Hi Nanda, You'll need to get help from the kernel experts with this issue.
Regards, Stuart On Fri, 2008-11-21 at 14:16 +0000, nanda wrote: > Hi Stuart, > Thanks for the information. gpp access was resolved. > I was successful in building the linux 2.6.11 using the ltib and > able to bring up the MPC8360 EMDS. > But, I still face the problem for linux kernel 2.6.19 and > 2.6.20. When I tried using ltib in the bringing up the board. > The MPC 8360 board keeps rebooting after downloading the image Power > PC Kernel Image(uImage) and Power PC RAMDisk > Image(rootfs.ext2.gz.uboot) build by the "ltib" > Please clarrify on the same. > > Thanks in advance. > > Regards, > Nanda > > > > > On Thu, 20 Nov 2008 18:40:36 0000 Stuart Hughes wrote > Hi Nanda, > > This is happening because you don't have access to > http://www.bitshrine.org/gpp for some reason. > > If LTIB needs to download sources to build a package, it will get them > from bitshrine.org. Can you check that you are able to access this URL > from the command line with wget. > > Regards, Stuart > > On Thu, 2008-11-20 at 18:30 0000, nanda wrote: > > Hi All, > > Iam forwarding the mail which I have posted to powerpc linux list > > Linuxppc-dev@ozlabs.org > > =================================================== > > > > Iam getting the below error during the generation of > > rootfs.ext2.gz.uboot (Power PC Linux RAM Disk Image) and uImage > (Power > > PC Linux Kernel Image) for linux-2.6.20.6 kernel on the power PC MPC > > 8360E MDS using ltib tool. > > > > "Testing ppp_url connectivity: FAIL, disabling > > > > Testing gpp_url connectivity: FAIL, disabling > > > > No network download connection available" > > > > I did the following steps, but Iam unable to generate the > > rootfs.ext2.gz.uboot > > > > - In the ltib directory > > > > ./ltib --configure > > > > In the configure menu, I specified the following, before saving the > > configs > > > > - Tool chain as (gcc-3.4.3/glibc-2.3.3) > > > > - uboot 1.1.3 > > > > - "Kernel (local linux directory build)" which refers to the local > > directory where linux-2.6.20.6 is placed > > > > - "Kernel config file"specified as mpc8360emds_defconfig, which is > the > > file copied > > > from /home/nanda/linux2.6.20.6/arch/powerpc/configs/mpc8360emds_defconfig to > the ltib/config/platform/mpc8360epb directory) > > > > - Linux Target Architecture as "powerpc" > > > > After the above process by saving the configuration (it started > > building kernel and generated uImage) and failed in the below place > > (Refer also the attached build.txt file) > > > > ================================ > > > > Processing: skell > > > > =================== > > > > Testing ppp_url connectivity: FAIL, disabling > > > > Testing gpp_url connectivity: FAIL, disabling > > > > No network download connection available > > > > Started: Thu Nov 20 14:44:45 2008 > > > > Ended: Thu Nov 20 14:57:32 2008 > > > > Elapsed: 767 seconds > > > > Build Failed > > > > ===================================== > > > > I have attached the below files for boot and build logs with this > > mail, > > > > 1) defconfig.dev - default config generated for "./ltib configure" > > from config/platform/mpc8360epb > > > > 2) build.txt - Error build during "./ltib configure" output > > > > 3) mpc8360emds_defconfig - Default config file > > from /home/nanda/linux2.6.20.6/arch/powerpc/configs/ > > > > The end result was I could only see the uImage generated without > > rootfs.ext2.gz.uboot. Please clarify on the same > > > > Thanks in advance, > > > > Regards, > > > > Nanda > > > > > _______________________________________________ > Linuxppc-dev mailing list > Linuxppc-dev@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-dev > > > Rediff Shopping _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
