In message: Re: [PATCH 2/3] sbc8548: Add device tree source for Wind River
SBC8548 board
on 21/12/2007 Kumar Gala wrote:
>
> On Dec 21, 2007, at 12:43 AM, Paul Gortmaker wrote:
>
>> This adds the device tree source for the Wind River SBC8548 board.
[...]
> mind looking at converting this to a dts-v1 format?
>
> - k
I figured there might be value in having it as a separate commit, seeing
as there aren't that many other dts-v1 as a reference (yet). Not sure
if I've got all the v1 type changes in that you had in mind, but I fed
it through the latest dtc from git and fed it to the board and it still
seems happy with it.
I'll probably be away from e-mail after this afternoon for the holiday
period -- so thanks (everyone) for the feedback and whatever I don't
get to today, or any additional recommended changes I'll pick up in Jan.
P.
---
>From: Paul Gortmaker <[EMAIL PROTECTED]>
>Date: Fri, 21 Dec 2007 12:11:17 -0500
>Subject: [PATCH] sbc8548: Convert device tree to be dts-v1 compatible
This converts the sbc8548 dts to be dts-v1 compatible. Tested with the
latest git pull of dtc (Dec 21/07).
Signed-off-by: Paul Gortmaker <[EMAIL PROTECTED]>
---
arch/powerpc/boot/dts/sbc8548.dts | 122 +++++++++++++++++++------------------
1 files changed, 62 insertions(+), 60 deletions(-)
diff --git a/arch/powerpc/boot/dts/sbc8548.dts
b/arch/powerpc/boot/dts/sbc8548.dts
index e63ed20..14be38a 100644
--- a/arch/powerpc/boot/dts/sbc8548.dts
+++ b/arch/powerpc/boot/dts/sbc8548.dts
@@ -12,6 +12,8 @@
*/
+/dts-v1/;
+
/ {
model = "SBC8548";
compatible = "SBC8548";
@@ -35,10 +37,10 @@
PowerPC,[EMAIL PROTECTED] {
device_type = "cpu";
reg = <0>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
+ d-cache-line-size = <0x20>; // 32 bytes
+ i-cache-line-size = <0x20>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>; // From uboot
bus-frequency = <0>;
clock-frequency = <0>;
@@ -47,31 +49,31 @@
memory {
device_type = "memory";
- reg = <00000000 10000000>;
+ reg = <0x00000000 0x10000000>;
};
[EMAIL PROTECTED] {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
- ranges = <00000000 e0000000 00100000>;
- reg = <e0000000 00001000>; // CCSRBAR
+ ranges = <0x00000000 0xe0000000 0x00100000>;
+ reg = <0xe0000000 0x00001000>; // CCSRBAR
bus-frequency = <0>;
[EMAIL PROTECTED] {
compatible = "fsl,8548-memory-controller";
- reg = <2000 1000>;
+ reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
- interrupts = <12 2>;
+ interrupts = <0x12 0x2>;
};
[EMAIL PROTECTED] {
compatible = "fsl,8548-l2-cache-controller";
- reg = <20000 1000>;
- cache-line-size = <20>; // 32 bytes
- cache-size = <80000>; // L2, 512K
+ reg = <0x20000 0x1000>;
+ cache-line-size = <0x20>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
interrupt-parent = <&mpic>;
- interrupts = <10 2>;
+ interrupts = <0x10 0x2>;
};
[EMAIL PROTECTED] {
@@ -79,8 +81,8 @@
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
- reg = <3000 100>;
- interrupts = <2b 2>;
+ reg = <0x3000 0x100>;
+ interrupts = <0x2b 0x2>;
interrupt-parent = <&mpic>;
dfsrr;
};
@@ -90,8 +92,8 @@
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
- reg = <3100 100>;
- interrupts = <2b 2>;
+ reg = <0x3100 0x100>;
+ interrupts = <0x2b 0x2>;
interrupt-parent = <&mpic>;
dfsrr;
};
@@ -100,18 +102,18 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
- reg = <24520 20>;
+ reg = <0x24520 0x20>;
phy0: [EMAIL PROTECTED] {
interrupt-parent = <&mpic>;
- interrupts = <6 1>;
- reg = <19>;
+ interrupts = <0x6 0x1>;
+ reg = <0x19>;
device_type = "ethernet-phy";
};
phy1: [EMAIL PROTECTED] {
interrupt-parent = <&mpic>;
- interrupts = <7 1>;
- reg = <1a>;
+ interrupts = <0x7 0x1>;
+ reg = <0x1a>;
device_type = "ethernet-phy";
};
};
@@ -121,9 +123,9 @@
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
- reg = <24000 1000>;
+ reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1d 2 1e 2 22 2>;
+ interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
};
@@ -133,9 +135,9 @@
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
- reg = <25000 1000>;
+ reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <23 2 24 2 28 2>;
+ interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
};
@@ -144,9 +146,9 @@
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
- reg = <4500 100>; // reg base, size
+ reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <2a 2>;
+ interrupts = <0x2a 0x2>;
interrupt-parent = <&mpic>;
};
@@ -154,15 +156,15 @@
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
- reg = <4600 100>; // reg base, size
+ reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <2a 2>;
+ interrupts = <0x2a 0x2>;
interrupt-parent = <&mpic>;
};
[EMAIL PROTECTED] { //global utilities reg
compatible = "fsl,mpc8548-guts";
- reg = <e0000 1000>;
+ reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
@@ -171,7 +173,7 @@
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- reg = <40000 40000>;
+ reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
@@ -180,63 +182,63 @@
pci0: [EMAIL PROTECTED] {
cell-index = <0>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x01 (PCI-X slot) */
- 00800 0 0 1 &mpic 0 1
- 00800 0 0 2 &mpic 1 1
- 00800 0 0 3 &mpic 2 1
- 00800 0 0 4 &mpic 3 1>;
+ 0x0800 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x0800 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x0800 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x0800 0x0 0x0 0x4 &mpic 0x3 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <18 2>;
+ interrupts = <0x18 0x2>;
bus-range = <0 0>;
- ranges = <02000000 0 80000000 80000000 0 10000000
- 01000000 0 00000000 e2000000 0 00800000>;
- clock-frequency = <3f940aa>;
+ ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+ 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>;
+ clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e0008000 1000>;
+ reg = <0xe0008000 0x1000>;
compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
device_type = "pci";
};
pci2: [EMAIL PROTECTED] {
cell-index = <2>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 (PEX) */
- 00000 0 0 1 &mpic 0 1
- 00000 0 0 2 &mpic 1 1
- 00000 0 0 3 &mpic 2 1
- 00000 0 0 4 &mpic 3 1>;
+ 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <1a 2>;
- bus-range = <0 ff>;
- ranges = <02000000 0 a0000000 a0000000 0 20000000
- 01000000 0 00000000 e3000000 0 08000000>;
- clock-frequency = <1fca055>;
+ interrupts = <0x1a 0x2>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+ 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x08000000>;
+ clock-frequency = <33333333>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e000a000 1000>;
+ reg = <0xe000a000 0x1000>;
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
[EMAIL PROTECTED] {
- reg = <0 0 0 0 0>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- ranges = <02000000 0 a0000000
- 02000000 0 a0000000
- 0 20000000
+ ranges = <0x02000000 0x0 0xa0000000
+ 0x02000000 0x0 0xa0000000
+ 0x0 0x20000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 08000000>;
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x08000000>;
};
};
};
--
1.5.0.rc1.gf4b6c
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
