x1000 >;
+ } ;
+ plbv46_dcr_bridge_0: plbv46-dcr-bri...@44a00000 {
+ compatible = "xlnx,plbv46-dcr-bridge-1.00.a";
+ dcr-access-method = "mmio";
+ dcr-controller ;
+ dcr-mmio-range = < 0x44a00000 0x1000 >;
+ dcr-mmio-stride = <4>;
+ reg = < 0x44a00000 0x1000 >;
+ xlnx,family = "virtex5";
+ } ;
+ plbv46_dvi_cntlr_0: plbv46-dvi-cn...@c9800000 {
+ compatible = "xlnx,plbv46-dvi-cntlr-1.00.a";
+ dcr-parent = <&plbv46_dcr_bridge_0>;
+ dcr-reg = < 0x100 0x4 >;
+ reg = < 0xc9800000 0x10000 >;
+ xlnx,default-tft-base-addr = <0x0>;
+ xlnx,dps-init = <0x1>;
+ xlnx,family = "virtex5";
+ xlnx,mplb-awidth = <0x20>;
+ xlnx,mplb-clk-period-ps = <0x2710>;
+ xlnx,mplb-dwidth = <0x80>;
+ xlnx,mplb-native-dwidth = <0x40>;
+ xlnx,mplb-p2p = <0x1>;
+ xlnx,mplb-smallest-slave = <0x80>;
+ xlnx,on-init = <0x1>;
+ } ;
+ plbv46_pci_0: plbv46-...@85e00000 {
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "xlnx,plbv46-pci-1.03.a";
+ device_type = "pci";
+ reg = < 0x85e00000 0x10000 >; /* addr is at +0x10c, data at +0x110 */
+
+ /* The PCI bus is implemented by a soft-core which is connected to the PLB bus which is seen by the CPU at 0xa0000000.
+ * Both the PLB and PCI have their own address domain. The PCI soft-core performs this translation. The Xilinx plbpci doc
+ * mentions 'the number of high-order bits substituted in the PLB address presented to the bridge is given by the number
+ * of bits that are the SAME between C_IPIFBAR_N and C_IPIF_HIGHADDR_N.'
+ *
+ * For the default ml510_bsb1_pcores_ppc440 reference design this means:
+ * C_IPIFBAR_0 = 0xa0000000
+ * C_IPIF_HIGHADDR_0 = 0xbfffffff <- only the last 3 bits of (0xa=1010b, 0xb=1011b) are similar
+ * C_IPIFBAR2PCIBAR_0 = 0x00000000
+ *
+ * C_IPIFBAR_1 = 0x94000000
+ * C_IPIF_HIGHADDR_1 = 0x97ffffff <- only the last 6 bits are similar
+ * C_IPIFBAR2PCIBAR_1 = 0x00000000
+ *
+ * This means that a CPU write to 0xa0001234 translates to 0x00001234 on the PCI bus and that
+ * the pcibar_0 base and pcibar_1 base are zero. In order to prevent collision between inbound
+ * and outbound memory reads/writes C_IPIFBAR2PCIBAR_0 needs to be set to 0x80000000.
+ */
+ ranges = <0x02000000 0x00000000 0x80000000 0xa0000000 0x00000000 0x20000000
+ 0x01000000 0x00000000 0x00000000 0x94000000 0x00000000 0x00010000>;
+
+ #interrupt-cells = <1>;
+ interrupt-parent = <&xps_intc_0>;
+ interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x15 / dev=5, bus=0 / PCI slot 5 */
+ /* pci irq a is connected to xintc irq 5, b to 4, c to 3 and d to 2 */
+ /* According to the datasheet + schematic ABCD [FPGA] of slot 5 is mapped to DABC, testing showed that at least A maps to B */
+ 0x2800 0 0 1 &xps_intc_0 4 2
+// 0x2800 0 0 2 &xps_intc_0 5 2
+// 0x2800 0 0 3 &xps_intc_0 4 2
+// 0x2800 0 0 4 &xps_intc_0 3 2
+
+ /* IDSEL 0x16 / dev=6, bus=0 / PCI slot 3 */
+ 0x3000 0 0 1 &xps_intc_0 3 2
+ 0x3000 0 0 2 &xps_intc_0 2 2
+ 0x3000 0 0 3 &xps_intc_0 5 2
+ 0x3000 0 0 4 &xps_intc_0 4 2
+
+ /* IDSEL 0x11 / dev=1, bus=0 / AC97 audio */
+ 0x0800 0 0 1 &i8259 7 2
+
+ /* IDSEL 0x1b / dev=11, bus=0 / IDE */
+ 0x5800 0 0 1 &i8259 14 2
+
+ /* IDSEL 0x1f / dev 15, bus=0 / USB */
