On Jan 15, 2009, at 9:05 AM, wael showair wrote:
hi All,
i have LTIB version 6.2.2 with which i have built linux kernel
2.6.19-rc5
for my board where its processor is MPC8555.i built the kernel Image
successfuly without any problems
But Now i want to upgrade the linux kernel to 2.6.27 but
unfortunately i got
the following error:
************************************************************************
Using /home/test/ltib-6.2.2-sv/rpm/BUILD/linux-2.6.27 as source for
kernel
GEN /home/test/ltib-6.2.2-sv/rpm/BUILD/kbuild/mpc8555amc/Makefile
CHK include/linux/version.h
CHK include/linux/utsrelease.h
CALL
/home/test/ltib-6.2.2-sv/rpm/BUILD/linux-2.6.27/scripts/
checksyscalls.sh
CHK include/linux/compile.h
CALL
/home/test/ltib-6.2.2-sv/rpm/BUILD/linux-2.6.27/arch/powerpc/kernel/
systbl_chk.sh
CC arch/powerpc/kernel/prom_init.o
CALL
/home/test/ltib-6.2.2-sv/rpm/BUILD/linux-2.6.27/arch/powerpc/kernel/
prom_init_check.sh
BOOTCC arch/powerpc/boot/4xx.o
Assembler messages:
Error: Internal assembler error for instruction icbt
Internal error, aborting at
/usr/src/RPM/BUILD/crosstool/source/binutils-2.15/gas/config/tc-
ppc.c line
1300 in ppc_setup_opcodes
Please report this bug.
make[2]: *** [arch/powerpc/boot/4xx.o] Error 2
make[1]: *** [zImage] Error 2
make: *** [sub-make] Error 2
error: Bad exit status from /home/test/ltib-6.2.2-sv/tmp/rpm-tmp.81042
(%build)
RPM build errors:
Bad exit status from /home/test/ltib-6.2.2-sv/tmp/rpm-tmp.81042
(%build)
Failed building kernel-2.6.27-mpc8555amc
************************************************************************
i think that i have to upgrade the cross toolchain that i m using,
actually
it is version 3.4.3?
is there a certain version of toolchain that i have to use to build
linux
kernel 2.6.27?
My last question is how can i upgrade the toolchain i m using?
Newer ltib versions have newer toolchains (like gcc 4.2.x)
- k
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
