On May 15, 2008, at 1:47 AM, David Gibson wrote:
On Wed, May 14, 2008 at 06:25:11PM -0500, Scott Wood wrote:
[EMAIL PROTECTED] wrote:
From: Jochen Friedrich <[EMAIL PROTECTED]>
Initialize I2C pins on boards with CPM1/CPM2 controllers.
Signed-off-by: Jochen Friedrich <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
arch/powerpc/boot/dts/mpc8272ads.dts | 10 ++++++++++
arch/powerpc/boot/dts/mpc866ads.dts | 10 ++++++++++
arch/powerpc/boot/dts/mpc885ads.dts | 10 ++++++++++
arch/powerpc/platforms/82xx/mpc8272_ads.c | 4 ++++
arch/powerpc/platforms/8xx/mpc86xads_setup.c | 4 ++++
arch/powerpc/platforms/8xx/mpc885ads_setup.c | 3 +++
6 files changed, 41 insertions(+)
diff -puN arch/powerpc/boot/dts/mpc8272ads.dts~powerpc-add-i2c-
pins-to-dts-and-board-setup arch/powerpc/boot/dts/mpc8272ads.dts
--- a/arch/powerpc/boot/dts/mpc8272ads.dts~powerpc-add-i2c-pins-to-
dts-and-board-setup
+++ a/arch/powerpc/boot/dts/mpc8272ads.dts
@@ -217,6 +217,16 @@
linux,network-index = <1>;
fsl,cpm-command = <0x16200300>;
};
+
+ [EMAIL PROTECTED] {
+ compatible = "fsl,mpc8272-i2c",
+ "fsl,cpm2-i2c",
+ "fsl,cpm-i2c";
+ reg = <11860 20 8afc 2>;
+ interrupts = <1 8>;
+ interrupt-parent = <&PIC>;
+ fsl,cpm-command = <29600000>;
+ };
As I pointed out earlier, this patch is sticking dts-v0 style
constants
into a dts-v1 file. It will not work.
Enough of this. *Sends patch converting all remaining dts files to
v1*. With any luck we can merge that soon, and forget about the
mistakes of v0 forever.
The problem isn't that, its this patch is out of date with mainline
and needs to be respun. All the .dts it touches have already been
converted to v1.
- k
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