+ 0x7800 0 0 1 &i8259 7 2
+ >;
+ ali_m1533 {
+ #size-cells = <1>;
+ #address-cells = <2>;
+ i8259: interrupt-control...@20 {
+ reg = <1 0x20 2
+ 1 0xa0 2
+ 1 0x4d0 2>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ compatible = "chrp,iic";
+
+ interrupts = <1 2>;
+ interrupt-parent = <&xps_intc_0>;
+ };
+ };
+ } ;
+ xps_bram_if_cntlr_1: xps-bram-if-cn...@ffff0000 {
+ compatible = "xlnx,xps-bram-if-cntlr-1.00.a";
+ reg = < 0xffff0000 0x10000 >;
+ xlnx,family = "virtex5";
+ } ;
+ xps_intc_0: interrupt-control...@81800000 {
+ #interrupt-cells = <0x2>;
+ compatible = "xlnx,xps-intc-1.00.a";
+ interrupt-controller ;
+ reg = < 0x81800000 0x10000 >;
+ xlnx,num-intr-inputs = <0xc>;
+ } ;
+ } ;
+} ;
Binary files linux-2.6.29/arch/powerpc/boot/simpleImage.virtex440-ml510 and ml510-dev/linux-2.6.29/arch/powerpc/boot/simpleImage.virtex440-ml510 differ
diff -urN -X linux-2.6.29/Documentation/dontdiff linux-2.6.29/arch/powerpc/configs/44x/virtex5_defconfig ml510-dev/linux-2.6.29/arch/powerpc/configs/44x/virtex5_defconfig
--- linux-2.6.29/arch/powerpc/configs/44x/virtex5_defconfig 2009-03-24 00:12:14.000000000 +0100
+++ ml510-dev/linux-2.6.29/arch/powerpc/configs/44x/virtex5_defconfig 2009-04-01 13:20:29.000000000 +0200
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:49 2009
+# Linux kernel version: 2.6.29
+# Wed Apr 1 13:20:29 2009
#
# CONFIG_PPC64 is not set
@@ -75,6 +75,15 @@
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@@ -88,10 +97,12 @@
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
@@ -101,10 +112,8 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -113,6 +122,7 @@
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
@@ -152,13 +162,9 @@
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
+CONFIG_XILINX_VIRTEX_PCI=y
#
# Platform support
@@ -179,6 +185,7 @@
# CONFIG_GLACIER is not set
# CONFIG_YOSEMITE is not set
CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y
+CONFIG_XILINX_ML510=y
# CONFIG_PPC44x_SIMPLE is not set
# CONFIG_PPC4xx_GPIO is not set
CONFIG_XILINX_VIRTEX=y
@@ -186,7 +193,7 @@
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
+CONFIG_PPC_I8259=y
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
# CONFIG_PPC_MPC106 is not set
@@ -290,7 +297,6 @@
#
# Networking options
#
-# CONFIG_NET_NS is not set
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
@@ -499,12 +505,16 @@
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -545,6 +555,7 @@
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC is not set
@@ -578,6 +589,7 @@
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -637,7 +649,6 @@
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
diff -urN -X linux-2.6.29/Documentation/dontdiff linux-2.6.29/arch/powerpc/platforms/44x/Kconfig ml510-dev/linux-2.6.29/arch/powerpc/platforms/44x/Kconfig
--- linux-2.6.29/arch/powerpc/platforms/44x/Kconfig 2009-03-24 00:12:14.000000000 +0100
+++ ml510-dev/linux-2.6.29/arch/powerpc/platforms/44x/Kconfig 2009-03-27 15:50:28.000000000 +0100
@@ -160,6 +160,16 @@
Most Virtex 5 designs should use this unless it needs to do some
special configuration at board probe time.
