Kumar Gala wrote: > On Mon, 28 Jan 2008, Paul Gortmaker wrote: > > >> This series incorporates my earlier qe/muram fix before converting >> the existing mpc83xx DTS files to v1 format. I've also redone the >> mpc834x_mds with the IRQs as decimal as per Kumar's comments and >> re-included that too. I've kept each board as a separate commit >> in case one of them conflicts with what someone else is working on. >> >> Boards covered are: 8349mds, 8349mitx, 8349mitx-gp, 836x_mds, >> 8323_mds, 8323_rdb, and the 8313_rdb. Plus a small tweak to the >> sbc8349 (it was already v1 -- but IRQs were in hex.) >> >> I've fed all the files to DTC before and after to ensure the >> output is the same after the conversion. >> >> I'm not aware of any explicit rules for what is hex vs decimal. >> I've tried to keep things that are usually discussed in decimal >> as decimal quantities (i.e. cache size, IRQ, counts, indicies) >> and all other data that you'd normally expect in hex (addresses, >> IRQ flags, masks) as hex -- including prefixing 0x on values from >> zero to 10 where it tends to make rows of numbers (e.g. ranges) >> align for better readability, even though it isn't required. >> >> > > Can you regen these patches (2..9) againast my latest tree. Also, a > single patch that cleans up all the boards is sufficient. >
The patches should be current to your tree still as of today; they are based on: f09f415ea23272ae68f9322f90246680d46f4868 not-for-merge branch 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc My patch #1 with all four qe/muram boards was posted earlier here: http://ozlabs.org/pipermail/linuxppc-dev/2008-January/050767.html Let me know what you need them based against and I can respin as required. P. > - k > _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
