Hi all, I'm working on porting of a Linux Kernel ( Linux-2.6.27-rc5) on an MPC7448 & Marvell 64460 based PowerPC system. At kernel booting, messages seems as usually on the serial output. Nevertheless at loading of the system trough NFS, appears only printk messages from the kernel. By trying to connect with the system via Telnet, returns following error „telnetd: getpty: No such file or directory“. Node files in „/dev“ are existing and the same system works just fine with an older Kernel (2.6.12).
The kernel is started with follows parameters (DTS-file): bootargs = "console=/dev/ttyS0,115200 root=/dev/nfs nfsroot=192.168.101.87:/mnt/share/uroot ip=192.168.102.115:192.168.101.87:192.168.100.1:255.255.252.0:board5:eth0:off"; linux,stdout-path = "/system-control...@fbe00000/ser...@12000"; May be somebody can give to me some tips, where can be my eventual problem, or where I have search for errors! If it is necessary, I can post more information. Thank you in advance Best regards, Eduard Fuchs -- Eduard Fuchs Telefon: +49 (561) 804-6596 Universität Kassel Fax: +49 (561) 804-6588 Wilhelmshöher Allee 71 E-Mail: edfu...@uni-kassel.de 34121 Kassel WWW: http://www.rs.eecs.uni-kassel.de Raum 1125:1127 FG Rechnerarchitektur und Systemprogrammierung _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
