fs_enet and cpm_uart need symbols from commproc.c (for CPM1) or
cpm2_common.c. Add EXPORT_SYMBOL_GPL for cpmp, cpm_setbrg and cpm2_immr,
so the drivers can be compiled as modules.
Building modules, stage 2.
MODPOST 5 modules
ERROR: "cpm2_immr" [drivers/net/fs_enet/fs_enet.ko] undefined!
ERROR: "cpmp" [drivers/net/fs_enet/fs_enet.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2
Signed-off-by: Jochen Friedrich <[EMAIL PROTECTED]>
Acked-by: Scott Wood <[EMAIL PROTECTED]>
---
arch/powerpc/sysdev/commproc.c | 3 +++
arch/powerpc/sysdev/cpm2_common.c | 3 +++
2 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/sysdev/commproc.c b/arch/powerpc/sysdev/commproc.c
index f6a6378..ddbe138 100644
--- a/arch/powerpc/sysdev/commproc.c
+++ b/arch/powerpc/sysdev/commproc.c
@@ -51,6 +51,8 @@ static void m8xx_cpm_dpinit(void);
static uint host_buffer; /* One page of host buffer */
static uint host_end; /* end + 1 */
cpm8xx_t __iomem *cpmp; /* Pointer to comm processor space */
+EXPORT_SYMBOL_GPL(cpmp);
+
immap_t __iomem *mpc8xx_immr;
static cpic8xx_t __iomem *cpic_reg;
@@ -302,6 +304,7 @@ cpm_setbrg(uint brg, uint rate)
out_be32(bp, (((BRG_UART_CLK_DIV16 / rate) - 1) << 1) |
CPM_BRG_EN | CPM_BRG_DIV16);
}
+EXPORT_SYMBOL_GPL(cpm_setbrg);
#ifndef CONFIG_PPC_CPM_NEW_BINDING
/*
diff --git a/arch/powerpc/sysdev/cpm2_common.c
b/arch/powerpc/sysdev/cpm2_common.c
index 859362f..b878a67 100644
--- a/arch/powerpc/sysdev/cpm2_common.c
+++ b/arch/powerpc/sysdev/cpm2_common.c
@@ -51,11 +51,13 @@ static void cpm2_dpinit(void);
#endif
cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor space */
+EXPORT_SYMBOL_GPL(cpmp);
/* We allocate this here because it is used almost exclusively for
* the communication processor devices.
*/
cpm2_map_t __iomem *cpm2_immr;
+EXPORT_SYMBOL_GPL(cpm2_immr);
#define CPM_MAP_SIZE (0x40000) /* 256k - the PQ3 reserve this amount
of space for CPM as it is larger
@@ -117,6 +119,7 @@ cpm_setbrg(uint brg, uint rate)
cpm2_unmap(bp);
}
+EXPORT_SYMBOL_GPL(cpm_setbrg);
/* This function is used to set high speed synchronous baud rate
* clocks.
--
1.5.3.4
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
