This code has been unused since it was merged and is in the way of
cleaning up the DMA code, thus remove it.
This effectively reverts commit 5d2aa710 ("powerpc/powernv: Add support
for Nvlink NPUs").
Signed-off-by: Christoph Hellwig <h...@lst.de>
---
arch/powerpc/include/asm/pci.h | 3 -
arch/powerpc/include/asm/powernv.h | 23 -
arch/powerpc/platforms/powernv/Makefile | 2 +-
arch/powerpc/platforms/powernv/npu-dma.c | 999 ----------------------
arch/powerpc/platforms/powernv/pci-ioda.c | 243 ------
arch/powerpc/platforms/powernv/pci.h | 11 -
6 files changed, 1 insertion(+), 1280 deletions(-)
delete mode 100644 arch/powerpc/platforms/powernv/npu-dma.c
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index 2af9ded80540..a01d2e3d6ff9 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -127,7 +127,4 @@ extern void pcibios_scan_phb(struct pci_controller *hose);
#endif /* __KERNEL__ */
-extern struct pci_dev *pnv_pci_get_gpu_dev(struct pci_dev *npdev);
-extern struct pci_dev *pnv_pci_get_npu_dev(struct pci_dev *gpdev, int index);
-
#endif /* __ASM_POWERPC_PCI_H */
diff --git a/arch/powerpc/include/asm/powernv.h
b/arch/powerpc/include/asm/powernv.h
index 2f3ff7a27881..4848a6b3c6b2 100644
--- a/arch/powerpc/include/asm/powernv.h
+++ b/arch/powerpc/include/asm/powernv.h
@@ -11,33 +11,10 @@
#define _ASM_POWERNV_H
#ifdef CONFIG_PPC_POWERNV
-#define NPU2_WRITE 1
extern void powernv_set_nmmu_ptcr(unsigned long ptcr);
-extern struct npu_context *pnv_npu2_init_context(struct pci_dev *gpdev,
- unsigned long flags,
- void (*cb)(struct npu_context *, void *),
- void *priv);
-extern void pnv_npu2_destroy_context(struct npu_context *context,
- struct pci_dev *gpdev);
-extern int pnv_npu2_handle_fault(struct npu_context *context, uintptr_t *ea,
- unsigned long *flags, unsigned long *status,
- int count);
-
void pnv_tm_init(void);
#else
static inline void powernv_set_nmmu_ptcr(unsigned long ptcr) { }
-static inline struct npu_context *pnv_npu2_init_context(struct pci_dev *gpdev,
- unsigned long flags,
- struct npu_context *(*cb)(struct npu_context *, void *),
- void *priv) { return ERR_PTR(-ENODEV); }
-static inline void pnv_npu2_destroy_context(struct npu_context *context,
- struct pci_dev *gpdev) { }
-
-static inline int pnv_npu2_handle_fault(struct npu_context *context,
- uintptr_t *ea, unsigned long *flags,
- unsigned long *status, int count) {
- return -ENODEV;
-}
static inline void pnv_tm_init(void) { }
static inline void pnv_power9_force_smt4(void) { }
diff --git a/arch/powerpc/platforms/powernv/Makefile
b/arch/powerpc/platforms/powernv/Makefile
index b540ce8eec55..2b13e9dd137c 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -6,7 +6,7 @@ obj-y += opal-msglog.o opal-hmi.o
opal-power.o opal-irqchip.o
obj-y += opal-kmsg.o opal-powercap.o opal-psr.o
opal-sensor-groups.o
obj-$(CONFIG_SMP) += smp.o subcore.o subcore-asm.o
-obj-$(CONFIG_PCI) += pci.o pci-ioda.o npu-dma.o pci-ioda-tce.o
+obj-$(CONFIG_PCI) += pci.o pci-ioda.o pci-ioda-tce.o
obj-$(CONFIG_CXL_BASE) += pci-cxl.o
obj-$(CONFIG_EEH) += eeh-powernv.o
obj-$(CONFIG_PPC_SCOM) += opal-xscom.o
diff --git a/arch/powerpc/platforms/powernv/npu-dma.c
b/arch/powerpc/platforms/powernv/npu-dma.c
deleted file mode 100644
index 8006c54a91e3..000000000000
--- a/arch/powerpc/platforms/powernv/npu-dma.c
+++ /dev/null
@@ -1,999 +0,0 @@
-/*
- * This file implements the DMA operations for NVLink devices. The NPU
- * devices all point to the same iommu table as the parent PCI device.
- *
- * Copyright Alistair Popple, IBM Corporation 2015.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of version 2 of the GNU General Public
- * License as published by the Free Software Foundation.
- */
-
-#include <linux/slab.h>
-#include <linux/mmu_notifier.h>
-#include <linux/mmu_context.h>
-#include <linux/of.h>
-#include <linux/export.h>
-#include <linux/pci.h>
-#include <linux/memblock.h>
-#include <linux/iommu.h>
-#include <linux/debugfs.h>
-
-#include <asm/debugfs.h>
-#include <asm/tlb.h>
-#include <asm/powernv.h>
-#include <asm/reg.h>
-#include <asm/opal.h>
-#include <asm/io.h>
-#include <asm/iommu.h>
-#include <asm/pnv-pci.h>
-#include <asm/msi_bitmap.h>
-#include <asm/opal.h>
-
-#include "powernv.h"
-#include "pci.h"
-
-#define npu_to_phb(x) container_of(x, struct pnv_phb, npu)
-
-/*
- * spinlock to protect initialisation of an npu_context for a particular
- * mm_struct.
- */
-static DEFINE_SPINLOCK(npu_context_lock);
-
-/*
- * When an address shootdown range exceeds this threshold we invalidate the
- * entire TLB on the GPU for the given PID rather than each specific address in
- * the range.
- */
-static uint64_t atsd_threshold = 2 * 1024 * 1024;
-static struct dentry *atsd_threshold_dentry;
-
-/*
- * Other types of TCE cache invalidation are not functional in the
- * hardware.
