[POWERPC] pasemi: Register i2c_board_info
Setup i2c_board_info based on device tree contents. This has to be
a device_initcall since we need PCI to be probed by the time we
run it, but before the actual driver is initialized.
Signed-off-by: Olof Johansson <[EMAIL PROTECTED]>
Index: 2.6.24/arch/powerpc/platforms/pasemi/Makefile
===================================================================
--- 2.6.24.orig/arch/powerpc/platforms/pasemi/Makefile
+++ 2.6.24/arch/powerpc/platforms/pasemi/Makefile
@@ -1,4 +1,4 @@
-obj-y += setup.o pci.o time.o idle.o powersave.o iommu.o
+obj-y += setup.o pci.o time.o idle.o powersave.o iommu.o misc.o
obj-$(CONFIG_PPC_PASEMI_MDIO) += gpio_mdio.o
obj-$(CONFIG_ELECTRA_IDE) += electra_ide.o
obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += cpufreq.o
Index: 2.6.24/arch/powerpc/platforms/pasemi/misc.c
===================================================================
--- /dev/null
+++ 2.6.24/arch/powerpc/platforms/pasemi/misc.c
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2007 PA Semi, Inc
+ *
+ * Parts based on arch/powerpc/sysdev/fsl_soc.c:
+ *
+ * 2006 (c) MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/of.h>
+#include <linux/i2c.h>
+#include <asm/i2c_of.h>
+
+#ifdef CONFIG_I2C_BOARDINFO
+static int __init pasemi_register_i2c_devices(void)
+{
+ struct pci_dev *pdev;
+ struct device_node *adap_node;
+ struct device_node *node;
+
+ pdev = NULL;
+ while ((pdev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa003, pdev))) {
+ adap_node = pci_device_to_OF_node(pdev);
+
+ if (!adap_node)
+ continue;
+
+ node = NULL;
+ while ((node = of_get_next_child(adap_node, node))) {
+ struct i2c_board_info info = {};
+ const u32 *addr;
+ int len;
+
+ addr = of_get_property(node, "reg", &len);
+ if (!addr || len < sizeof(int) ||
+ *addr > (1 << 10) - 1) {
+ printk(KERN_WARNING
+ "pasemi_register_i2c_devices: "
+ "invalid i2c device entry\n");
+ continue;
+ }
+
+ info.irq = irq_of_parse_and_map(node, 0);
+ if (info.irq == NO_IRQ)
+ info.irq = -1;
+
+ if (of_fill_i2c_info(node, &info) < 0)
+ continue;
+
+ info.addr = *addr;
+
+ i2c_register_board_info(PCI_FUNC(pdev->devfn), &info,
+ 1);
+ }
+ }
+ return 0;
+}
+device_initcall(pasemi_register_i2c_devices);
+#endif
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
