> -----Original Message-----
> From: Kumar Gala [mailto:[EMAIL PROTECTED]
> Sent: Wednesday, November 21, 2007 1:13 PM
> To: linuxppc-dev@ozlabs.org
> Cc: Segher Boessenkool; Li Yang
> Subject: [PATCH 1/3] [POWERPC] Add docs for Freescale 83xx
> SATA device tree nodes
>
> ---
> Documentation/powerpc/booting-without-of.txt | 23
> +++++++++++++++++++++++
> 1 files changed, 23 insertions(+), 0 deletions(-)
>
> diff --git a/Documentation/powerpc/booting-without-of.txt
> b/Documentation/powerpc/booting-without-of.txt
> index e9a3cb1..eb14dd5 100644
> --- a/Documentation/powerpc/booting-without-of.txt
> +++ b/Documentation/powerpc/booting-without-of.txt
> @@ -2514,6 +2514,29 @@ platforms are moved over to use the
> flattened-device-tree model.
> Requred properties:
> - current-speed : Baud rate of uartlite
>
> + * Freescale 8xxx/3.0 Gb/s SATA nodes
> +
> + SATA nodes are defined to describe on-chip Serial ATA
> controllers.
> + Each SATA port should have its own node.
> +
> + Required properties:
> + - compatible : compatible list, contains 2
> entries, first is
> + "fsl,sata-CHIP", where CHIP is the processor
Should be "fsl,CHIP-sata"
> + (mpc8315, mpc8379, etc.) and the second is
> + "fsl,sata-pq2pro"
Why not use "pq2pro-sata" to be consistent with the CHIP version?
> + - interrupts : <interrupt mapping for SATA IRQ>
> + - interrupt-parent : optional, if needed for interrupt mapping
> + - reg : <registers mapping>
> +
> + Example:
> +
> + [EMAIL PROTECTED] {
> + compatible = "fsl,mpc8315-sata", "fsl,sata-pq2pro;
Quotation mark missing.
- Leo
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
