On Wed Jan 29, 2025 at 8:52 AM AEST, Paul Mackerras wrote:
> Microwatt now implements ISA v3.1 (SFFS compliancy subset), including
> prefixed instructions, scv/rfscv, and the FSCR, HFSCR, TAR, and CTRL
> registers. The privileged mode of operation is now hypervisor mode
> and there is no privileged non-hypervisor mode; the MSR[HV] bit is
> forced to 1.
Cool. Lots of development in microwatt.
Come to think of it we should have put a broadcast-tlbie feature
in there and you wouldn't need the other patch. That can go on
the todo list I guess.
system-call-vectored was available in ISA v3.0. Not that we do much
with it at the moment IIRC, but there were dreams of wiring it in for
compat guests. With that fixed,
Acked-by: Nicholas Piggin <npig...@gmail.com>
Thanks,
Nick
>
> Besides updating the ibm,powerpc-cpu-features property to reflect the
> above, this also makes the following changes relating to peripheral
> devices:
>
> - Add gpio controller.
> - Remove high-speed property from SD controller, for the case where
> the interface is connected through 200 ohm protection resisters.
> - Put an alias for the ethernet in /chosen.
>
> Signed-off-by: Paul Mackerras <pau...@ozlabs.org>
> ---
> arch/powerpc/boot/dts/microwatt.dts | 73 ++++++++++++++++++++++++-----
> 1 file changed, 62 insertions(+), 11 deletions(-)
>
> diff --git a/arch/powerpc/boot/dts/microwatt.dts
> b/arch/powerpc/boot/dts/microwatt.dts
> index 269e930b3b0b..6e575e841a7b 100644
> --- a/arch/powerpc/boot/dts/microwatt.dts
> +++ b/arch/powerpc/boot/dts/microwatt.dts
> @@ -1,4 +1,5 @@
> /dts-v1/;
> +#include <dt-bindings/gpio/gpio.h>
>
> / {
> #size-cells = <0x02>;
> @@ -8,6 +9,7 @@ / {
>
> aliases {
> serial0 = &UART0;
> + ethernet = &enet0;
> };
>
> reserved-memory {
> @@ -35,40 +37,79 @@ cpus {
>
> ibm,powerpc-cpu-features {
> display-name = "Microwatt";
> - isa = <3000>;
> + isa = <3010>;
> device_type = "cpu-features";
> compatible = "ibm,powerpc-cpu-features";
>
> mmu-radix {
> isa = <3000>;
> - usable-privilege = <2>;
> + usable-privilege = <6>;
> + os-support = <0>;
> };
>
> little-endian {
> - isa = <2050>;
> - usable-privilege = <3>;
> + isa = <0>;
> + usable-privilege = <7>;
> + os-support = <0>;
> hwcap-bit-nr = <1>;
> };
>
> cache-inhibited-large-page {
> - isa = <2040>;
> - usable-privilege = <2>;
> + isa = <0>;
> + usable-privilege = <6>;
> + os-support = <0>;
> };
>
> fixed-point-v3 {
> isa = <3000>;
> - usable-privilege = <3>;
> + usable-privilege = <7>;
> };
>
> no-execute {
> - isa = <2010>;
> + isa = <0x00>;
> usable-privilege = <2>;
> + os-support = <0>;
> };
>
> floating-point {
> + hfscr-bit-nr = <0>;
> hwcap-bit-nr = <27>;
> isa = <0>;
> - usable-privilege = <3>;
> + usable-privilege = <7>;
> + hv-support = <1>;
> + os-support = <0>;
> + };
> +
> + prefixed-instructions {
> + hfscr-bit-nr = <13>;
> + fscr-bit-nr = <13>;
> + isa = <3010>;
> + usable-privilege = <7>;
> + os-support = <1>;
> + hv-support = <1>;
> + };
> +
> + tar {
> + hfscr-bit-nr = <8>;
> + fscr-bit-nr = <8>;
> + isa = <2070>;
> + usable-privilege = <7>;
> + os-support = <1>;
> + hv-support = <1>;
> + hwcap-bit-nr = <58>;
> + };
> +
> + control-register {
> + isa = <0>;
> + usable-privilege = <7>;
> + };
> +
> + system-call-vectored {
> + isa = <2070>;
> + usable-privilege = <7>;
> + os-support = <1>;
> + fscr-bit-nr = <12>;
> + hwcap-bit-nr = <52>;
> };
> };
>
> @@ -138,7 +179,18 @@ UART0: serial@2000 {
> interrupts = <0x10 0x1>;
> };
>
> - ethernet@8020000 {
> + gpio: gpio@7000 {
> + device_type = "gpio";
> + compatible = "faraday,ftgpio010";
> + gpio-controller;
> + #gpio-cells = <2>;
> + reg = <0x7000 0x80>;
> + interrupts = <0x14 1>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + enet0: ethernet@8020000 {
> compatible = "litex,liteeth";
> reg = <0x8021000 0x100
> 0x8020800 0x100
> @@ -160,7 +212,6 @@ mmc@8040000 {
> reg-names = "phy", "core", "reader", "writer", "irq";
> bus-width = <4>;
> interrupts = <0x13 1>;
> - cap-sd-highspeed;
> clocks = <&sys_clk>;
> };
> };
