From: "J. Neuschäfer" <j...@posteo.net>
To make it easier to add other devices based on the MPC831{4,5}{,E}, put
the common parts into a dtsi file.
mpc8315erdb.dtb remains identical after this patch.
Signed-off-by: J. Neuschäfer <j...@posteo.net>
---
Checkpatch (rightfully) complains about a lot of compatible strings that
were never documented in the bindings. Now sure what to do about them.
---
arch/powerpc/boot/dts/mpc8315e.dtsi | 356 ++++++++++++++++++++++++++++++++++
arch/powerpc/boot/dts/mpc8315erdb.dts | 320 +-----------------------------
2 files changed, 361 insertions(+), 315 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc8315e.dtsi
b/arch/powerpc/boot/dts/mpc8315e.dtsi
new file mode 100644
index
0000000000000000000000000000000000000000..4830c8e5cd5c6858ea3a0c25e4a1f26fa87a7111
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8315e.dtsi
@@ -0,0 +1,356 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPC8315E family device tree. This file supports the following chips:
+ *
+ * MPC8314: Without SATA controllers, without security engine
+ * MPC8314E: Without SATA controllers, with security engine
+ * MPC8315: With SATA controllers, without security engine
+ * MPC8315E: With SATA controllers, with security engine
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ * Copyright 2024 J. Neuschäfer
+ */
+
+/dts-v1/;
+
+/ {
+ compatible = "fsl,mpc8315e";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8315@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <16384>;
+ i-cache-size = <16384>;
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0>;
+ };
+
+ localbus@e0005000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
+ reg = <0xe0005000 0x1000>;
+ interrupts = <77 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
+ immr@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8315-immr", "simple-bus";
+ ranges = <0 0xe0000000 0x00100000>;
+ reg = <0xe0000000 0x00000200>;
+ bus-frequency = <0>;
+
+ wdt@200 {
+ device_type = "watchdog";
+ compatible = "mpc83xx_wdt";
+ reg = <0x200 0x100>;
+ };
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <14 0x8>;
+ interrupt-parent = <&ipic>;
+ dfsrr;
+ };
+
+ spi@7000 {
+ cell-index = <0>;
+ compatible = "fsl,spi";
+ reg = <0x7000 0x1000>;
+ interrupts = <16 0x8>;
+ interrupt-parent = <&ipic>;
+ mode = "cpu";
+ };
+
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8315-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8315-dma-channel",
"fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8315-dma-channel",
"fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8315-dma-channel",
"fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8315-dma-channel",
"fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ cell-index = <3>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
+ usb@23000 {
+ compatible = "fsl-usb2-dr";
+ reg = <0x23000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&ipic>;
+ interrupts = <38 0x8>;
+ phy_type = "utmi";
+ };
+
+ enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <32 0x8 33 0x8 34 0x8>;
+ interrupt-parent = <&ipic>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+ };
+ };
+
+ enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <35 0x8 36 0x8 37 0x8>;
+ interrupt-parent = <&ipic>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+ };
+ };
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "fsl,ns16550", "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <133333333>;
+ interrupts = <9 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "fsl,ns16550", "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <133333333>;
+ interrupts = <10 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
+ crypto@30000 {
+ compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
+ "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+ "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <11 0x8>;
