When idle_power4 hard disables interrupts then finds a soft pending
interrupt, it returns with interrupts hard disabled but without
PACA_IRQ_HARD_DIS set. Commit 9b81c0211c ("powerpc/64s: make
PACA_IRQ_HARD_DIS track MSR[EE] closely") added a warning for that
condition.
Fix this by adding the PACA_IRQ_HARD_DIS for that case.
Signed-off-by: Nicholas Piggin <npig...@gmail.com>
---
This was half tested by modifying power4_idle to work on later CPUs
because I have no G5.
arch/powerpc/kernel/idle_power4.S | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/kernel/idle_power4.S
b/arch/powerpc/kernel/idle_power4.S
index dd7471fe20bd..a09b3c7ca176 100644
--- a/arch/powerpc/kernel/idle_power4.S
+++ b/arch/powerpc/kernel/idle_power4.S
@@ -32,6 +32,8 @@ END_FTR_SECTION_IFCLR(CPU_FTR_CAN_NAP)
cmpwi 0,r4,0
beqlr
+ /* This sequence is similar to prep_irq_for_idle() */
+
/* Hard disable interrupts */
mfmsr r7
rldicl r0,r7,48,1
@@ -41,10 +43,15 @@ END_FTR_SECTION_IFCLR(CPU_FTR_CAN_NAP)
/* Check if something happened while soft-disabled */
lbz r0,PACAIRQHAPPENED(r13)
cmpwi cr0,r0,0
- bnelr
+ bne- 2f
- /* Soft-enable interrupts */
+ /*
+ * Soft-enable interrupts. This will make power4_fixup_nap return
+ * to our caller with interrupts enabled (soft and hard). The caller
+ * can cope with either interrupts disabled or enabled upon return.
+ */
#ifdef CONFIG_TRACE_IRQFLAGS
+ /* Tell the tracer interrupts are on, because idle responds to them. */
mflr r0
std r0,16(r1)
stdu r1,-128(r1)
@@ -73,3 +80,8 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
isync
b 1b
+2: /* Return if an interrupt had happened while soft disabled */
+ /* Set the HARD_DIS flag because interrupts are now hard disabled */
+ ori r0,r0,PACA_IRQ_HARD_DIS
+ stb r0,PACAIRQHAPPENED(r13)
+ blr
--
2.17.0