- */
-static struct pci_dev *get_pci_dev(struct device_node *dn)
-{
- struct pci_dn *pdn = PCI_DN(dn);
-
- return pci_get_domain_bus_and_slot(pci_domain_nr(pdn->phb->bus),
- pdn->busno, pdn->devfn);
-}
-
-/* Given a NPU device get the associated PCI device. */
-struct pci_dev *pnv_pci_get_gpu_dev(struct pci_dev *npdev)
-{
- struct device_node *dn;
- struct pci_dev *gpdev;
-
- if (WARN_ON(!npdev))
- return NULL;
-
- if (WARN_ON(!npdev->dev.of_node))
- return NULL;
-
- /* Get assoicated PCI device */
- dn = of_parse_phandle(npdev->dev.of_node, "ibm,gpu", 0);
- if (!dn)
- return NULL;
-
- gpdev = get_pci_dev(dn);
- of_node_put(dn);
-
- return gpdev;
-}
-EXPORT_SYMBOL(pnv_pci_get_gpu_dev);
-
-/* Given the real PCI device get a linked NPU device. */
-struct pci_dev *pnv_pci_get_npu_dev(struct pci_dev *gpdev, int index)
-{
- struct device_node *dn;
- struct pci_dev *npdev;
-
- if (WARN_ON(!gpdev))
- return NULL;
-
- /* Not all PCI devices have device-tree nodes */
- if (!gpdev->dev.of_node)
- return NULL;
-
- /* Get assoicated PCI device */
- dn = of_parse_phandle(gpdev->dev.of_node, "ibm,npu", index);
- if (!dn)
- return NULL;
-
- npdev = get_pci_dev(dn);
- of_node_put(dn);
-
- return npdev;
-}
-EXPORT_SYMBOL(pnv_pci_get_npu_dev);
-
-#define NPU_DMA_OP_UNSUPPORTED() \
- dev_err_once(dev, "%s operation unsupported for NVLink devices\n", \
- __func__)
-
-static void *dma_npu_alloc(struct device *dev, size_t size,
- dma_addr_t *dma_handle, gfp_t flag,
- unsigned long attrs)
-{
- NPU_DMA_OP_UNSUPPORTED();
- return NULL;
-}
-
-static void dma_npu_free(struct device *dev, size_t size,
- void *vaddr, dma_addr_t dma_handle,
- unsigned long attrs)
-{
- NPU_DMA_OP_UNSUPPORTED();
-}
-
-static dma_addr_t dma_npu_map_page(struct device *dev, struct page *page,
- unsigned long offset, size_t size,
- enum dma_data_direction direction,
- unsigned long attrs)
-{
- NPU_DMA_OP_UNSUPPORTED();
- return 0;
-}
-
-static int dma_npu_map_sg(struct device *dev, struct scatterlist *sglist,
- int nelems, enum dma_data_direction direction,
- unsigned long attrs)
-{
- NPU_DMA_OP_UNSUPPORTED();
- return 0;
-}
-
-static int dma_npu_dma_supported(struct device *dev, u64 mask)
-{
- NPU_DMA_OP_UNSUPPORTED();
- return 0;
-}
-
-static u64 dma_npu_get_required_mask(struct device *dev)
-{
- NPU_DMA_OP_UNSUPPORTED();
- return 0;
-}
-
-static const struct dma_map_ops dma_npu_ops = {
- .map_page = dma_npu_map_page,
- .map_sg = dma_npu_map_sg,
- .alloc = dma_npu_alloc,
- .free = dma_npu_free,
- .dma_supported = dma_npu_dma_supported,
- .get_required_mask = dma_npu_get_required_mask,
-};
-
-/*
- * Returns the PE assoicated with the PCI device of the given
- * NPU. Returns the linked pci device if pci_dev != NULL.
- */
-static struct pnv_ioda_pe *get_gpu_pci_dev_and_pe(struct pnv_ioda_pe *npe,
- struct pci_dev **gpdev)
-{
- struct pnv_phb *phb;
- struct pci_controller *hose;
- struct pci_dev *pdev;
- struct pnv_ioda_pe *pe;
- struct pci_dn *pdn;
-
- pdev = pnv_pci_get_gpu_dev(npe->pdev);
- if (!pdev)
- return NULL;
-
- pdn = pci_get_pdn(pdev);
- if (WARN_ON(!pdn || pdn->pe_number == IODA_INVALID_PE))
- return NULL;
-
- hose = pci_bus_to_host(pdev->bus);
- phb = hose->private_data;
- pe = &phb->ioda.pe_array[pdn->pe_number];
-
- if (gpdev)
- *gpdev = pdev;
-
- return pe;
-}
-
-long pnv_npu_set_window(struct pnv_ioda_pe *npe, int num,
- struct iommu_table *tbl)
-{
- struct pnv_phb *phb = npe->phb;
- int64_t rc;
- const unsigned long size = tbl->it_indirect_levels ?
- tbl->it_level_size : tbl->it_size;
- const __u64 start_addr = tbl->it_offset << tbl->it_page_shift;
- const __u64 win_size = tbl->it_size << tbl->it_page_shift;
-
- pe_info(npe, "Setting up window %llx..%llx pg=%lx\n",
- start_addr, start_addr + win_size - 1,
- IOMMU_PAGE_SIZE(tbl));
-
- rc = opal_pci_map_pe_dma_window(phb->opal_id,
- npe->pe_number,
- npe->pe_number,
- tbl->it_indirect_levels + 1,
- __pa(tbl->it_base),
- size << 3,
- IOMMU_PAGE_SIZE(tbl));
- if (rc) {
- pe_err(npe, "Failed to configure TCE table, err %lld\n", rc);
- return rc;
- }
- pnv_pci_ioda2_tce_invalidate_entire(phb, false);
-
- /* Add the table to the list so its TCE cache will get invalidated */
- pnv_pci_link_table_and_group(phb->hose->node, num,
- tbl, &npe->table_group);
-
- return 0;
-}
-
-long pnv_npu_unset_window(struct pnv_ioda_pe *npe, int num)
-{
- struct pnv_phb *phb = npe->phb;
- int64_t rc;
-
- pe_info(npe, "Removing DMA window\n");
-
- rc = opal_pci_map_pe_dma_window(phb->opal_id, npe->pe_number,
- npe->pe_number,
- 0/* levels */, 0/* table address */,
- 0/* table size */, 0/* page size */);
- if (rc) {
- pe_err(npe, "Unmapping failed, ret = %lld\n", rc);
- return rc;
- }
- pnv_pci_ioda2_tce_invalidate_entire(phb, false);
-
- pnv_pci_unlink_table_and_group(npe->table_group.tables[num],
- &npe->table_group);
-
- return 0;
-}
-
-/*
- * Enables 32 bit DMA on NPU.
