The common arch/powerpc code calls in to functions in setup-bus.c so some builds of ppc32 would fail.
Note, ppc32 usage of setup-irq.c is limited to arch/ppc and should be removed when arch/ppc goes away. Signed-off-by: Kumar Gala <[EMAIL PROTECTED]> Signed-off-by: Greg Kroah-Hartman <[EMAIL PROTECTED]> --- Here's the proper diff, will send this via paulus. drivers/pci/Makefile | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 5550556..f697f3d 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -32,7 +32,7 @@ obj-$(CONFIG_ARM) += setup-bus.o setup-irq.o obj-$(CONFIG_PARISC) += setup-bus.o obj-$(CONFIG_SUPERH) += setup-bus.o setup-irq.o obj-$(CONFIG_PPC32) += setup-irq.o -obj-$(CONFIG_PPC64) += setup-bus.o +obj-$(CONFIG_PPC) += setup-bus.o obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o obj-$(CONFIG_X86_VISWS) += setup-irq.o -- 1.5.3.7 _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
