device_type property is bogus, thus use proper compatible. Also change compatible property to "fsl,ucc-mdio".
Per http://ozlabs.org/pipermail/linuxppc-dev/2007-December/048388.html Signed-off-by: Anton Vorontsov <[EMAIL PROTECTED]> --- arch/powerpc/boot/dts/mpc832x_mds.dts | 3 +-- arch/powerpc/boot/dts/mpc832x_rdb.dts | 3 +-- arch/powerpc/boot/dts/mpc836x_mds.dts | 3 +-- arch/powerpc/boot/dts/mpc836x_rdk.dts | 3 +-- arch/powerpc/boot/dts/mpc8568mds.dts | 2 +- drivers/net/ucc_geth_mii.c | 3 +++ 6 files changed, 8 insertions(+), 9 deletions(-) diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts index e300df4..1bb75ef 100644 --- a/arch/powerpc/boot/dts/mpc832x_mds.dts +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts @@ -304,8 +304,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <2320 18>; - device_type = "mdio"; - compatible = "ucc_geth_phy"; + compatible = "fsl,ucc-mdio"; phy3: [EMAIL PROTECTED] { interrupt-parent = < &ipic >; diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts index 4d5cfd3..f6a8633 100644 --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -237,8 +237,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <3120 18>; - device_type = "mdio"; - compatible = "ucc_geth_phy"; + compatible = "fsl,ucc-mdio"; phy00:[EMAIL PROTECTED] { interrupt-parent = <&pic>; diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts index 9a2581b..fa98bdf 100644 --- a/arch/powerpc/boot/dts/mpc836x_mds.dts +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts @@ -288,8 +288,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <2120 18>; - device_type = "mdio"; - compatible = "ucc_geth_phy"; + compatible = "fsl,ucc-mdio"; phy0: [EMAIL PROTECTED] { interrupt-parent = < &ipic >; diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts index e244619..e299442 100644 --- a/arch/powerpc/boot/dts/mpc836x_rdk.dts +++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts @@ -251,8 +251,7 @@ [EMAIL PROTECTED] { #address-cells = <1>; #size-cells = <0>; - device_type = "mdio"; - compatible = "fsl,ucc-mdio", "ucc_geth_phy"; + compatible = "fsl,ucc-mdio"; reg = <0x2120 0x18>; phy1: [EMAIL PROTECTED] { diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index 04f5c6f..692d5bd 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -357,7 +357,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <2120 18>; - compatible = "ucc_geth_phy"; + compatible = "fsl,ucc-mdio"; /* These are the same PHYs as on * gianfar's MDIO bus */ diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c index df884f0..e3ba14a 100644 --- a/drivers/net/ucc_geth_mii.c +++ b/drivers/net/ucc_geth_mii.c @@ -256,6 +256,9 @@ static struct of_device_id uec_mdio_match[] = { .type = "mdio", .compatible = "ucc_geth_phy", }, + { + .compatible = "fsl,ucc-mdio", + }, {}, }; -- 1.5.2.2 _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