- */
-static void pnv_npu_dma_set_32(struct pnv_ioda_pe *npe)
-{
- struct pci_dev *gpdev;
- struct pnv_ioda_pe *gpe;
- int64_t rc;
-
- /*
- * Find the assoicated PCI devices and get the dma window
- * information from there.
- */
- if (!npe->pdev || !(npe->flags & PNV_IODA_PE_DEV))
- return;
-
- gpe = get_gpu_pci_dev_and_pe(npe, &gpdev);
- if (!gpe)
- return;
-
- rc = pnv_npu_set_window(npe, 0, gpe->table_group.tables[0]);
-
- /*
- * We don't initialise npu_pe->tce32_table as we always use
- * dma_npu_ops which are nops.
- */
- set_dma_ops(&npe->pdev->dev, &dma_npu_ops);
-}
-
-/*
- * Enables bypass mode on the NPU. The NPU only supports one
- * window per link, so bypass needs to be explicitly enabled or
- * disabled. Unlike for a PHB3 bypass and non-bypass modes can't be
- * active at the same time.
- */
-static int pnv_npu_dma_set_bypass(struct pnv_ioda_pe *npe)
-{
- struct pnv_phb *phb = npe->phb;
- int64_t rc = 0;
- phys_addr_t top = memblock_end_of_DRAM();
-
- if (phb->type != PNV_PHB_NPU_NVLINK || !npe->pdev)
- return -EINVAL;
-
- rc = pnv_npu_unset_window(npe, 0);
- if (rc != OPAL_SUCCESS)
- return rc;
-
- /* Enable the bypass window */
-
- top = roundup_pow_of_two(top);
- dev_info(&npe->pdev->dev, "Enabling bypass for PE %x\n",
- npe->pe_number);
- rc = opal_pci_map_pe_dma_window_real(phb->opal_id,
- npe->pe_number, npe->pe_number,
- 0 /* bypass base */, top);
-
- if (rc == OPAL_SUCCESS)
- pnv_pci_ioda2_tce_invalidate_entire(phb, false);
-
- return rc;
-}
-
-void pnv_npu_try_dma_set_bypass(struct pci_dev *gpdev, bool bypass)
-{
- int i;
- struct pnv_phb *phb;
- struct pci_dn *pdn;
- struct pnv_ioda_pe *npe;
- struct pci_dev *npdev;
-
- for (i = 0; ; ++i) {
- npdev = pnv_pci_get_npu_dev(gpdev, i);
-
- if (!npdev)
- break;
-
- pdn = pci_get_pdn(npdev);
- if (WARN_ON(!pdn || pdn->pe_number == IODA_INVALID_PE))
- return;
-
- phb = pci_bus_to_host(npdev->bus)->private_data;
-
- /* We only do bypass if it's enabled on the linked device */
- npe = &phb->ioda.pe_array[pdn->pe_number];
-
- if (bypass) {
- dev_info(&npdev->dev,
- "Using 64-bit DMA iommu bypass\n");
- pnv_npu_dma_set_bypass(npe);
- } else {
- dev_info(&npdev->dev, "Using 32-bit DMA via iommu\n");
- pnv_npu_dma_set_32(npe);
- }
- }
-}
-
-/* Switch ownership from platform code to external user (e.g. VFIO) */
-void pnv_npu_take_ownership(struct pnv_ioda_pe *npe)
-{
- struct pnv_phb *phb = npe->phb;
- int64_t rc;
-
- /*
- * Note: NPU has just a single TVE in the hardware which means that
- * while used by the kernel, it can have either 32bit window or
- * DMA bypass but never both. So we deconfigure 32bit window only
- * if it was enabled at the moment of ownership change.
- */
- if (npe->table_group.tables[0]) {
- pnv_npu_unset_window(npe, 0);
- return;
- }
-
- /* Disable bypass */
- rc = opal_pci_map_pe_dma_window_real(phb->opal_id,
- npe->pe_number, npe->pe_number,
- 0 /* bypass base */, 0);
- if (rc) {
- pe_err(npe, "Failed to disable bypass, err %lld\n", rc);
- return;
- }
- pnv_pci_ioda2_tce_invalidate_entire(npe->phb, false);
-}
-
-struct pnv_ioda_pe *pnv_pci_npu_setup_iommu(struct pnv_ioda_pe *npe)
-{
- struct pnv_phb *phb = npe->phb;
- struct pci_bus *pbus = phb->hose->bus;
- struct pci_dev *npdev, *gpdev = NULL, *gptmp;
- struct pnv_ioda_pe *gpe = get_gpu_pci_dev_and_pe(npe, &gpdev);
-
- if (!gpe || !gpdev)
- return NULL;
-
- list_for_each_entry(npdev, &pbus->devices, bus_list) {
- gptmp = pnv_pci_get_gpu_dev(npdev);
-
- if (gptmp != gpdev)
- continue;
-
- pe_info(gpe, "Attached NPU %s\n", dev_name(&npdev->dev));
- iommu_group_add_device(gpe->table_group.group, &npdev->dev);
- }
-
- return gpe;
-}
-
-/* Maximum number of nvlinks per npu */
-#define NV_MAX_LINKS 6
-
-/* Maximum index of npu2 hosts in the system. Always < NV_MAX_NPUS */
-static int max_npu2_index;
-
-struct npu_context {
- struct mm_struct *mm;
- struct pci_dev *npdev[NV_MAX_NPUS][NV_MAX_LINKS];
- struct mmu_notifier mn;
- struct kref kref;
- bool nmmu_flush;
-
- /* Callback to stop translation requests on a given GPU */
- void (*release_cb)(struct npu_context *context, void *priv);
-
- /*
- * Private pointer passed to the above callback for usage by
- * device drivers.
- */
- void *priv;
-};
-
-struct mmio_atsd_reg {
- struct npu *npu;
- int reg;
-};
-
-/*
- * Find a free MMIO ATSD register and mark it in use. Return -ENOSPC
- * if none are available.
