cbe_cpufreq has a partial dependency on cbe_cpufreq_pmi, which cannot
be easily expressed in Kconfig. This fixes it by introducing an
extra Kconfig symbol CBE_CPUFREQ_PMI_ENABLE. To make the dependency
clearer, turn PPC_PMI into an automatic symbol.
Reported-by: Michael Neuling <mi...@neuling.org>
Signed-off-by: Arnd Bergmann <a...@arndb.de>
---
This is the best I could come up with.
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -91,15 +91,6 @@ config RTAS_FLASH
tristate "Firmware flash interface"
depends on PPC64 && RTAS_PROC
-config PPC_PMI
- tristate "Support for PMI"
- depends on PPC_IBM_CELL_BLADE
- help
- PMI (Platform Management Interrupt) is a way to
- communicate with the BMC (Baseboard Management Controller).
- It is used in some IBM Cell blades.
- default m
-
config MMIO_NVRAM
bool
default n
diff --git a/arch/powerpc/platforms/cell/Kconfig
b/arch/powerpc/platforms/cell/Kconfig
index 5cc3279..037f59a 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -98,7 +98,7 @@ config PPC_IBM_CELL_RESETBUTTON
config PPC_IBM_CELL_POWERBUTTON
tristate "IBM Cell Blade power button"
- depends on PPC_IBM_CELL_BLADE && PPC_PMI && INPUT_EVDEV
+ depends on PPC_IBM_CELL_BLADE && INPUT_EVDEV
default y
help
Support Powerbutton on IBM Cell blades.
@@ -118,9 +118,9 @@ config CBE_CPUFREQ
For details, take a look at <file:Documentation/cpu-freq/>.
If you don't have such processor, say N
-config CBE_CPUFREQ_PMI
- tristate "CBE frequency scaling using PMI interface"
- depends on CBE_CPUFREQ && PPC_PMI && EXPERIMENTAL
+config CBE_CPUFREQ_PMI_ENABLE
+ bool "CBE frequency scaling using PMI interface"
+ depends on CBE_CPUFREQ && EXPERIMENTAL
default n
help
Select this, if you want to use the PMI interface
@@ -128,6 +128,20 @@ config CBE_CPUFREQ_PMI
processor will not only be able to run at lower speed,
but also at lower core voltage.
+config CBE_CPUFREQ_PMI
+ tristate
+ depends on CBE_CPUFREQ_PMI_ENABLE
+ default CBE_CPUFREQ
+
+config PPC_PMI
+ tristate
+ default y
+ depends on CBE_CPUFREQ_PMI || PPC_IBM_CELL_POWERBUTTON
+ help
+ PMI (Platform Management Interrupt) is a way to
+ communicate with the BMC (Baseboard Management Controller).
+ It is used in some IBM Cell blades.
+
config CBE_CPUFREQ_SPU_GOVERNOR
tristate "CBE frequency scaling based on SPU usage"
depends on SPU_FS && CPU_FREQ
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
