On Thu, 2008-01-24 at 00:38 -0600, Kumar Gala wrote: > The common arch/powerpc code calls in to functions in setup-bus.c > so some builds of ppc32 would fail. > > Note, ppc32 usage of setup-irq.c is limited to arch/ppc and should be > removed when arch/ppc goes away. > > Signed-off-by: Kumar Gala <[EMAIL PROTECTED]> > Signed-off-by: Greg Kroah-Hartman <[EMAIL PROTECTED]>
Ack. Funny I didn't catch it on my 4xx testing, I must have always had HOTPLUG enabled. > --- > > Here's the proper diff, will send this via paulus. > > drivers/pci/Makefile | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile > index 5550556..f697f3d 100644 > --- a/drivers/pci/Makefile > +++ b/drivers/pci/Makefile > @@ -32,7 +32,7 @@ obj-$(CONFIG_ARM) += setup-bus.o setup-irq.o > obj-$(CONFIG_PARISC) += setup-bus.o > obj-$(CONFIG_SUPERH) += setup-bus.o setup-irq.o > obj-$(CONFIG_PPC32) += setup-irq.o > -obj-$(CONFIG_PPC64) += setup-bus.o > +obj-$(CONFIG_PPC) += setup-bus.o > obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o > obj-$(CONFIG_X86_VISWS) += setup-irq.o > _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