- */
-static int get_mmio_atsd_reg(struct npu *npu)
-{
- int i;
-
- for (i = 0; i < npu->mmio_atsd_count; i++) {
- if (!test_bit(i, &npu->mmio_atsd_usage))
- if (!test_and_set_bit_lock(i, &npu->mmio_atsd_usage))
- return i;
- }
-
- return -ENOSPC;
-}
-
-static void put_mmio_atsd_reg(struct npu *npu, int reg)
-{
- clear_bit_unlock(reg, &npu->mmio_atsd_usage);
-}
-
-/* MMIO ATSD register offsets */
-#define XTS_ATSD_AVA 1
-#define XTS_ATSD_STAT 2
-
-static void mmio_launch_invalidate(struct mmio_atsd_reg *mmio_atsd_reg,
- unsigned long launch, unsigned long va)
-{
- struct npu *npu = mmio_atsd_reg->npu;
- int reg = mmio_atsd_reg->reg;
-
- __raw_writeq_be(va, npu->mmio_atsd_regs[reg] + XTS_ATSD_AVA);
- eieio();
- __raw_writeq_be(launch, npu->mmio_atsd_regs[reg]);
-}
-
-static void mmio_invalidate_pid(struct mmio_atsd_reg
mmio_atsd_reg[NV_MAX_NPUS],
- unsigned long pid, bool flush)
-{
- int i;
- unsigned long launch;
-
- for (i = 0; i <= max_npu2_index; i++) {
- if (mmio_atsd_reg[i].reg < 0)
- continue;
-
- /* IS set to invalidate matching PID */
- launch = PPC_BIT(12);
-
- /* PRS set to process-scoped */
- launch |= PPC_BIT(13);
-
- /* AP */
- launch |= (u64)
- mmu_get_ap(mmu_virtual_psize) << PPC_BITLSHIFT(17);
-
- /* PID */
- launch |= pid << PPC_BITLSHIFT(38);
-
- /* No flush */
- launch |= !flush << PPC_BITLSHIFT(39);
-
- /* Invalidating the entire process doesn't use a va */
- mmio_launch_invalidate(&mmio_atsd_reg[i], launch, 0);
- }
-}
-
-static void mmio_invalidate_va(struct mmio_atsd_reg mmio_atsd_reg[NV_MAX_NPUS],
- unsigned long va, unsigned long pid, bool flush)
-{
- int i;
- unsigned long launch;
-
- for (i = 0; i <= max_npu2_index; i++) {
- if (mmio_atsd_reg[i].reg < 0)
- continue;
-
- /* IS set to invalidate target VA */
- launch = 0;
-
- /* PRS set to process scoped */
- launch |= PPC_BIT(13);
-
- /* AP */
- launch |= (u64)
- mmu_get_ap(mmu_virtual_psize) << PPC_BITLSHIFT(17);
-
- /* PID */
- launch |= pid << PPC_BITLSHIFT(38);
-
- /* No flush */
- launch |= !flush << PPC_BITLSHIFT(39);
-
- mmio_launch_invalidate(&mmio_atsd_reg[i], launch, va);
- }
-}
-
-#define mn_to_npu_context(x) container_of(x, struct npu_context, mn)
-
-static void mmio_invalidate_wait(
- struct mmio_atsd_reg mmio_atsd_reg[NV_MAX_NPUS])
-{
- struct npu *npu;
- int i, reg;
-
- /* Wait for all invalidations to complete */
- for (i = 0; i <= max_npu2_index; i++) {
- if (mmio_atsd_reg[i].reg < 0)
- continue;
-
- /* Wait for completion */
- npu = mmio_atsd_reg[i].npu;
- reg = mmio_atsd_reg[i].reg;
- while (__raw_readq(npu->mmio_atsd_regs[reg] + XTS_ATSD_STAT))
- cpu_relax();
- }
-}
-
-/*
- * Acquires all the address translation shootdown (ATSD) registers required to
- * launch an ATSD on all links this npu_context is active on.
- */
-static void acquire_atsd_reg(struct npu_context *npu_context,
- struct mmio_atsd_reg mmio_atsd_reg[NV_MAX_NPUS])
-{
- int i, j;
- struct npu *npu;
- struct pci_dev *npdev;
- struct pnv_phb *nphb;
-
- for (i = 0; i <= max_npu2_index; i++) {
- mmio_atsd_reg[i].reg = -1;
- for (j = 0; j < NV_MAX_LINKS; j++) {
- /*
- * There are no ordering requirements with respect to
- * the setup of struct npu_context, but to ensure
- * consistent behaviour we need to ensure npdev[][] is
- * only read once.
- */
- npdev = READ_ONCE(npu_context->npdev[i][j]);
- if (!npdev)
- continue;
-
- nphb = pci_bus_to_host(npdev->bus)->private_data;
- npu = &nphb->npu;
- mmio_atsd_reg[i].npu = npu;
- mmio_atsd_reg[i].reg = get_mmio_atsd_reg(npu);
- while (mmio_atsd_reg[i].reg < 0) {
- mmio_atsd_reg[i].reg = get_mmio_atsd_reg(npu);
- cpu_relax();
- }
- break;
- }
- }
-}
-
-/*
- * Release previously acquired ATSD registers. To avoid deadlocks the registers
- * must be released in the same order they were acquired above in
- * acquire_atsd_reg.
- */
-static void release_atsd_reg(struct mmio_atsd_reg mmio_atsd_reg[NV_MAX_NPUS])
-{
- int i;
-
- for (i = 0; i <= max_npu2_index; i++) {
- /*
- * We can't rely on npu_context->npdev[][] being the same here
- * as when acquire_atsd_reg() was called, hence we use the
- * values stored in mmio_atsd_reg during the acquire phase
- * rather than re-reading npdev[][].
- */
- if (mmio_atsd_reg[i].reg < 0)
- continue;
-
- put_mmio_atsd_reg(mmio_atsd_reg[i].npu, mmio_atsd_reg[i].reg);
- }
-}
-
-/*
- * Invalidate either a single address or an entire PID depending on
- * the value of va.
- */
-static void mmio_invalidate(struct npu_context *npu_context, int va,
- unsigned long address, bool flush)
-{
- struct mmio_atsd_reg mmio_atsd_reg[NV_MAX_NPUS];
- unsigned long pid = npu_context->mm->context.id;
-
- if (npu_context->nmmu_flush)
- /*
- * Unfortunately the nest mmu does not support flushing specific
- * addresses so we have to flush the whole mm once before
- * shooting down the GPU translation.
- */
- flush_all_mm(npu_context->mm);
-
- /*
- * Loop over all the NPUs this process is active on and launch
- * an invalidate.
- */
- acquire_atsd_reg(npu_context, mmio_atsd_reg);
- if (va)
- mmio_invalidate_va(mmio_atsd_reg, address, pid, flush);
- else
- mmio_invalidate_pid(mmio_atsd_reg, pid, flush);
-
- mmio_invalidate_wait(mmio_atsd_reg);
- if (flush) {
- /*
- * The GPU requires two flush ATSDs to ensure all entries have
- * been flushed. We use PID 0 as it will never be used for a
- * process on the GPU.
