nanda wrote:
Hi Stuart,
Thanks for the information. gpp access was resolved.
I was successful in building the linux 2.6.11 using the ltib and able
to bring up the MPC8360 EMDS.
But, I still face the problem for linux kernel 2.6.19 and 2.6.20. When
I tried using ltib in the bringing up the board.
The MPC 8360 board keeps rebooting after downloading the image Power
PC Kernel Image(uImage) and Power PC RAMDisk
Image(rootfs.ext2.gz.uboot) build by the "ltib"
Please clarrify on the same.
I'm not a kernel expert and don't know what failure you
are seeing here, but I might observe that 2.6.19 and .20
are two years old, and 2.6.11 is more than 3 years old.
If you think we, collectively, haven't improved things in
that time period, please, complain about 2.6.11, .19, and .20.
If on the off chance you think things *might* have gotten
better due to a *bit* of development effort over the past
three years, you might try installing a modern U-Boot and
a modern Kernel.
Thanks,
jdl
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
