On Fri, Jul 18, 2025 at 12:28:44PM +0200, Niklas Cassel wrote:
> On Tue, Jul 15, 2025 at 07:51:03PM +0530, Manivannan Sadhasivam via B4 Relay 
> wrote:
> 2) Testing link down reset:
> 
> selftests before link down reset:
> # FAILED: 14 / 16 tests passed.
> 
> ## On EP side:
> # echo 0 > /sys/kernel/config/pci_ep/controllers/a40000000.pcie-ep/start && \
>   sleep 0.1 && echo 1 > 
> /sys/kernel/config/pci_ep/controllers/a40000000.pcie-ep/start
> 
> 
> [  111.137162] rockchip-dw-pcie a40000000.pcie: PCIE_CLIENT_INTR_STATUS_MISC: 
> 0x4
> [  111.137881] rockchip-dw-pcie a40000000.pcie: LTSSM_STATUS: 0x0
> [  111.138432] rockchip-dw-pcie a40000000.pcie: hot reset or link-down reset
> [  111.139067] pcieport 0000:00:00.0: Recovering Root Port due to Link Down
> [  111.139686] pci-endpoint-test 0000:01:00.0: AER: can't recover (no 
> error_detected callback)
> [  111.255407] rockchip-dw-pcie a40000000.pcie: PCIe Gen.3 x4 link up
> [  111.256019] rockchip-dw-pcie a40000000.pcie: Root Port reset completed
> [  111.383401] pcieport 0000:00:00.0: Root Port has been reset
> [  111.384060] pcieport 0000:00:00.0: AER: device recovery failed
> [  111.384582] rockchip-dw-pcie a40000000.pcie: PCIE_CLIENT_INTR_STATUS_MISC: 
> 0x3
> [  111.385218] rockchip-dw-pcie a40000000.pcie: LTSSM_STATUS: 0x230011
> [  111.385771] rockchip-dw-pcie a40000000.pcie: Received Link up event. 
> Starting enumeration!
> [  111.390866] pcieport 0000:00:00.0: bridge configuration invalid ([bus 
> 00-00]), reconfiguring
> [  111.391650] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
> 
> Basically all tests timeout
> # FAILED: 1 / 16 tests passed.
> 
> Which is the same as before this patch series.

The above was with CONFIG_PCIEAER=y

Wilfred suggested that I tried without this config set.

However, doing so, I got the exact same result:
# FAILED: 1 / 16 tests passed.


For the record, the test that passes is not actually passing either,
it is the BAR4 test, which is skipped, since BAR4 is reserved on rock5b:
ok 5 pci_ep_bar.BAR4.BAR_TEST # SKIP BAR is disabled


Kind regards,
Niklas

Reply via email to