On Tue, Jul 31, 2018 at 10:29:53AM -0400, Alexei Colin wrote: > Platforms with a PCI bus will be offered the RapidIO menu since they may > be want support for a RapidIO PCI device. Platforms without a PCI bus > that might include a RapidIO IP block will need to "select HAS_RAPIDIO" > in the platform-/machine-specific "config ARCH_*" Kconfig entry. > > Tested that kernel builds for ARM with the RapidIO subsystem and switch > drivers enabled. > > Cc: Andrew Morton <[email protected]> > Cc: Russell King <[email protected]> > Cc: John Paul Walters <[email protected]> > Cc: [email protected] > Cc: [email protected] > Cc: [email protected] > Cc: [email protected] > Cc: [email protected] > Signed-off-by: Alexei Colin <[email protected]> > --- > arch/arm/Kconfig | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > index afe350e5e3d9..602a61324890 100644 > --- a/arch/arm/Kconfig > +++ b/arch/arm/Kconfig > @@ -1278,6 +1278,8 @@ config PCI_HOST_ITE8152 > > source "drivers/pci/Kconfig" > > +source "drivers/rapidio/Kconfig" > + > source "drivers/pcmcia/Kconfig"
Why not place the new Kconfig file after pcmcia? That way, it is in a consistent position wrt architectures such as powerpc, and it is also in alphabetical order. -- RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line in suburbia: sync at 13.8Mbps down 630kbps up According to speedtest.net: 13Mbps down 490kbps up
