This adds the device-tree bits & call to ppc4xx_pci_find_bridges()
to make PCI work on the Bamboo board
Signed-off-by: Benjamin Herrenschmidt <[EMAIL PROTECTED]>
---
arch/powerpc/boot/dts/bamboo.dts | 40 ++++++++++++++++++++++++++++++++++++++-
1 file changed, 39 insertions(+), 1 deletion(-)
Index: linux-work/arch/powerpc/boot/dts/bamboo.dts
===================================================================
--- linux-work.orig/arch/powerpc/boot/dts/bamboo.dts 2007-11-30
13:40:21.000000000 +1100
+++ linux-work/arch/powerpc/boot/dts/bamboo.dts 2007-11-30 13:40:45.000000000
+1100
@@ -239,10 +239,48 @@
zmii-channel = <1>;
};
};
+
+ PCI0: [EMAIL PROTECTED] {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
+ primary;
+ reg = <0 eec00000 8 /* Config space access */
+ 0 eed80000 4 /* IACK */
+ 0 eed80000 4 /* Special cycle */
+ 0 ef480000 40>; /* Internal registers */
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed. Chip supports a second
+ * IO range but we don't use it for now
+ */
+ ranges = <02000000 0 a0000000 0 a0000000 0 20000000
+ 01000000 0 00000000 0 e8000000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* Walnut has all 4 IRQ pins tied together per slot */
+ interrupt-map-mask = <f800 0 0 0>;
+ interrupt-map = <
+ /* IDSEL 1 */
+ 0800 0 0 0 &UIC0 1c 8
+
+ /* IDSEL 2 */
+ 1000 0 0 0 &UIC0 1b 8
+
+ /* IDSEL 3 */
+ 1800 0 0 0 &UIC0 1a 8
+
+ /* IDSEL 4 */
+ 2000 0 0 0 &UIC0 19 8
+ >;
+ };
};
chosen {
linux,stdout-path = "/plb/opb/[EMAIL PROTECTED]";
- bootargs = "console=ttyS0,115200";
};
};
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
