On Fri, Apr 03, 2020 at 03:51:18PM +1100, Oliver O'Halloran wrote:
> On Mon, 2020-03-30 at 15:56 +1100, Sam Bobroff wrote:
> > EEH device state is currently removed (by eeh_remove_device()) during
> > the device release handler, which is invoked as the device's reference
> > count drops to zero. This may take some time, or forever, as other
> > threads may hold references.
> >
> > However, the PCI device state is released synchronously by
> > pci_stop_and_remove_bus_device(). This mismatch causes problems, for
> > example the device may be re-discovered as a new device before the
> > release handler has been called, leaving the PCI and EEH state
> > mismatched.
> >
> > So instead, call eeh_remove_device() from the bus device removal
> > handlers, which are called synchronously in the removal path.
> >
> > Signed-off-by: Sam Bobroff <sbobr...@linux.ibm.com>
> > ---
> > arch/powerpc/kernel/eeh.c | 26 ++++++++++++++++++++++++++
> > arch/powerpc/kernel/pci-hotplug.c | 2 --
> > 2 files changed, 26 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
> > index 17cb3e9b5697..c36c5a7db5ca 100644
> > --- a/arch/powerpc/kernel/eeh.c
> > +++ b/arch/powerpc/kernel/eeh.c
> > @@ -1106,6 +1106,32 @@ static int eeh_init(void)
> >
> > core_initcall_sync(eeh_init);
> >
> > +static int eeh_device_notifier(struct notifier_block *nb,
> > + unsigned long action, void *data)
> > +{
> > + struct device *dev = data;
> > +
> > + switch (action) {
> > + case BUS_NOTIFY_DEL_DEVICE:
> > + eeh_remove_device(to_pci_dev(dev));
> > + break;
> > + default:
> > + break;
> > + }
>
> A comment briefly explaining why we're not doing anything in the add
> case might be nice.
Good point, I'll add something for v2.
>
> Reviewed-by: Oliver O'Halloran <ooh...@gmail.com>
>
> > + return NOTIFY_DONE;
> > +}
> > +
> > +static struct notifier_block eeh_device_nb = {
> > + .notifier_call = eeh_device_notifier,
> > +};
> > +
> > +static __init int eeh_set_bus_notifier(void)
> > +{
> > + bus_register_notifier(&pci_bus_type, &eeh_device_nb);
> > + return 0;
> > +}
> > +arch_initcall(eeh_set_bus_notifier);
> > +
> > /**
> > * eeh_add_device_early - Enable EEH for the indicated device node
> > * @pdn: PCI device node for which to set up EEH
> > diff --git a/arch/powerpc/kernel/pci-hotplug.c
> > b/arch/powerpc/kernel/pci-hotplug.c
> > index d6a67f814983..28e9aa274f64 100644
> > --- a/arch/powerpc/kernel/pci-hotplug.c
> > +++ b/arch/powerpc/kernel/pci-hotplug.c
> > @@ -57,8 +57,6 @@ void pcibios_release_device(struct pci_dev *dev)
> > struct pci_controller *phb = pci_bus_to_host(dev->bus);
> > struct pci_dn *pdn = pci_get_pdn(dev);
> >
> > - eeh_remove_device(dev);
> > -
> > if (phb->controller_ops.release_device)
> > phb->controller_ops.release_device(dev);
> >
>
signature.asc
Description: PGP signature
