On Tue, 2016-06-28 at 13:34 +1000, Benjamin Herrenschmidt wrote:
> On Tue, 2016-06-28 at 13:11 +1000, Samuel Mendoza-Jonas wrote:
> > Update the hvc driver to use the OPAL irqchip if made available by
> > the
> > running firmware. If it is not present, the driver falls back to
> > the
> > existing OPAL event number.
>
> One thing that worries me a bit with the original transition to using
> an interrupt from the old OPAL callback is that when passed an
> interrupt,
> the HVC thread assumes interrupts work reliably and thus stops
> polling.
Note to Greg: This patch is fine, this is a reflexion about a change
that was already done.
> However, not all platforms have a functional serial interrupt. For
> example rhesus doesn't. In fact we don't always know when we build
> the device-tree whether the serial interrupt will work or not.
>
> Now we might be saved by the OPAL heartbeat ... we do call
> opal_poll_events regularily there. But I'd like you to verify it
> by disabling the LPC interrupt for example on an openpower machine
> and see how the console beahves.
>
> Cheers,
> Ben.
>
>
> > Signed-off-by: Samuel Mendoza-Jonas <s...@mendozajonas.com>
> > Cc: <sta...@vger.kernel.org> # 4.1.x-
> > ---
> > drivers/tty/hvc/hvc_opal.c | 12 +++++++++++-
> > 1 file changed, 11 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/tty/hvc/hvc_opal.c
> > b/drivers/tty/hvc/hvc_opal.c
> > index b7cd0ae..8c53f5b 100644
> > --- a/drivers/tty/hvc/hvc_opal.c
> > +++ b/drivers/tty/hvc/hvc_opal.c
> > @@ -170,6 +170,8 @@ static int hvc_opal_probe(struct
> > platform_device *dev)
> > hv_protocol_t proto;
> > unsigned int termno, irq, boot = 0;
> > const __be32 *reg;
> > + u32 prop;
> > + int rc;
> >
> > if (of_device_is_compatible(dev->dev.of_node, "ibm,opal-
> > console-raw")) {
> > proto = HV_PROTOCOL_RAW;
> > @@ -214,7 +216,15 @@ static int hvc_opal_probe(struct
> > platform_device *dev)
> > dev->dev.of_node->full_name,
> > boot ? " (boot console)" : "");
> >
> > - irq = opal_event_request(ilog2(OPAL_EVENT_CONSOLE_INPUT));
> > + rc = of_property_read_u32(dev->dev.of_node, "interrupts",
> > &prop);
> > + if (rc) {
> > + pr_info("hvc%d: No interrupts property, using OPAL
> > event\n",
> > + termno);
> > + irq =
> > opal_event_request(ilog2(OPAL_EVENT_CONSOLE_INPUT));
> > + } else {
> > + irq = irq_of_parse_and_map(dev->dev.of_node, 0);
> > + }
> > +
> > if (!irq) {
> > pr_err("hvc_opal: Unable to map interrupt for
> > device %s\n",
> > dev->dev.of_node->full_name);
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
