The CS4270 is using the second I2C bus, not the first, on the Freescale
MPC8610 HPCD, so its node in the device tree belongs under '[EMAIL PROTECTED]'
and not '[EMAIL PROTECTED]'.
Signed-off-by: Timur Tabi <[EMAIL PROTECTED]>
---
Kumar, this is a must-fix for 2.6.26.
The reason this didn't show up before is because the CS4270 driver
is an old-style driver, and so it doesn't actually use the device tree
to determine the I2C bus/address.
arch/powerpc/boot/dts/mpc8610_hpcd.dts | 14 +++++++-------
1 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index 08a780d..771f169 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -124,13 +124,6 @@
interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
-
- cs4270:[EMAIL PROTECTED] {
- compatible = "cirrus,cs4270";
- reg = <0x4f>;
- /* MCLK source is a stand-alone oscillator */
- clock-frequency = <12288000>;
- };
};
[EMAIL PROTECTED] {
@@ -142,6 +135,13 @@
interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
+
+ cs4270:[EMAIL PROTECTED] {
+ compatible = "cirrus,cs4270";
+ reg = <0x4f>;
+ /* MCLK source is a stand-alone oscillator */
+ clock-frequency = <12288000>;
+ };
};
serial0: [EMAIL PROTECTED] {
--
1.5.5
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev
