This series incorporates my earlier qe/muram fix before converting the existing mpc83xx DTS files to v1 format. I've also redone the mpc834x_mds with the IRQs as decimal as per Kumar's comments and re-included that too. I've kept each board as a separate commit in case one of them conflicts with what someone else is working on.
Boards covered are: 8349mds, 8349mitx, 8349mitx-gp, 836x_mds, 8323_mds, 8323_rdb, and the 8313_rdb. Plus a small tweak to the sbc8349 (it was already v1 -- but IRQs were in hex.) I've fed all the files to DTC before and after to ensure the output is the same after the conversion. I'm not aware of any explicit rules for what is hex vs decimal. I've tried to keep things that are usually discussed in decimal as decimal quantities (i.e. cache size, IRQ, counts, indicies) and all other data that you'd normally expect in hex (addresses, IRQ flags, masks) as hex -- including prefixing 0x on values from zero to 10 where it tends to make rows of numbers (e.g. ranges) align for better readability, even though it isn't required. Paul. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
