On Tue, 6 May 2008 08:37:16 -0500
Kumar Gala <[EMAIL PROTECTED]> wrote:
/;
> > +
> > +/ {
> > + model = "ASP8347E";
> > + compatible = "ASP8347E";
>
> "analogue-and-micro, ASP8347E";
Fair enough.
> > + memory {
> > + device_type = "memory";
> > + reg = <0x00000000 0x8000000>; // 128MB at 0
>
> is memory really fixed on this board or does the bootloader set this
> if, dynamic make it <0 0>
It's fixed as far as I know.
> > + [EMAIL PROTECTED] {
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + device_type = "soc";
> > + ranges = <0x0 0xff000000 0xff100000>;
>
> this is wrong, size should be like 0x100000
Agreed - typo !
> > + enet0: [EMAIL PROTECTED] {
> > + cell-index = <0>;
> > + device_type = "network";
> > + model = "TSEC";
> > + compatible = "gianfar";
> > + reg = <0x24000 0x1000>;
> > + local-mac-address = [ 00 08 e5 11 32 33 ];
> > + interrupts = <32 0x8 33 0x8 34 0x8>;
> > + interrupt-parent = <&ipic>;
> > + phy-handle = <&phy0>;
> > + linux,network-index = <0>;
>
> you shouldn't need this anymore. we should be using the aliases.
Aliases sound good to me. Don't know too much about how this should be defined
in a dts though, do you have an example I could use as a base for reference ?
Cheers.
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev
