Hello, all:
I am building a Linux kernel module for PPC405EP.
My developing board is PPChameleonEVB. I am debugging
with BDI2000 and GDB, and my problem is:
In GDB, a section of the codes is disassembled to:
mfmsr r0
ori r0,r0,32768
mtmsr r0
blr
From BDI2000, I have checked that after "ori",
GPR0 contains "0x00029030". This value should be
written into MSR by "mtmsr" to set EE bit of MSR as 1,
but after single step in BDI, "mtmsr" does not work as
hoped. MSR becomes "0x00000030", GPR0 becomes some
weird number, and there is "Step timeout detected".
Meanwhile, the board traps into "Data machine check in
kernel mode". I also have tried "wrteei 1" instead of
the codes above, but failed again. However, those
codes works well in PPC440EP Yosemite board.
405EP>ti
Core number : 0
Core state : debug mode
Debug entry cause : single step
Current PC : 0xc32b1008
Current CR : 0x84000084
Current MSR : 0x00021030
Current LR : 0xc32b46c4
405EP>rd
GPR00: 00029030 c1dd9d60 c1fe7bf0 00000000
GPR04: 00000001 00000000 c32b2c8c 00000000
GPR08: c3068000 c3068000 00000001 c3062000
GPR12: 00000000 10019dd8 c32c0000 c32b0000
GPR16: 00000001 c32b0000 00000002 7ff4f670
GPR20: 00000028 c32b0000 c32b0000 10011000
GPR24: c306a000 00000000 00000000 10012c6c
GPR28: c18e4000 c32c0000 00000000 00000000
CR : 84000084 MSR: 00021030
405EP>ti
Core number : 0
Core state : debug mode
Debug entry cause : JTAG stop request
Current PC : 0xc000490c
Current CR : 0x42000082
Current MSR : 0x00000030
Current LR : 0xc001f1b8
# Step timeout detected
405EP>rd
GPR00: 03929800 c02f3e60 c3066000 000102f1
GPR04: 00005424 00000007 c0146f3c c0260000
GPR08: 00000000 c02d0000 c3062000 00000000
GPR12: 00000000 10019dd8 c32c0000 c32b0000
GPR16: 00000001 c32b0000 00000002 7ff4f670
GPR20: 00000028 c32b0000 c32b0000 10011000
GPR24: c306a000 00000000 00000000 10012c6c
GPR28: c02f0000 00000152 c3066000 c02f0000
CR : 42000082 MSR: 00000030
==========================================
Data machine check in kernel mode.
PLB0: BEAR= 0x03066004 ACR= 0x00000000 BESR=
0x00c00000
PLB0 to OPB: BEAR= 0x04000000 BESR0= 0x00000000 BESR1=
0x00000000
Oops: machine check, sig: 7 [#1]
NIP: 00002AD0 LR: 000005A0 CTR: C000CC58
REGS: c02f3f50 TRAP: 0202 Not tainted
(2.6.19.2-eldk)
MSR: 00021000 <ME> CR: 24000084 XER: 20000000
TASK = c3066000[0] '' THREAD: c02d2000
GPR00: 00029030 C1DD9CA0 C3066000 C1DD9CB0 00000001
00000000 C32B2C8C 00000000
GPR08: C3068000 00000000 00021032 01DD9CA0 030661B0
10019DD8 C32C0000 C32B0000
GPR16: 00000001 C32B0000 00000002 7FF4F670 00000028
C32B0000 C32B0000 10011000
GPR24: C306A000 00000000 00000000 10012C6C C18E4000
C32C0000 00000000 00000000
NIP [00002AD0] 0x2ad0
LR [000005A0] 0x5a0
Call Trace:
Instruction dump:
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX
Kernel panic - not syncing: Attempted to kill the idle
task!
<0>Rebooting in 180 seconds..
Thanks for advice!
Best Regards
Evangelion
June 26th, 2008
___________________________________________________________
雅虎邮箱，您的终生邮箱！
http://cn.mail.yahoo.com/
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