- */
- mmio_invalidate_pid(mmio_atsd_reg, 0, true);
- mmio_invalidate_wait(mmio_atsd_reg);
- mmio_invalidate_pid(mmio_atsd_reg, 0, true);
- mmio_invalidate_wait(mmio_atsd_reg);
- }
- release_atsd_reg(mmio_atsd_reg);
-}
-
-static void pnv_npu2_mn_release(struct mmu_notifier *mn,
- struct mm_struct *mm)
-{
- struct npu_context *npu_context = mn_to_npu_context(mn);
-
- /* Call into device driver to stop requests to the NMMU */
- if (npu_context->release_cb)
- npu_context->release_cb(npu_context, npu_context->priv);
-
- /*
- * There should be no more translation requests for this PID, but we
- * need to ensure any entries for it are removed from the TLB.
- */
- mmio_invalidate(npu_context, 0, 0, true);
-}
-
-static void pnv_npu2_mn_change_pte(struct mmu_notifier *mn,
- struct mm_struct *mm,
- unsigned long address,
- pte_t pte)
-{
- struct npu_context *npu_context = mn_to_npu_context(mn);
-
- mmio_invalidate(npu_context, 1, address, true);
-}
-
-static void pnv_npu2_mn_invalidate_range(struct mmu_notifier *mn,
- struct mm_struct *mm,
- unsigned long start, unsigned long end)
-{
- struct npu_context *npu_context = mn_to_npu_context(mn);
- unsigned long address;
-
- if (end - start > atsd_threshold) {
- /*
- * Just invalidate the entire PID if the address range is too
- * large.
- */
- mmio_invalidate(npu_context, 0, 0, true);
- } else {
- for (address = start; address < end; address += PAGE_SIZE)
- mmio_invalidate(npu_context, 1, address, false);
-
- /* Do the flush only on the final addess == end */
- mmio_invalidate(npu_context, 1, address, true);
- }
-}
-
-static const struct mmu_notifier_ops nv_nmmu_notifier_ops = {
- .release = pnv_npu2_mn_release,
- .change_pte = pnv_npu2_mn_change_pte,
- .invalidate_range = pnv_npu2_mn_invalidate_range,
-};
-
-/*
- * Call into OPAL to setup the nmmu context for the current task in
- * the NPU. This must be called to setup the context tables before the
- * GPU issues ATRs. pdev should be a pointed to PCIe GPU device.
- *
- * A release callback should be registered to allow a device driver to
- * be notified that it should not launch any new translation requests
- * as the final TLB invalidate is about to occur.
- *
- * Returns an error if there no contexts are currently available or a
- * npu_context which should be passed to pnv_npu2_handle_fault().
- *
- * mmap_sem must be held in write mode and must not be called from interrupt
- * context.
- */
-struct npu_context *pnv_npu2_init_context(struct pci_dev *gpdev,
- unsigned long flags,
- void (*cb)(struct npu_context *, void *),
- void *priv)
-{
- int rc;
- u32 nvlink_index;
- struct device_node *nvlink_dn;
- struct mm_struct *mm = current->mm;
- struct pnv_phb *nphb;
- struct npu *npu;
- struct npu_context *npu_context;
-
- /*
- * At present we don't support GPUs connected to multiple NPUs and I'm
- * not sure the hardware does either.
- */
- struct pci_dev *npdev = pnv_pci_get_npu_dev(gpdev, 0);
-
- if (!firmware_has_feature(FW_FEATURE_OPAL))
- return ERR_PTR(-ENODEV);
-
- if (!npdev)
- /* No nvlink associated with this GPU device */
- return ERR_PTR(-ENODEV);
-
- nvlink_dn = of_parse_phandle(npdev->dev.of_node, "ibm,nvlink", 0);
- if (WARN_ON(of_property_read_u32(nvlink_dn, "ibm,npu-link-index",
- &nvlink_index)))
- return ERR_PTR(-ENODEV);
-
- if (!mm || mm->context.id == 0) {
- /*
- * Kernel thread contexts are not supported and context id 0 is
- * reserved on the GPU.
- */
- return ERR_PTR(-EINVAL);
- }
-
- nphb = pci_bus_to_host(npdev->bus)->private_data;
- npu = &nphb->npu;
-
- /*
- * Setup the NPU context table for a particular GPU. These need to be
- * per-GPU as we need the tables to filter ATSDs when there are no
- * active contexts on a particular GPU. It is safe for these to be
- * called concurrently with destroy as the OPAL call takes appropriate
- * locks and refcounts on init/destroy.
- */
- rc = opal_npu_init_context(nphb->opal_id, mm->context.id, flags,
- PCI_DEVID(gpdev->bus->number, gpdev->devfn));
- if (rc < 0)
- return ERR_PTR(-ENOSPC);
-
- /*
- * We store the npu pci device so we can more easily get at the
- * associated npus.
- */
- spin_lock(&npu_context_lock);
- npu_context = mm->context.npu_context;
- if (npu_context) {
- if (npu_context->release_cb != cb ||
- npu_context->priv != priv) {
- spin_unlock(&npu_context_lock);
- opal_npu_destroy_context(nphb->opal_id, mm->context.id,
- PCI_DEVID(gpdev->bus->number,
- gpdev->devfn));
- return ERR_PTR(-EINVAL);
- }
-
- WARN_ON(!kref_get_unless_zero(&npu_context->kref));
- }
- spin_unlock(&npu_context_lock);
-
- if (!npu_context) {
- /*
- * We can set up these fields without holding the
- * npu_context_lock as the npu_context hasn't been returned to
- * the caller meaning it can't be destroyed. Parallel allocation
- * is protected against by mmap_sem.
- */
- rc = -ENOMEM;
- npu_context = kzalloc(sizeof(struct npu_context), GFP_KERNEL);
- if (npu_context) {
- kref_init(&npu_context->kref);
- npu_context->mm = mm;
- npu_context->mn.ops = &nv_nmmu_notifier_ops;
- rc = __mmu_notifier_register(&npu_context->mn, mm);
- }
-
- if (rc) {
- kfree(npu_context);
- opal_npu_destroy_context(nphb->opal_id, mm->context.id,
- PCI_DEVID(gpdev->bus->number,
- gpdev->devfn));
- return ERR_PTR(rc);
- }
-
- mm->context.npu_context = npu_context;
- }
-
- npu_context->release_cb = cb;
- npu_context->priv = priv;
-
- /*
- * npdev is a pci_dev pointer setup by the PCI code. We assign it to
- * npdev[][] to indicate to the mmu notifiers that an invalidation
- * should also be sent over this nvlink. The notifiers don't use any
- * other fields in npu_context, so we just need to ensure that when they
- * deference npu_context->npdev[][] it is either a valid pointer or
- * NULL.
