Ron Madrid wrote:
I don't see a "dma" node in the mpc8377mds.dts (2.6.25). I found one in
mpc8610_hpcd.dts and
modeled it after that.
Try head-of-tree.
[EMAIL PROTECTED] {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,elo-dma";
cell-index = <0>;
reg = <0x82a8 0x4>; /* DMA general status register */
ranges = <0x0 0x8100 0x200>;
Should also put the interrupts in the dma node itself, so that the
driver can register it once and use the shared status register (but
don't remove it from the individual channels).
-Scott
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
