On Monday 14 January 2008, Sean MacLennan wrote: > Stefan Roese wrote: > > And the EBC0_BxCR & EBC0BxAP registers for the CS where the NAND is > > connected? How are they configured? > > EBC0_B1CR d001c000 > EBC0_B1AP 18003c0 > > Which matches the defines in include/configs/warp.h: > > #define CFG_EBC_PB1AP 0x018003c0 > #define CFG_EBC_PB1CR (CFG_NAND_ADDR | 0x1c000) > > It also matches the defines in sequoia.h except that we are on CS1 and > the sequoia is on CS3.
Right. One thing I noticed though is, that you map the NAND to 0xd0000000, which is reserved for PCI in the 440EP address space. I suggest you map it to 0x90000000 as done on Bamboo. Please give it a try and let me know if this changes the 32bit access behavior. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED] ===================================================================== _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
