From: "J. Neuschäfer" <j...@posteo.net>
This increases readability, because "0x8" isn't very descriptive.
mpc8315erdb.dtb remains identical after this patch.
Signed-off-by: J. Neuschäfer <j...@posteo.net>
---
arch/powerpc/boot/dts/mpc8315e.dtsi | 112 ++++++++++++++++++----------------
arch/powerpc/boot/dts/mpc8315erdb.dts | 4 +-
2 files changed, 62 insertions(+), 54 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc8315e.dtsi
b/arch/powerpc/boot/dts/mpc8315e.dtsi
index
4830c8e5cd5c6858ea3a0c25e4a1f26fa87a7111..8741482905f0f30bf893a08b2602fdc6e74c23ff
100644
--- a/arch/powerpc/boot/dts/mpc8315e.dtsi
+++ b/arch/powerpc/boot/dts/mpc8315e.dtsi
@@ -12,6 +12,7 @@
*/
/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
compatible = "fsl,mpc8315e";
@@ -48,7 +49,7 @@ localbus@e0005000 {
#size-cells = <1>;
compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
reg = <0xe0005000 0x1000>;
- interrupts = <77 0x8>;
+ interrupts = <77 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&ipic>;
};
@@ -73,7 +74,7 @@ i2c@3000 {
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
- interrupts = <14 0x8>;
+ interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&ipic>;
dfsrr;
};
@@ -82,7 +83,7 @@ spi@7000 {
cell-index = <0>;
compatible = "fsl,spi";
reg = <0x7000 0x1000>;
- interrupts = <16 0x8>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&ipic>;
mode = "cpu";
};
@@ -94,35 +95,35 @@ dma@82a8 {
reg = <0x82a8 4>;
ranges = <0 0x8100 0x1a8>;
interrupt-parent = <&ipic>;
- interrupts = <71 8>;
+ interrupts = <71 IRQ_TYPE_LEVEL_LOW>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,mpc8315-dma-channel",
"fsl,elo-dma-channel";
reg = <0 0x80>;
cell-index = <0>;
interrupt-parent = <&ipic>;
- interrupts = <71 8>;
+ interrupts = <71 IRQ_TYPE_LEVEL_LOW>;
};
dma-channel@80 {
compatible = "fsl,mpc8315-dma-channel",
"fsl,elo-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupt-parent = <&ipic>;
- interrupts = <71 8>;
+ interrupts = <71 IRQ_TYPE_LEVEL_LOW>;
};
dma-channel@100 {
compatible = "fsl,mpc8315-dma-channel",
"fsl,elo-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
interrupt-parent = <&ipic>;
- interrupts = <71 8>;
+ interrupts = <71 IRQ_TYPE_LEVEL_LOW>;
};
dma-channel@180 {
compatible = "fsl,mpc8315-dma-channel",
"fsl,elo-dma-channel";
reg = <0x180 0x28>;
cell-index = <3>;
interrupt-parent = <&ipic>;
- interrupts = <71 8>;
+ interrupts = <71 IRQ_TYPE_LEVEL_LOW>;
};
};
@@ -132,7 +133,7 @@ usb@23000 {
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <&ipic>;
- interrupts = <38 0x8>;
+ interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
phy_type = "utmi";
};
@@ -146,7 +147,9 @@ enet0: ethernet@24000 {
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <32 0x8 33 0x8 34 0x8>;
+ interrupts = <32 IRQ_TYPE_LEVEL_LOW>,
+ <33 IRQ_TYPE_LEVEL_LOW>,
+ <34 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&ipic>;
mdio@520 {
@@ -167,7 +170,9 @@ enet1: ethernet@25000 {
reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 0x8 36 0x8 37 0x8>;
