On Wed, May 15, 2019 at 9:36 AM Xiaowei Bao <xiaowei....@nxp.com> wrote:
> Signed-off-by: Xiaowei Bao <xiaowei....@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 52
> ++++++++++++++++++++++++
> 1 files changed, 52 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index b045812..50b579b 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -398,6 +398,58 @@
> status = "disabled";
> };
>
> + pcie@3400000 {
> + compatible = "fsl,ls1028a-pcie";
> + reg = <0x00 0x03400000 0x0 0x00100000 /* controller
> registers */
> + 0x80 0x00000000 0x0 0x00002000>; /*
> configuration space */
> + reg-names = "regs", "config";
> + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /*
> PME interrupt */
> + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; /*
> aer interrupt */
> + interrupt-names = "pme", "aer";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + device_type = "pci";
> + dma-coherent;
> + num-lanes = <4>;
> + bus-range = <0x0 0xff>;
> + ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000
> 0x0 0x00010000 /* downstream I/O */
> + 0x82000000 0x0 0x40000000 0x80 0x40000000
> 0x0 0x40000000>; /* non-prefetchable memory */
Are you sure there is no support for 64-bit BARs or prefetchable memory?
Is this a hardware bug, or something that can be fixed in firmware?
Arnd