+config XILINX_ML510
+ bool "Xilinx ML510 Reference Design support"
+ depends on 44x
+ default n
+ select XILINX_VIRTEX_5_FXT
+ select PPC_PCI_CHOICE
+ select XILINX_VIRTEX_PCI if PCI
+ select PPC_INDIRECT_PCI if PCI
+ select PPC_I8259 if PCI
+
config PPC44x_SIMPLE
bool "Simple PowerPC 44x board support"
depends on 44x
@@ -232,4 +242,3 @@
config XILINX_VIRTEX_5_FXT
bool
select XILINX_VIRTEX
-
diff -urN -X linux-2.6.29/Documentation/dontdiff linux-2.6.29/arch/powerpc/platforms/44x/Makefile ml510-dev/linux-2.6.29/arch/powerpc/platforms/44x/Makefile
--- linux-2.6.29/arch/powerpc/platforms/44x/Makefile 2009-03-24 00:12:14.000000000 +0100
+++ ml510-dev/linux-2.6.29/arch/powerpc/platforms/44x/Makefile 2009-04-01 11:59:28.000000000 +0200
@@ -4,3 +4,4 @@
obj-$(CONFIG_SAM440EP) += sam440ep.o
obj-$(CONFIG_WARP) += warp.o
obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
+obj-$(CONFIG_XILINX_ML510) += ml510.o
\ No newline at end of file
diff -urN -X linux-2.6.29/Documentation/dontdiff linux-2.6.29/arch/powerpc/platforms/44x/ml510.c ml510-dev/linux-2.6.29/arch/powerpc/platforms/44x/ml510.c
--- linux-2.6.29/arch/powerpc/platforms/44x/ml510.c 1970-01-01 01:00:00.000000000 +0100
+++ ml510-dev/linux-2.6.29/arch/powerpc/platforms/44x/ml510.c 2009-04-01 12:42:28.000000000 +0200
@@ -0,0 +1,161 @@
+/*
+ * Xilinx ML510 Reference Design support, derived from
+ * the generic Xilinx Virtex 5 board support
+ *
+ * Copyright 2007 Secret Lab Technologies Ltd.
+ * Copyright 2008 Xilinx, Inc.
+ * Copyright 2009 Roderick Colenbrander
+ *
+ * The i8259 cascade code was derived from 86xx/pic.c which is copyrighted by Freescale Semiconductor, Inc.
+ * Xilinx ML510 PCI initialization code, derived from the Xilinx ML300/ML410 based board support.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+#include <asm/xilinx_intc.h>
+#include <asm/reg.h>
+#include <asm/ppc4xx.h>
+#ifdef CONFIG_PPC_I8259
+#include <asm/i8259.h>
+#endif
+#ifdef CONFIG_PCI
+#include <linux/pci.h>
+#endif
+#include "44x.h"
+
+static struct of_device_id xilinx_of_bus_ids[] __initdata = {
+ { .compatible = "simple-bus", },
+ { .compatible = "xlnx,plb-v46-1.00.a", },
+ { .compatible = "xlnx,plb-v46-1.02.a", },
+ { .compatible = "xlnx,plb-v34-1.01.a", },
+ { .compatible = "xlnx,plb-v34-1.02.a", },
+ { .compatible = "xlnx,opb-v20-1.10.c", },
+ { .compatible = "xlnx,dcr-v29-1.00.a", },
+ { .compatible = "xlnx,compound", },
+ {}
+};
+
+#ifdef CONFIG_PPC_I8259
+static void ml510_8259_cascade(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned int cascade_irq = i8259_irq();
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq);
+
+ /* Let xilinx_intc end the interrupt */
+ desc->chip->ack(irq);
+ desc->chip->unmask(irq);
+}
+
+static void __init ml510_setup_i8259_cascade(void)
+{
+ struct device_node *np, *cascade_node = NULL;
+ int cascade_irq;
+
+ /* Initialize i8259 controller */
+ for_each_node_by_type(np, "interrupt-controller")
+ if (of_device_is_compatible(np, "chrp,iic")) {
+ cascade_node = np;
+ break;
+ }
+
+ if (cascade_node == NULL) {
+ printk(KERN_DEBUG "Could not find i8259 PIC\n");
+ return;
+ }
+
+ cascade_irq = irq_of_parse_and_map(cascade_node, 0);
+ if (cascade_irq == NO_IRQ) {
+ printk(KERN_ERR "Failed to map cascade interrupt\n");
+ return;
+ }
+
+ i8259_init(cascade_node, 0);
+
+ of_node_put(cascade_node);
+ set_irq_chained_handler(cascade_irq, ml510_8259_cascade);
+}
+#endif /* CONFIG_PPC_I8259 */
+
+#ifdef CONFIG_PCI
+static void __devinit ali_quirk(struct pci_dev *dev)
+{
+ /* Enable the IDE controller */
+ pci_write_config_byte(dev, 0x58, 0x4c);
+ /* Assign irq 14 to the primary ide channel */
+ pci_write_config_byte(dev, 0x44, 0x0d);
+ /* Assign irq 15 to the secondary ide channel */
+ pci_write_config_byte(dev, 0x75, 0x0f);
+ /* Set the ide controller in native mode */
+ pci_write_config_byte(dev, 0x09, 0xff);
+
+ pci_write_config_byte(dev, 0x48, 0x00); // INTB = disabled, INTA = disabled
+ pci_write_config_byte(dev, 0x4a, 0x00); // INTD = disabled, INTC = disabled
+ pci_write_config_byte(dev, 0x4b, 0x00); // Audio = INT7, Modem = disabled.
