On Wed, May 14, 2008 at 06:25:11PM -0500, Scott Wood wrote:
> [EMAIL PROTECTED] wrote:
>> From: Jochen Friedrich <[EMAIL PROTECTED]>
>>
>> Initialize I2C pins on boards with CPM1/CPM2 controllers.
>>
>> Signed-off-by: Jochen Friedrich <[EMAIL PROTECTED]>
>> Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
>> ---
>>
>> arch/powerpc/boot/dts/mpc8272ads.dts | 10 ++++++++++
>> arch/powerpc/boot/dts/mpc866ads.dts | 10 ++++++++++
>> arch/powerpc/boot/dts/mpc885ads.dts | 10 ++++++++++
>> arch/powerpc/platforms/82xx/mpc8272_ads.c | 4 ++++
>> arch/powerpc/platforms/8xx/mpc86xads_setup.c | 4 ++++
>> arch/powerpc/platforms/8xx/mpc885ads_setup.c | 3 +++
>> 6 files changed, 41 insertions(+)
>>
>> diff -puN
>> arch/powerpc/boot/dts/mpc8272ads.dts~powerpc-add-i2c-pins-to-dts-and-board-setup
>> arch/powerpc/boot/dts/mpc8272ads.dts
>> ---
>> a/arch/powerpc/boot/dts/mpc8272ads.dts~powerpc-add-i2c-pins-to-dts-and-board-setup
>> +++ a/arch/powerpc/boot/dts/mpc8272ads.dts
>> @@ -217,6 +217,16 @@
>> linux,network-index = <1>;
>> fsl,cpm-command = <0x16200300>;
>> };
>> +
>> + [EMAIL PROTECTED] {
>> + compatible = "fsl,mpc8272-i2c",
>> + "fsl,cpm2-i2c",
>> + "fsl,cpm-i2c";
>> + reg = <11860 20 8afc 2>;
>> + interrupts = <1 8>;
>> + interrupt-parent = <&PIC>;
>> + fsl,cpm-command = <29600000>;
>> + };
>
> As I pointed out earlier, this patch is sticking dts-v0 style constants
> into a dts-v1 file. It will not work.
Enough of this. *Sends patch converting all remaining dts files to
v1*. With any luck we can merge that soon, and forget about the
mistakes of v0 forever.
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
