On Tue, Dec 11, 2007 at 02:10:52AM +0300, Anton Vorontsov wrote:
> On Tue, Dec 11, 2007 at 10:04:53AM +1100, David Gibson wrote:
> > On Mon, Dec 10, 2007 at 11:47:05PM +0300, Anton Vorontsov wrote:
> > > Hi all,
> > >
> > > Here are patches to support NAND on UPM. That driver is generic for
> > > all processors with FSL UPMs. And because of that, few more patches are
> > > needed -- GPIO API and generic FSL UPM functions.
> > >
> > > This is early RFC, all patches are in single thread, so everyone could
> > > make up overall picture of what is going on. I'll split the thread by
> > > topics after that RFC.
> > >
> > > Ok, the patches and what they are for:
> > >
> > > 1,2,3,4. GPIO API:
> > > ------------------
> > > Usually NAND chips exports RNB (Ready-Not-Busy) pin, so drivers
> > > could read it and get a hint when chip is ready.
> > >
> > > Often, WP (write protect) pin is also connected to GPIO. So, GPIO API
> > > is mandatory for generic drivers.
> > >
> > > OF device tree GPIOs bindings are similar to IRQs:
> > >
> > > node {
> > > gpios = <bank pin bank pin bank pin>;
> > > gpio-parent = <&par_io_controller>;
> > > };
> > >
> > > "bank pin" scheme is controller specific, so controllers that want
> > > to implement flat mappings or any other could do so.
> >
> > It might be safest to do as is done for interrupts, and not define the
> > internal format at all.
>
> This is how it is done already. Take a look into second and third patches:
>
> +static int par_io_xlate(struct device_node *np, int index)
> +{
> + return __of_parse_gpio_bank_pin(np, index, 32, num_par_io_ports);
> +}
> +
> +static struct of_gpio_chip of_gpio_chip = {
> + .xlate = par_io_xlate,
> +};
>
> __of_parse_gpio_bank_pin() is helper function, I just factored
> it out, because both QE and CPM2 using same format.
>
> But generally, controllers are encouraged to do their own xlates.
>
> Or am I missing the point?
Right, but you are assuming a fixed size (2 cells?) for the bank/pin
information, arent' you - I didn't see any #gpio-cells or similar
looking property. I'm wondering if some gpio controllers might want
less (only one bank) or more (bank, pin, polarity/flags perhaps).
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