+ pci_write_config_byte(dev, 0x74, 0x06); // USB = INT7
+}
+DECLARE_PCI_FIXUP_EARLY(0x10b9, 0x1533, ali_quirk);
+#endif /* CONFIG_PCI */
+
+static int __init ml510_device_probe(void)
+{
+ of_platform_bus_probe(NULL, xilinx_of_bus_ids, NULL);
+
+ return 0;
+}
+machine_device_initcall(ml510, ml510_device_probe);
+
+static int __init ml510_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (!of_flat_dt_is_compatible(root, "xlnx,ml510-ref-design"))
+ return 0;
+
+ return 1;
+}
+
+void virtex_pci_init(void);
+static void __init ml510_setup_arch(void)
+{
+ struct device_node *pci_node = of_find_compatible_node(NULL, NULL, "xlnx,plbv46-pci-1.03.a");
+
+#ifdef CONFIG_PCI
+ if(pci_node)
+ {
+//Is this the right way or should this be done using OF?
+ /* Register the host bridge */
+ virtex_pci_init();
+ }
+#endif /* CONFIG_PCI */
+}
+
+static void ml510_init_IRQ(void)
+{
+ xilinx_intc_init_tree();
+
+#ifdef CONFIG_PPC_I8259
+ /* The devices on the ALI M1553 south bridge are connected to an internal i8259 */
+ ml510_setup_i8259_cascade();
+ /* Program irq 7 (usb/audio), 14/15 (ide) to level sensitive */
+ outb(0xc0, 0x4d0);
+ outb(0xc0, 0x4d1);
+#endif /* CONFIG_PPC_I8259 */
+}
+
+define_machine(ml510) {
+ .name = "Xilinx ML510 Reference Design support",
+ .probe = ml510_probe,
+ .setup_arch = ml510_setup_arch,
+ .init_IRQ = ml510_init_IRQ,
+ .get_irq = xilinx_intc_get_irq,
+ .calibrate_decr = generic_calibrate_decr,
+ .restart = ppc4xx_reset_system,
+};
diff -urN -X linux-2.6.29/Documentation/dontdiff linux-2.6.29/arch/powerpc/sysdev/Kconfig ml510-dev/linux-2.6.29/arch/powerpc/sysdev/Kconfig
--- linux-2.6.29/arch/powerpc/sysdev/Kconfig 2009-03-24 00:12:14.000000000 +0100
+++ ml510-dev/linux-2.6.29/arch/powerpc/sysdev/Kconfig 2009-03-27 12:50:29.000000000 +0100
@@ -12,3 +12,7 @@
depends on PCI_MSI
default y if MPIC
default y if FSL_PCI
+
+config XILINX_VIRTEX_PCI
+ bool
+ depends on PCI
diff -urN -X linux-2.6.29/Documentation/dontdiff linux-2.6.29/arch/powerpc/sysdev/Makefile ml510-dev/linux-2.6.29/arch/powerpc/sysdev/Makefile
--- linux-2.6.29/arch/powerpc/sysdev/Makefile 2009-03-24 00:12:14.000000000 +0100
+++ ml510-dev/linux-2.6.29/arch/powerpc/sysdev/Makefile 2009-03-27 11:57:45.000000000 +0100
@@ -34,6 +34,7 @@
obj-$(CONFIG_4xx) += uic.o
obj-$(CONFIG_4xx_SOC) += ppc4xx_soc.o
obj-$(CONFIG_XILINX_VIRTEX) += xilinx_intc.o
+obj-$(CONFIG_XILINX_VIRTEX_PCI) += virtex_pci.o
obj-$(CONFIG_OF_RTC) += of_rtc.o
ifeq ($(CONFIG_PCI),y)
obj-$(CONFIG_4xx) += ppc4xx_pci.o
diff -urN -X linux-2.6.29/Documentation/dontdiff linux-2.6.29/arch/powerpc/sysdev/virtex_pci.c ml510-dev/linux-2.6.29/arch/powerpc/sysdev/virtex_pci.c
--- linux-2.6.29/arch/powerpc/sysdev/virtex_pci.c 1970-01-01 01:00:00.000000000 +0100
+++ ml510-dev/linux-2.6.29/arch/powerpc/sysdev/virtex_pci.c 2009-04-01 12:54:42.000000000 +0200
@@ -0,0 +1,95 @@
+/*
+ * PCI support for Xilinx plbv46_pci soft-core which can be used on Xilinx Virtex ML410 / ML510 boards.