- */
- WRITE_ONCE(npu_context->npdev[npu->index][nvlink_index], npdev);
-
- if (!nphb->npu.nmmu_flush) {
- /*
- * If we're not explicitly flushing ourselves we need to mark
- * the thread for global flushes
- */
- npu_context->nmmu_flush = false;
- mm_context_add_copro(mm);
- } else
- npu_context->nmmu_flush = true;
-
- return npu_context;
-}
-EXPORT_SYMBOL(pnv_npu2_init_context);
-
-static void pnv_npu2_release_context(struct kref *kref)
-{
- struct npu_context *npu_context =
- container_of(kref, struct npu_context, kref);
-
- if (!npu_context->nmmu_flush)
- mm_context_remove_copro(npu_context->mm);
-
- npu_context->mm->context.npu_context = NULL;
-}
-
-/*
- * Destroy a context on the given GPU. May free the npu_context if it is no
- * longer active on any GPUs. Must not be called from interrupt context.
- */
-void pnv_npu2_destroy_context(struct npu_context *npu_context,
- struct pci_dev *gpdev)
-{
- int removed;
- struct pnv_phb *nphb;
- struct npu *npu;
- struct pci_dev *npdev = pnv_pci_get_npu_dev(gpdev, 0);
- struct device_node *nvlink_dn;
- u32 nvlink_index;
-
- if (WARN_ON(!npdev))
- return;
-
- if (!firmware_has_feature(FW_FEATURE_OPAL))
- return;
-
- nphb = pci_bus_to_host(npdev->bus)->private_data;
- npu = &nphb->npu;
- nvlink_dn = of_parse_phandle(npdev->dev.of_node, "ibm,nvlink", 0);
- if (WARN_ON(of_property_read_u32(nvlink_dn, "ibm,npu-link-index",
- &nvlink_index)))
- return;
- WRITE_ONCE(npu_context->npdev[npu->index][nvlink_index], NULL);
- opal_npu_destroy_context(nphb->opal_id, npu_context->mm->context.id,
- PCI_DEVID(gpdev->bus->number, gpdev->devfn));
- spin_lock(&npu_context_lock);
- removed = kref_put(&npu_context->kref, pnv_npu2_release_context);
- spin_unlock(&npu_context_lock);
-
- /*
- * We need to do this outside of pnv_npu2_release_context so that it is
- * outside the spinlock as mmu_notifier_destroy uses SRCU.
- */
- if (removed) {
- mmu_notifier_unregister(&npu_context->mn,
- npu_context->mm);
-
- kfree(npu_context);
- }
-
-}
-EXPORT_SYMBOL(pnv_npu2_destroy_context);
-
-/*
- * Assumes mmap_sem is held for the contexts associated mm.
- */
-int pnv_npu2_handle_fault(struct npu_context *context, uintptr_t *ea,
- unsigned long *flags, unsigned long *status, int count)
-{
- u64 rc = 0, result = 0;
- int i, is_write;
- struct page *page[1];
-
- /* mmap_sem should be held so the struct_mm must be present */
- struct mm_struct *mm = context->mm;
-
- if (!firmware_has_feature(FW_FEATURE_OPAL))
- return -ENODEV;
-
- WARN_ON(!rwsem_is_locked(&mm->mmap_sem));
-
- for (i = 0; i < count; i++) {
- is_write = flags[i] & NPU2_WRITE;
- rc = get_user_pages_remote(NULL, mm, ea[i], 1,
- is_write ? FOLL_WRITE : 0,
- page, NULL, NULL);
-
- /*
- * To support virtualised environments we will have to do an
- * access to the page to ensure it gets faulted into the
- * hypervisor. For the moment virtualisation is not supported in
- * other areas so leave the access out.
- */
- if (rc != 1) {
- status[i] = rc;
- result = -EFAULT;
- continue;
- }
-
- status[i] = 0;
- put_page(page[0]);
- }
-
- return result;
-}
-EXPORT_SYMBOL(pnv_npu2_handle_fault);
-
-int pnv_npu2_init(struct pnv_phb *phb)
-{
- unsigned int i;
- u64 mmio_atsd;
- struct device_node *dn;
- struct pci_dev *gpdev;
- static int npu_index;
- uint64_t rc = 0;
-
- if (!atsd_threshold_dentry) {
- atsd_threshold_dentry = debugfs_create_x64("atsd_threshold",
- 0600, powerpc_debugfs_root, &atsd_threshold);
- }
-
- phb->npu.nmmu_flush =
- of_property_read_bool(phb->hose->dn, "ibm,nmmu-flush");
- for_each_child_of_node(phb->hose->dn, dn) {
- gpdev = pnv_pci_get_gpu_dev(get_pci_dev(dn));
- if (gpdev) {
- rc = opal_npu_map_lpar(phb->opal_id,
- PCI_DEVID(gpdev->bus->number, gpdev->devfn),
- 0, 0);
- if (rc)
- dev_err(&gpdev->dev,
- "Error %lld mapping device to LPAR\n",
- rc);
- }
- }
-
- for (i = 0; !of_property_read_u64_index(phb->hose->dn, "ibm,mmio-atsd",
- i, &mmio_atsd); i++)
- phb->npu.mmio_atsd_regs[i] = ioremap(mmio_atsd, 32);
-
- pr_info("NPU%lld: Found %d MMIO ATSD registers", phb->opal_id, i);
- phb->npu.mmio_atsd_count = i;
- phb->npu.mmio_atsd_usage = 0;
- npu_index++;
- if (WARN_ON(npu_index >= NV_MAX_NPUS))
- return -ENOSPC;
- max_npu2_index = npu_index;
- phb->npu.index = npu_index;
-
- return 0;
-}
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c
b/arch/powerpc/platforms/powernv/pci-ioda.c
index 913175ba1c10..b6db65917bb4 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1203,75 +1203,6 @@ static struct pnv_ioda_pe *pnv_ioda_setup_bus_PE(struct
pci_bus *bus, bool all)
return pe;
}
-static struct pnv_ioda_pe *pnv_ioda_setup_npu_PE(struct pci_dev *npu_pdev)
-{
- int pe_num, found_pe = false, rc;
- long rid;
- struct pnv_ioda_pe *pe;
- struct pci_dev *gpu_pdev;
- struct pci_dn *npu_pdn;
- struct pci_controller *hose = pci_bus_to_host(npu_pdev->bus);
- struct pnv_phb *phb = hose->private_data;
-
- /*
- * Due to a hardware errata PE#0 on the NPU is reserved for
- * error handling. This means we only have three PEs remaining
- * which need to be assigned to four links, implying some
- * links must share PEs.