+ interrupts = <35 IRQ_TYPE_LEVEL_LOW>,
+ <36 IRQ_TYPE_LEVEL_LOW>,
+ <37 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&ipic>;
mdio@520 {
@@ -184,7 +189,7 @@ serial0: serial@4500 {
compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <133333333>;
- interrupts = <9 0x8>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&ipic>;
};
@@ -194,7 +199,7 @@ serial1: serial@4600 {
compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <133333333>;
- interrupts = <10 0x8>;
+ interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&ipic>;
};
@@ -203,7 +208,7 @@ crypto@30000 {
"fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
"fsl,sec2.0";
reg = <0x30000 0x10000>;
- interrupts = <11 0x8>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&ipic>;
fsl,num-channels = <4>;
fsl,channel-fifo-len = <24>;
@@ -215,7 +220,7 @@ sata@18000 {
compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
reg = <0x18000 0x1000>;
cell-index = <1>;
- interrupts = <44 0x8>;
+ interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&ipic>;
};
@@ -223,14 +228,17 @@ sata@19000 {
compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
reg = <0x19000 0x1000>;
cell-index = <2>;
- interrupts = <45 0x8>;
+ interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&ipic>;
};
gtm1: timer@500 {
compatible = "fsl,mpc8315-gtm", "fsl,gtm";
reg = <0x500 0x100>;
- interrupts = <90 8 78 8 84 8 72 8>;
+ interrupts = <90 IRQ_TYPE_LEVEL_LOW>,
+ <78 IRQ_TYPE_LEVEL_LOW>,
+ <84 IRQ_TYPE_LEVEL_LOW>,
+ <72 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&ipic>;
clock-frequency = <133333333>;
};
@@ -238,16 +246,16 @@ gtm1: timer@500 {
timer@600 {
compatible = "fsl,mpc8315-gtm", "fsl,gtm";
reg = <0x600 0x100>;
- interrupts = <91 8 79 8 85 8 73 8>;
+ interrupts = <91 IRQ_TYPE_LEVEL_LOW>,
+ <79 IRQ_TYPE_LEVEL_LOW>,
+ <85 IRQ_TYPE_LEVEL_LOW>,
+ <73 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&ipic>;
clock-frequency = <133333333>;
};
/* IPIC
- * interrupts cell = <intr #, sense>
- * sense values match linux IORESOURCE_IRQ_* defines:
- * sense == 8: Level, low assertion
- * sense == 2: Edge, high-to-low change
+ * interrupts cell = <intr #, type>
*/
ipic: interrupt-controller@700 {
interrupt-controller;
@@ -261,14 +269,14 @@ ipic-msi@7c0 {
compatible = "fsl,ipic-msi";
reg = <0x7c0 0x40>;
msi-available-ranges = <0 0x100>;
- interrupts = <0x43 0x8
- 0x4 0x8
- 0x51 0x8
- 0x52 0x8
- 0x56 0x8
- 0x57 0x8
- 0x58 0x8
- 0x59 0x8>;
+ interrupts = <0x43 IRQ_TYPE_LEVEL_LOW>,
+ <0x4 IRQ_TYPE_LEVEL_LOW>,
+ <0x51 IRQ_TYPE_LEVEL_LOW>,
+ <0x52 IRQ_TYPE_LEVEL_LOW>,
+ <0x56 IRQ_TYPE_LEVEL_LOW>,
+ <0x57 IRQ_TYPE_LEVEL_LOW>,
+ <0x58 IRQ_TYPE_LEVEL_LOW>,
+ <0x59 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = < &ipic >;
};
@@ -276,7 +284,7 @@ pmc: power@b00 {
compatible = "fsl,mpc8315-pmc", "fsl,mpc8313-pmc",
"fsl,mpc8349-pmc";
reg = <0xb00 0x100 0xa00 0x100>;
- interrupts = <80 8>;
+ interrupts = <80 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&ipic>;