+ *
+ * Copyright 2009 Roderick Colenbrander
+ *
+ * The pci bridge fixup code was copied from ppc4xx_pci.c and was written by Benjamin Herrenschmidt.
+ * Copyright 2007 Ben. Herrenschmidt <b...@kernel.crashing.org>, IBM Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/pci.h>
+#include <mm/mmu_decl.h>
+#include <asm/io.h>
+
+#define XPLB_PCI_ADDR 0x10c
+#define XPLB_PCI_DATA 0x110
+#define XPLB_PCI_BUS 0x114
+
+#define PCI_HOST_ENABLE_CMD PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY
+
+static void fixup_virtex_pci_bridge(struct pci_dev *dev)
+{
+ struct pci_controller *hose;
+ int i;
+
+ if (dev->devfn != 0 || dev->bus->self != NULL)
+ return;
+
+ hose = pci_bus_to_host(dev->bus);
+ if (hose == NULL)
+ return;
+
+ if(!of_device_is_compatible(hose->dn, "xlnx,plbv46-pci-1.03.a"))
+ return;
+
+ /* Hide the PCI host BARs from the kernel as their content doesn't
+ * fit well in the resource management
+ */
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+ dev->resource[i].start = dev->resource[i].end = 0;
+ dev->resource[i].flags = 0;
+ }
+
+ printk(KERN_INFO "PCI: Hiding Xilinx plb-pci host bridge resources %s\n",
+ pci_name(dev));
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, fixup_virtex_pci_bridge);
+
+void virtex_pci_init(void)
+{
+ struct device_node *pci_node = of_find_compatible_node(NULL, NULL, "xlnx,plbv46-pci-1.03.a");
+
+ if(pci_node)
+ {
+ struct pci_controller *hose;
+ struct resource r;
+ void __iomem *pci_reg;
+
+ printk("Found a Xilinx plb-pci host bridge\n");
+
+ if(of_address_to_resource(pci_node, 0, &r))
+ {
+ printk("No address for Xilinx plb-pci host bridge\n");
+ return;
+ }
+
+ hose = pcibios_alloc_controller(pci_node);
+ if (!hose)
+ return;
+
+ hose->first_busno = 0;
+ hose->last_busno = 1; /* there are two slots behind a TI2250 pci-to-pci bridge */
+
+ /* Setup config space */
+ setup_indirect_pci(hose, r.start + XPLB_PCI_ADDR, r.start + XPLB_PCI_DATA, 0);
+
+ /* According to the xilinx plbv46_pci documentation the soft-core starts a self-init when the bus master enable bit is set.
+ * Without this bit set the pci bus can't be scanned. */
+ early_write_config_word(hose, 0, 0, PCI_COMMAND, PCI_HOST_ENABLE_CMD);
+
+ /* Set the max latency timer to 255 */
+ early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0xff);
+
+ /* Set the max bus number to 255 */
+ pci_reg = of_iomap(pci_node, 0);
+ out_8(pci_reg + XPLB_PCI_BUS, 0xff);
+ iounmap(pci_reg);
+
+ /* Register the host bridge with the linux kernel! */
+ pci_process_bridge_OF_ranges(hose, pci_node, 1 /* primary=yes */);
+ }
+}
diff -urN -X linux-2.6.29/Documentation/dontdiff linux-2.6.29/drivers/ide/alim15x3.c ml510-dev/linux-2.6.29/drivers/ide/alim15x3.c
--- linux-2.6.29/drivers/ide/alim15x3.c 2009-03-24 00:12:14.000000000 +0100
+++ ml510-dev/linux-2.6.29/drivers/ide/alim15x3.c 2009-03-27 14:47:50.000000000 +0100
@@ -401,7 +401,8 @@
return cbl;
}
-#if !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC)
+#if !defined(CONFIG_SPARC64)
+// && !defined(CONFIG_PPC)
/**
* init_hwif_ali15x3 - Initialize the ALI IDE x86 stuff
* @hwif: interface to configure
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