+ interrupt-parent = <&ipic>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x97c>;
+ fsl,descriptor-types-mask = <0x3a30abf>;
+ };
+
+ sata@18000 {
+ compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
+ reg = <0x18000 0x1000>;
+ cell-index = <1>;
+ interrupts = <44 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
+ sata@19000 {
+ compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
+ reg = <0x19000 0x1000>;
+ cell-index = <2>;
+ interrupts = <45 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
+ gtm1: timer@500 {
+ compatible = "fsl,mpc8315-gtm", "fsl,gtm";
+ reg = <0x500 0x100>;
+ interrupts = <90 8 78 8 84 8 72 8>;
+ interrupt-parent = <&ipic>;
+ clock-frequency = <133333333>;
+ };
+
+ timer@600 {
+ compatible = "fsl,mpc8315-gtm", "fsl,gtm";
+ reg = <0x600 0x100>;
+ interrupts = <91 8 79 8 85 8 73 8>;
+ interrupt-parent = <&ipic>;
+ clock-frequency = <133333333>;
+ };
+
+ /* IPIC
+ * interrupts cell = <intr #, sense>
+ * sense values match linux IORESOURCE_IRQ_* defines:
+ * sense == 8: Level, low assertion
+ * sense == 2: Edge, high-to-low change
+ */
+ ipic: interrupt-controller@700 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x700 0x100>;
+ device_type = "ipic";
+ };
+
+ ipic-msi@7c0 {
+ compatible = "fsl,ipic-msi";
+ reg = <0x7c0 0x40>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <0x43 0x8
+ 0x4 0x8
+ 0x51 0x8
+ 0x52 0x8
+ 0x56 0x8
+ 0x57 0x8
+ 0x58 0x8
+ 0x59 0x8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ pmc: power@b00 {
+ compatible = "fsl,mpc8315-pmc", "fsl,mpc8313-pmc",
+ "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 8>;
+ interrupt-parent = <&ipic>;
+ fsl,mpc8313-wakeup-timer = <>m1>;
+ };
+ };
+
+ pci0: pci@e0008500 {
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x0E -mini PCI */
+ 0x7000 0x0 0x0 0x1 &ipic 18 0x8
+ 0x7000 0x0 0x0 0x2 &ipic 18 0x8
+ 0x7000 0x0 0x0 0x3 &ipic 18 0x8
+ 0x7000 0x0 0x0 0x4 &ipic 18 0x8
+
+ /* IDSEL 0x0F -mini PCI */
+ 0x7800 0x0 0x0 0x1 &ipic 17 0x8
+ 0x7800 0x0 0x0 0x2 &ipic 17 0x8
+ 0x7800 0x0 0x0 0x3 &ipic 17 0x8
+ 0x7800 0x0 0x0 0x4 &ipic 17 0x8
+
+ /* IDSEL 0x10 - PCI slot */
+ 0x8000 0x0 0x0 0x1 &ipic 48 0x8
+ 0x8000 0x0 0x0 0x2 &ipic 17 0x8
+ 0x8000 0x0 0x0 0x3 &ipic 48 0x8
+ 0x8000 0x0 0x0 0x4 &ipic 17 0x8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <66 0x8>;
+ bus-range = <0x0 0x0>;
+ ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
+ 0x42000000 0 0x80000000 0x80000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xe0300000 0 0x00100000>;
+ clock-frequency = <66666666>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xe0008500 0x100 /* internal registers */
+ 0xe0008300 0x8>; /* config space access
registers */
+ compatible = "fsl,mpc8349-pci";
+ device_type = "pci";
+ };
+
+ pci1: pcie@e0009000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie";
+ reg = <0xe0009000 0x00001000>;
+ ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
+ bus-range = <0 255>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0 0 0 1 &ipic 1 8
+ 0 0 0 2 &ipic 1 8
+ 0 0 0 3 &ipic 1 8
+ 0 0 0 4 &ipic 1 8>;
+ clock-frequency = <0>;
+ };
+
+ pci2: pcie@e000a000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie";
+ reg = <0xe000a000 0x00001000>;
+ ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xd1000000 0 0x00800000>;
+ bus-range = <0 255>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0 0 0 1 &ipic 2 8
+ 0 0 0 2 &ipic 2 8
+ 0 0 0 3 &ipic 2 8
+ 0 0 0 4 &ipic 2 8>;
+ clock-frequency = <0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts
b/arch/powerpc/boot/dts/mpc8315erdb.dts
index
e09b37d7489d01bfd16a26e9786868f630fa0262..b39903c8813d194c104d1e22c6167d8a9cea0076
100644
--- a/arch/powerpc/boot/dts/mpc8315erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -5,12 +5,10 @@
* Copyright 2007 Freescale Semiconductor Inc.
*/
-/dts-v1/;
+#include "mpc8315e.dtsi"
/ {
compatible = "fsl,mpc8315erdb";
- #address-cells = <1>;
- #size-cells = <1>;
aliases {
ethernet0 = &enet0;
@@ -22,36 +20,11 @@ aliases {
pci2 = &pci2;
};
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8315@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>;
- i-cache-line-size = <32>;
- d-cache-size = <16384>;
- i-cache-size = <16384>;
- timebase-frequency = <0>; // from bootloader
- bus-frequency = <0>; // from bootloader
- clock-frequency = <0>; // from bootloader
- };
- };
-
memory {
- device_type = "memory";
reg = <0x00000000 0x08000000>; // 128MB at 0
};
localbus@e0005000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
- reg = <0xe0005000 0x1000>;
- interrupts = <77 0x8>;
- interrupt-parent = <&ipic>;
-
// CS0 and CS1 are swapped when
// booting from nand, but the
// addresses are the same.
@@ -91,29 +64,7 @@ fs@400000 {
};
immr@e0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,mpc8315-immr", "simple-bus";
- ranges = <0 0xe0000000 0x00100000>;
- reg = <0xe0000000 0x00000200>;
- bus-frequency = <0>;
-
- wdt@200 {
- device_type = "watchdog";
- compatible = "mpc83xx_wdt";
- reg = <0x200 0x100>;
- };
-
i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <14 0x8>;
- interrupt-parent = <&ipic>;
- dfsrr;
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
@@ -128,86 +79,12 @@ mcu_pio: mcu@a {
};
};
- spi@7000 {
- cell-index = <0>;
- compatible = "fsl,spi";
- reg = <0x7000 0x1000>;
- interrupts = <16 0x8>;
- interrupt-parent = <&ipic>;
- mode = "cpu";
- };
-
- dma@82a8 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8315-dma", "fsl,elo-dma";
- reg = <0x82a8 4>;
- ranges = <0 0x8100 0x1a8>;
- interrupt-parent = <&ipic>;
- interrupts = <71 8>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8315-dma-channel",
"fsl,elo-dma-channel";
- reg = <0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&ipic>;
- interrupts = <71 8>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8315-dma-channel",
"fsl,elo-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&ipic>;
- interrupts = <71 8>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8315-dma-channel",
"fsl,elo-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&ipic>;
- interrupts = <71 8>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8315-dma-channel",
"fsl,elo-dma-channel";
- reg = <0x180 0x28>;
- cell-index = <3>;
- interrupt-parent = <&ipic>;
- interrupts = <71 8>;
- };
- };
-
- usb@23000 {
- compatible = "fsl-usb2-dr";
- reg = <0x23000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&ipic>;
- interrupts = <38 0x8>;
- phy_type = "utmi";
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <32 0x8 33 0x8 34 0x8>;
- interrupt-parent = <&ipic>;
+ ethernet@24000 {
tbi-handle = <&tbi0>;
phy-handle = < &phy0 >;
fsl,magic-packet;
mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
phy0: ethernet-phy@0 {
interrupt-parent = <&ipic>;
interrupts = <20 0x8>;
@@ -227,192 +104,21 @@ tbi0: tbi-phy@11 {
};
};
- enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 0x8 36 0x8 37 0x8>;
- interrupt-parent = <&ipic>;
+ ethernet@25000 {
tbi-handle = <&tbi1>;
phy-handle = < &phy1 >;
fsl,magic-packet;
mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <133333333>;
- interrupts = <9 0x8>;
- interrupt-parent = <&ipic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <133333333>;
- interrupts = <10 0x8>;
- interrupt-parent = <&ipic>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
- "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
- "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <11 0x8>;
- interrupt-parent = <&ipic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x97c>;
- fsl,descriptor-types-mask = <0x3a30abf>;
- };
-
- sata@18000 {
- compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
- reg = <0x18000 0x1000>;
- cell-index = <1>;
- interrupts = <44 0x8>;
- interrupt-parent = <&ipic>;
- };
-
- sata@19000 {
- compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
- reg = <0x19000 0x1000>;
- cell-index = <2>;
- interrupts = <45 0x8>;
- interrupt-parent = <&ipic>;
- };
-
- gtm1: timer@500 {
- compatible = "fsl,mpc8315-gtm", "fsl,gtm";
- reg = <0x500 0x100>;
- interrupts = <90 8 78 8 84 8 72 8>;
- interrupt-parent = <&ipic>;
- clock-frequency = <133333333>;
- };
-
- timer@600 {
- compatible = "fsl,mpc8315-gtm", "fsl,gtm";
- reg = <0x600 0x100>;
- interrupts = <91 8 79 8 85 8 73 8>;
- interrupt-parent = <&ipic>;
- clock-frequency = <133333333>;
- };
-
- /* IPIC
- * interrupts cell = <intr #, sense>
- * sense values match linux IORESOURCE_IRQ_* defines:
- * sense == 8: Level, low assertion
- * sense == 2: Edge, high-to-low change
- */
- ipic: interrupt-controller@700 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x700 0x100>;
- device_type = "ipic";
- };
-
- ipic-msi@7c0 {
- compatible = "fsl,ipic-msi";
- reg = <0x7c0 0x40>;
- msi-available-ranges = <0 0x100>;
- interrupts = <0x43 0x8
- 0x4 0x8
- 0x51 0x8
- 0x52 0x8
- 0x56 0x8
- 0x57 0x8
- 0x58 0x8
- 0x59 0x8>;
- interrupt-parent = < &ipic >;
- };
-
- pmc: power@b00 {
- compatible = "fsl,mpc8315-pmc", "fsl,mpc8313-pmc",
- "fsl,mpc8349-pmc";
- reg = <0xb00 0x100 0xa00 0x100>;
- interrupts = <80 8>;
- interrupt-parent = <&ipic>;
- fsl,mpc8313-wakeup-timer = <>m1>;
- };
};
- pci0: pci@e0008500 {
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0E -mini PCI */
- 0x7000 0x0 0x0 0x1 &ipic 18 0x8
- 0x7000 0x0 0x0 0x2 &ipic 18 0x8
- 0x7000 0x0 0x0 0x3 &ipic 18 0x8
- 0x7000 0x0 0x0 0x4 &ipic 18 0x8
-
- /* IDSEL 0x0F -mini PCI */
- 0x7800 0x0 0x0 0x1 &ipic 17 0x8
- 0x7800 0x0 0x0 0x2 &ipic 17 0x8
- 0x7800 0x0 0x0 0x3 &ipic 17 0x8
- 0x7800 0x0 0x0 0x4 &ipic 17 0x8
-
- /* IDSEL 0x10 - PCI slot */
- 0x8000 0x0 0x0 0x1 &ipic 48 0x8
- 0x8000 0x0 0x0 0x2 &ipic 17 0x8
- 0x8000 0x0 0x0 0x3 &ipic 48 0x8
- 0x8000 0x0 0x0 0x4 &ipic 17 0x8>;
- interrupt-parent = <&ipic>;
- interrupts = <66 0x8>;
- bus-range = <0x0 0x0>;
- ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
- 0x42000000 0 0x80000000 0x80000000 0 0x10000000
- 0x01000000 0 0x00000000 0xe0300000 0 0x00100000>;
- clock-frequency = <66666666>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0008500 0x100 /* internal registers */
- 0xe0008300 0x8>; /* config space access
registers */
- compatible = "fsl,mpc8349-pci";
- device_type = "pci";
- };
-
- pci1: pcie@e0009000 {
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie";
- reg = <0xe0009000 0x00001000>;
- ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
- 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
- bus-range = <0 255>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <0 0 0 1 &ipic 1 8
- 0 0 0 2 &ipic 1 8
- 0 0 0 3 &ipic 1 8
- 0 0 0 4 &ipic 1 8>;
- clock-frequency = <0>;
-
+ pcie@e0009000 {
pcie@0 {
#address-cells = <3>;
#size-cells = <2>;
@@ -427,23 +133,7 @@ pcie@0 {
};
};
- pci2: pcie@e000a000 {
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie";
- reg = <0xe000a000 0x00001000>;
- ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x10000000
- 0x01000000 0 0x00000000 0xd1000000 0 0x00800000>;
- bus-range = <0 255>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <0 0 0 1 &ipic 2 8
- 0 0 0 2 &ipic 2 8
- 0 0 0 3 &ipic 2 8
- 0 0 0 4 &ipic 2 8>;
- clock-frequency = <0>;
-
+ pcie@e000a000 {
pcie@0 {
#address-cells = <3>;
#size-cells = <2>;
--
2.45.2