- *
- * To achieve this we assign PEs such that NPUs linking the
- * same GPU get assigned the same PE.
- */
- gpu_pdev = pnv_pci_get_gpu_dev(npu_pdev);
- for (pe_num = 0; pe_num < phb->ioda.total_pe_num; pe_num++) {
- pe = &phb->ioda.pe_array[pe_num];
- if (!pe->pdev)
- continue;
-
- if (pnv_pci_get_gpu_dev(pe->pdev) == gpu_pdev) {
- /*
- * This device has the same peer GPU so should
- * be assigned the same PE as the existing
- * peer NPU.
- */
- dev_info(&npu_pdev->dev,
- "Associating to existing PE %x\n", pe_num);
- pci_dev_get(npu_pdev);
- npu_pdn = pci_get_pdn(npu_pdev);
- rid = npu_pdev->bus->number << 8 | npu_pdn->devfn;
- npu_pdn->pe_number = pe_num;
- phb->ioda.pe_rmap[rid] = pe->pe_number;
-
- /* Map the PE to this link */
- rc = opal_pci_set_pe(phb->opal_id, pe_num, rid,
- OpalPciBusAll,
- OPAL_COMPARE_RID_DEVICE_NUMBER,
- OPAL_COMPARE_RID_FUNCTION_NUMBER,
- OPAL_MAP_PE);
- WARN_ON(rc != OPAL_SUCCESS);
- found_pe = true;
- break;
- }
- }
-
- if (!found_pe)
- /*
- * Could not find an existing PE so allocate a new
- * one.
- */
- return pnv_ioda_setup_dev_PE(npu_pdev);
- else
- return pe;
-}
-
-static void pnv_ioda_setup_npu_PEs(struct pci_bus *bus)
-{
- struct pci_dev *pdev;
-
- list_for_each_entry(pdev, &bus->devices, bus_list)
- pnv_ioda_setup_npu_PE(pdev);
-}
-
static void pnv_pci_ioda_setup_PEs(void)
{
struct pci_controller *hose, *tmp;
@@ -1281,13 +1212,6 @@ static void pnv_pci_ioda_setup_PEs(void)
list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
phb = hose->private_data;
- if (phb->type == PNV_PHB_NPU_NVLINK) {
- /* PE#0 is needed for error reporting */
- pnv_ioda_reserve_pe(phb, 0);
- pnv_ioda_setup_npu_PEs(hose->bus);
- if (phb->model == PNV_PHB_MODEL_NPU2)
- pnv_npu2_init(phb);
- }
if (phb->type == PNV_PHB_NPU_OCAPI) {
bus = hose->bus;
list_for_each_entry(pdev, &bus->devices, bus_list)
@@ -1871,9 +1795,6 @@ static int pnv_pci_ioda_dma_set_mask(struct pci_dev
*pdev, u64 dma_mask)
}
*pdev->dev.dma_mask = dma_mask;
- /* Update peer npu devices */
- pnv_npu_try_dma_set_bypass(pdev, bypass);
-
return 0;
}
@@ -2119,14 +2040,6 @@ static void pnv_pci_ioda2_tce_invalidate(struct
iommu_table *tbl,
}
}
-void pnv_pci_ioda2_tce_invalidate_entire(struct pnv_phb *phb, bool rm)
-{
- if (phb->model == PNV_PHB_MODEL_NPU || phb->model == PNV_PHB_MODEL_PHB3)
- pnv_pci_phb3_tce_invalidate_entire(phb, rm);
- else
- opal_pci_tce_kill(phb->opal_id, OPAL_PCI_TCE_KILL, 0, 0, 0, 0);
-}
-
static int pnv_ioda2_tce_build(struct iommu_table *tbl, long index,
long npages, unsigned long uaddr,
enum dma_data_direction direction,
@@ -2615,137 +2528,6 @@ static struct iommu_table_group_ops pnv_pci_ioda2_ops =
{
.take_ownership = pnv_ioda2_take_ownership,
.release_ownership = pnv_ioda2_release_ownership,
};
-
-static int gpe_table_group_to_npe_cb(struct device *dev, void *opaque)
-{
- struct pci_controller *hose;
- struct pnv_phb *phb;
- struct pnv_ioda_pe **ptmppe = opaque;
- struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
- struct pci_dn *pdn = pci_get_pdn(pdev);
-
- if (!pdn || pdn->pe_number == IODA_INVALID_PE)
- return 0;
-
- hose = pci_bus_to_host(pdev->bus);
- phb = hose->private_data;
- if (phb->type != PNV_PHB_NPU_NVLINK)
- return 0;
-
- *ptmppe = &phb->ioda.pe_array[pdn->pe_number];
-
- return 1;
-}
-
-/*
- * This returns PE of associated NPU.
- * This assumes that NPU is in the same IOMMU group with GPU and there is
- * no other PEs.
