Thank you, that seems to have worked. I can now ping and whatnot. One
question though. I used the linux v2.6.20 that came with the BSP for the
MPC8313ERDB and the ethernet worked. Was there a bug earlier that would have
allowed this default .dts to work with my phy address of '0'? I was rather
baffled with this problem as the two dts files seemed to be more or less
functionally identical (2.6.20 from BSP vs. 2.6.25)
Ron
> Date: Tue, 6 May 2008 17:04:21 -0500
> From: [EMAIL PROTECTED]
> To: [EMAIL PROTECTED]
> CC: linuxppc-dev@ozlabs.org
> Subject: Re: ifconfig MPC8313
>
> Ronald Madrid wrote:
> > I believe that it is zero. Is that valid?
>
> FWIH, it's not recommended, as it's interpreted as a broadcast address
> in some cases. However, if that's the way the board is, then go ahead
> and put a zero in the phy node's reg property.
>
> -Scott
_________________________________________________________________
Make Windows Vista more reliable and secure with Windows Vista Service Pack 1.
http://www.windowsvista.com/SP1?WT.mc_id=hotmailvistasp1banner
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
