The previous 3 commits added support code for the Nemo motherbard
as used in the Amigaone X1000, now wire them up so the board can
be detected and initalised at boot time.
Signed-off-by: Darren Stevens <dar...@stevens-zone.net>
---
Changes made:
v2: Changed init code to be empty when NEMO=n rather than using
#ifdefs
diff --git a/arch/powerpc/platforms/pasemi/pci.c
b/arch/powerpc/platforms/pasemi/pci.c
index c230acc..3ed0ff6 100644
--- a/arch/powerpc/platforms/pasemi/pci.c
+++ b/arch/powerpc/platforms/pasemi/pci.c
@@ -27,6 +27,7 @@
#include <linux/pci.h>
#include <asm/pci-bridge.h>
+#include <asm/isa-bridge.h>
#include <asm/machdep.h>
#include <asm/ppc-pci.h>
@@ -182,6 +183,8 @@ static int pa_pxp_read_config(struct pci_bus *bus, unsigned
int devfn,
addr = pa_pxp_cfg_addr(hose, bus->number, devfn, offset);
+ sb600_set_flag(bus->number);
+
/*
* Note: the caller has already checked that offset is
* suitably aligned and that len is 1, 2 or 4.
@@ -216,6 +219,8 @@ static int pa_pxp_write_config(struct pci_bus *bus,
unsigned int devfn,
addr = pa_pxp_cfg_addr(hose, bus->number, devfn, offset);
+ sb600_set_flag(bus->number);
+
/*
* Note: the caller has already checked that offset is
* suitably aligned and that len is 1, 2 or 4.
@@ -266,6 +271,11 @@ static int __init pas_add_bridge(struct device_node *dev)
/* Interpret the "ranges" property */
pci_process_bridge_OF_ranges(hose, dev, 1);
+ /* Scan for an isa bridge. This is needed to find the SB600
+ on the nemo and does nothing on machines without one
+ */
+ isa_bridge_find_early(hose);
+
return 0;
}
diff --git a/arch/powerpc/platforms/pasemi/setup.c
b/arch/powerpc/platforms/pasemi/setup.c
index 98bf2f7..49e67cf 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -314,6 +314,8 @@ static __init void pas_init_IRQ(void)
mpic_unmask_irq(irq_get_irq_data(nmi_virq));
}
+ nemo_init_IRQ(mpic);
+
of_node_put(mpic_node);
of_node_put(root);
}
@@ -475,6 +477,8 @@ static int __init pasemi_publish_devices(void)
/* Publish OF platform devices for SDC and other non-PCI devices */
of_platform_bus_probe(NULL, pasemi_bus_ids, NULL);
+ nemo_init_rtc();
+
return 0;
}
machine_device_initcall(pasemi, pasemi_publish_devices);
@@ -489,6 +493,17 @@ static int __init pas_probe(void)
!of_machine_is_compatible("pasemi,pwrficient"))
return 0;
+#ifdef CONFIG_PPC_PASEMI_NEMO
+ /*
+ * Check for the Nemo motherboard here, if we are running on one
+ * change the machine definition to fit
+ */
+ if (of_machine_is_compatible("pasemi,nemo")) {
+ pm_power_off = pas_shutdown;
+ ppc_md.name = "A-EON Amigaone X1000";
+ }
+#endif
+
iommu_init_early_pasemi();
return 1;