- */
-static struct pnv_ioda_pe *gpe_table_group_to_npe(
- struct iommu_table_group *table_group)
-{
- struct pnv_ioda_pe *npe = NULL;
- int ret = iommu_group_for_each_dev(table_group->group, &npe,
- gpe_table_group_to_npe_cb);
-
- BUG_ON(!ret || !npe);
-
- return npe;
-}
-
-static long pnv_pci_ioda2_npu_set_window(struct iommu_table_group *table_group,
- int num, struct iommu_table *tbl)
-{
- struct pnv_ioda_pe *npe = gpe_table_group_to_npe(table_group);
- int num2 = (num == 0) ? 1 : 0;
- long ret = pnv_pci_ioda2_set_window(table_group, num, tbl);
-
- if (ret)
- return ret;
-
- if (table_group->tables[num2])
- pnv_npu_unset_window(npe, num2);
-
- ret = pnv_npu_set_window(npe, num, tbl);
- if (ret) {
- pnv_pci_ioda2_unset_window(table_group, num);
- if (table_group->tables[num2])
- pnv_npu_set_window(npe, num2,
- table_group->tables[num2]);
- }
-
- return ret;
-}
-
-static long pnv_pci_ioda2_npu_unset_window(
- struct iommu_table_group *table_group,
- int num)
-{
- struct pnv_ioda_pe *npe = gpe_table_group_to_npe(table_group);
- int num2 = (num == 0) ? 1 : 0;
- long ret = pnv_pci_ioda2_unset_window(table_group, num);
-
- if (ret)
- return ret;
-
- if (!npe->table_group.tables[num])
- return 0;
-
- ret = pnv_npu_unset_window(npe, num);
- if (ret)
- return ret;
-
- if (table_group->tables[num2])
- ret = pnv_npu_set_window(npe, num2, table_group->tables[num2]);
-
- return ret;
-}
-
-static void pnv_ioda2_npu_take_ownership(struct iommu_table_group *table_group)
-{
- /*
- * Detach NPU first as pnv_ioda2_take_ownership() will destroy
- * the iommu_table if 32bit DMA is enabled.
- */
- pnv_npu_take_ownership(gpe_table_group_to_npe(table_group));
- pnv_ioda2_take_ownership(table_group);
-}
-
-static struct iommu_table_group_ops pnv_pci_ioda2_npu_ops = {
- .get_table_size = pnv_pci_ioda2_get_table_size,
- .create_table = pnv_pci_ioda2_create_table_userspace,
- .set_window = pnv_pci_ioda2_npu_set_window,
- .unset_window = pnv_pci_ioda2_npu_unset_window,
- .take_ownership = pnv_ioda2_npu_take_ownership,
- .release_ownership = pnv_ioda2_release_ownership,
-};
-
-static void pnv_pci_ioda_setup_iommu_api(void)
-{
- struct pci_controller *hose, *tmp;
- struct pnv_phb *phb;
- struct pnv_ioda_pe *pe, *gpe;
-
- /*
- * Now we have all PHBs discovered, time to add NPU devices to
- * the corresponding IOMMU groups.
- */
- list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
- phb = hose->private_data;
-
- if (phb->type != PNV_PHB_NPU_NVLINK)
- continue;
-
- list_for_each_entry(pe, &phb->ioda.pe_list, list) {
- gpe = pnv_pci_npu_setup_iommu(pe);
- if (gpe)
- gpe->table_group.ops = &pnv_pci_ioda2_npu_ops;
- }
- }
-}
-#else /* !CONFIG_IOMMU_API */
-static void pnv_pci_ioda_setup_iommu_api(void) { };
#endif
static unsigned long pnv_ioda_parse_tce_sizes(struct pnv_phb *phb)
@@ -3242,7 +3024,6 @@ static void pnv_pci_enable_bridges(void)
static void pnv_pci_ioda_fixup(void)
{
pnv_pci_ioda_setup_PEs();
- pnv_pci_ioda_setup_iommu_api();
pnv_pci_ioda_create_dbgfs();
pnv_pci_enable_bridges();
@@ -3689,27 +3470,6 @@ static const struct pci_controller_ops
pnv_pci_ioda_controller_ops = {
.shutdown = pnv_pci_ioda_shutdown,
};
-static int pnv_npu_dma_set_mask(struct pci_dev *npdev, u64 dma_mask)
-{
- dev_err_once(&npdev->dev,
- "%s operation unsupported for NVLink devices\n",
- __func__);
- return -EPERM;
-}
-
-static const struct pci_controller_ops pnv_npu_ioda_controller_ops = {
- .dma_dev_setup = pnv_pci_dma_dev_setup,
-#ifdef CONFIG_PCI_MSI
- .setup_msi_irqs = pnv_setup_msi_irqs,
- .teardown_msi_irqs = pnv_teardown_msi_irqs,
-#endif
- .enable_device_hook = pnv_pci_enable_device_hook,
- .window_alignment = pnv_pci_window_alignment,
- .reset_secondary_bus = pnv_pci_reset_secondary_bus,
- .dma_set_mask = pnv_npu_dma_set_mask,
- .shutdown = pnv_pci_ioda_shutdown,
-};
-
static const struct pci_controller_ops pnv_npu_ocapi_ioda_controller_ops = {
.enable_device_hook = pnv_pci_enable_device_hook,
.window_alignment = pnv_pci_window_alignment,
@@ -3931,9 +3691,6 @@ static void __init pnv_pci_init_ioda_phb(struct
device_node *np,
ppc_md.pcibios_fixup = pnv_pci_ioda_fixup;
switch (phb->type) {
- case PNV_PHB_NPU_NVLINK:
- hose->controller_ops = pnv_npu_ioda_controller_ops;
- break;
case PNV_PHB_NPU_OCAPI:
hose->controller_ops = pnv_npu_ocapi_ioda_controller_ops;
break;
diff --git a/arch/powerpc/platforms/powernv/pci.h
b/arch/powerpc/platforms/powernv/pci.h
index 8b37b28e3831..54f2935b7ac5 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -231,17 +231,6 @@ extern void pe_level_printk(const struct pnv_ioda_pe *pe,
const char *level,
#define pe_info(pe, fmt, ...) \
pe_level_printk(pe, KERN_INFO, fmt, ##__VA_ARGS__)
-/* Nvlink functions */
-extern void pnv_npu_try_dma_set_bypass(struct pci_dev *gpdev, bool bypass);
-extern void pnv_pci_ioda2_tce_invalidate_entire(struct pnv_phb *phb, bool rm);
-extern struct pnv_ioda_pe *pnv_pci_npu_setup_iommu(struct pnv_ioda_pe *npe);
-extern long pnv_npu_set_window(struct pnv_ioda_pe *npe, int num,
- struct iommu_table *tbl);
-extern long pnv_npu_unset_window(struct pnv_ioda_pe *npe, int num);
-extern void pnv_npu_take_ownership(struct pnv_ioda_pe *npe);
-extern void pnv_npu_release_ownership(struct pnv_ioda_pe *npe);
-extern int pnv_npu2_init(struct pnv_phb *phb);
-
/* pci-ioda-tce.c */
#define POWERNV_IOMMU_DEFAULT_LEVELS 1
#define POWERNV_IOMMU_MAX_LEVELS 5
--
2.19.0
