On Thu, May 08, 2008 at 10:47:00PM +1000, Bryan O'Donoghue wrote: > Greetings. > > Attached is a patchset to support the ASP8347E.
Sorry for the late reply... > http://www.analogue-micro.com/ASP8347.html. Due to the fact that the board > shipped with a root filesystem that requires devfs, you have to run a > different rootfs with all current kernels. I've been using the 8xx root fs > from the ELDK via NFS, for this. 8xx has a different cache block size (affecting dcbz, etc); I recommend using a 6xx toolchain. You'll have floating point that way, as well. > + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); > + dt_fixup_mac_addresses(bd.bi_enetaddr); > + dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 16, bd.bi_busfreq); > + timebase on 6xx is busfreq / 4, not busfreq / 16. > + node = finddevice("/soc/cpm/brg"); > + if (node) { > + printf("BRG clock-frequency <- 0x%x (%dMHz)\r\n", > + bd.bi_busfreq, MHZ(bd.bi_busfreq)); > + setprop(node, "clock-frequency", &bd.bi_busfreq, 4); > + } > + > +} This doesn't exist at all on 834x, and is named differently on 832x/836x. -Scott _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