fsl,mpc8313-wakeup-timer = <>m1>;
};
@@ -286,24 +294,24 @@ pci0: pci@e0008500 {
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0E -mini PCI */
- 0x7000 0x0 0x0 0x1 &ipic 18 0x8
- 0x7000 0x0 0x0 0x2 &ipic 18 0x8
- 0x7000 0x0 0x0 0x3 &ipic 18 0x8
- 0x7000 0x0 0x0 0x4 &ipic 18 0x8
+ 0x7000 0x0 0x0 0x1 &ipic 18 IRQ_TYPE_LEVEL_LOW
+ 0x7000 0x0 0x0 0x2 &ipic 18 IRQ_TYPE_LEVEL_LOW
+ 0x7000 0x0 0x0 0x3 &ipic 18 IRQ_TYPE_LEVEL_LOW
+ 0x7000 0x0 0x0 0x4 &ipic 18 IRQ_TYPE_LEVEL_LOW
/* IDSEL 0x0F -mini PCI */
- 0x7800 0x0 0x0 0x1 &ipic 17 0x8
- 0x7800 0x0 0x0 0x2 &ipic 17 0x8
- 0x7800 0x0 0x0 0x3 &ipic 17 0x8
- 0x7800 0x0 0x0 0x4 &ipic 17 0x8
+ 0x7800 0x0 0x0 0x1 &ipic 17 IRQ_TYPE_LEVEL_LOW
+ 0x7800 0x0 0x0 0x2 &ipic 17 IRQ_TYPE_LEVEL_LOW
+ 0x7800 0x0 0x0 0x3 &ipic 17 IRQ_TYPE_LEVEL_LOW
+ 0x7800 0x0 0x0 0x4 &ipic 17 IRQ_TYPE_LEVEL_LOW
/* IDSEL 0x10 - PCI slot */
- 0x8000 0x0 0x0 0x1 &ipic 48 0x8
- 0x8000 0x0 0x0 0x2 &ipic 17 0x8
- 0x8000 0x0 0x0 0x3 &ipic 48 0x8
- 0x8000 0x0 0x0 0x4 &ipic 17 0x8>;
+ 0x8000 0x0 0x0 0x1 &ipic 48 IRQ_TYPE_LEVEL_LOW
+ 0x8000 0x0 0x0 0x2 &ipic 17 IRQ_TYPE_LEVEL_LOW
+ 0x8000 0x0 0x0 0x3 &ipic 48 IRQ_TYPE_LEVEL_LOW
+ 0x8000 0x0 0x0 0x4 &ipic 17
IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&ipic>;
- interrupts = <66 0x8>;
+ interrupts = <66 IRQ_TYPE_LEVEL_LOW>;
bus-range = <0x0 0x0>;
ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
0x42000000 0 0x80000000 0x80000000 0 0x10000000
@@ -329,10 +337,10 @@ pci1: pcie@e0009000 {
0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
bus-range = <0 255>;
interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <0 0 0 1 &ipic 1 8
- 0 0 0 2 &ipic 1 8
- 0 0 0 3 &ipic 1 8
- 0 0 0 4 &ipic 1 8>;
+ interrupt-map = <0 0 0 1 &ipic 1 IRQ_TYPE_LEVEL_LOW
+ 0 0 0 2 &ipic 1 IRQ_TYPE_LEVEL_LOW
+ 0 0 0 3 &ipic 1 IRQ_TYPE_LEVEL_LOW
+ 0 0 0 4 &ipic 1 IRQ_TYPE_LEVEL_LOW>;
clock-frequency = <0>;
};
@@ -347,10 +355,10 @@ pci2: pcie@e000a000 {
0x01000000 0 0x00000000 0xd1000000 0 0x00800000>;
bus-range = <0 255>;
interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <0 0 0 1 &ipic 2 8
- 0 0 0 2 &ipic 2 8
- 0 0 0 3 &ipic 2 8
- 0 0 0 4 &ipic 2 8>;
+ interrupt-map = <0 0 0 1 &ipic 2 IRQ_TYPE_LEVEL_LOW
+ 0 0 0 2 &ipic 2 IRQ_TYPE_LEVEL_LOW
+ 0 0 0 3 &ipic 2 IRQ_TYPE_LEVEL_LOW
+ 0 0 0 4 &ipic 2 IRQ_TYPE_LEVEL_LOW>;
clock-frequency = <0>;
};
};
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts
b/arch/powerpc/boot/dts/mpc8315erdb.dts
index
b39903c8813d194c104d1e22c6167d8a9cea0076..2ea71514900131893a70b44bab7bcc0bf4d86e44
100644
--- a/arch/powerpc/boot/dts/mpc8315erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -87,13 +87,13 @@ ethernet@24000 {
mdio@520 {
phy0: ethernet-phy@0 {
interrupt-parent = <&ipic>;
- interrupts = <20 0x8>;
+ interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupt-parent = <&ipic>;
- interrupts = <19 0x8>;
+ interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
reg = <0x1>;
};
--
2.45.2
