This patch moves the CPM command handling into commproc.c
for CPM1 and cpm2_common.c. This is yet another preparation
to get rid of drivers accessing the CPM via the global cpmp.
Signed-off-by: Jochen Friedrich <[EMAIL PROTECTED]>
---
arch/powerpc/sysdev/commproc.c | 20 ++++++++++++++++++++
arch/powerpc/sysdev/cpm2_common.c | 17 +++++++++++++++++
drivers/net/fs_enet/mac-fcc.c | 10 +---------
drivers/net/fs_enet/mac-scc.c | 11 +----------
drivers/serial/cpm_uart/cpm_uart_cpm1.c | 6 +-----
drivers/serial/cpm_uart/cpm_uart_cpm2.c | 8 +-------
include/asm-powerpc/cpm.h | 1 +
7 files changed, 42 insertions(+), 31 deletions(-)
diff --git a/arch/powerpc/sysdev/commproc.c b/arch/powerpc/sysdev/commproc.c
index f6a6378..2bddbde 100644
--- a/arch/powerpc/sysdev/commproc.c
+++ b/arch/powerpc/sysdev/commproc.c
@@ -240,6 +240,26 @@ void __init cpm_reset(void)
#endif
}
+#define MAX_CR_CMD_LOOPS 10000
+
+int cpm_command(u32 command, u8 opcode)
+{
+ int i;
+
+ if (command & 0xffffff0f)
+ return -EINVAL;
+
+ out_be16(&cpmp->cp_cpcr, command | CPM_CR_FLG | (opcode << 8));
+ for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
+ if ((in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
+ return 0;
+
+ printk(KERN_ERR "%s(): Not able to issue CPM command\n",
+ __FUNCTION__);
+ return -EIO;
+}
+EXPORT_SYMBOL(cpm_command);
+
/* We used to do this earlier, but have to postpone as long as possible
* to ensure the kernel VM is now running.
*/
diff --git a/arch/powerpc/sysdev/cpm2_common.c
b/arch/powerpc/sysdev/cpm2_common.c
index 859362f..9e36b6b 100644
--- a/arch/powerpc/sysdev/cpm2_common.c
+++ b/arch/powerpc/sysdev/cpm2_common.c
@@ -83,6 +83,23 @@ cpm2_reset(void)
cpmp = &cpm2_immr->im_cpm;
}
+#define MAX_CR_CMD_LOOPS 10000
+
+int cpm_command(u32 command, u8 opcode)
+{
+ int i;
+
+ out_be32(&cpmp->cp_cpcr, command | opcode | CPM_CR_FLG);
+ for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
+ if ((in_be32(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
+ return 0;
+
+ printk(KERN_ERR "%s(): Not able to issue CPM command\n",
+ __FUNCTION__);
+ return -EIO;
+}
+EXPORT_SYMBOL(cpm_command);
+
/* Set a baud rate generator. This needs lots of work. There are
* eight BRGs, which can be connected to the CPM channels or output
* as clocks. The BRGs are in two different block of internal
diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/fs_enet/mac-fcc.c
index da4efbc..e363211 100644
--- a/drivers/net/fs_enet/mac-fcc.c
+++ b/drivers/net/fs_enet/mac-fcc.c
@@ -81,16 +81,8 @@
static inline int fcc_cr_cmd(struct fs_enet_private *fep, u32 op)
{
const struct fs_platform_info *fpi = fep->fpi;
- int i;
-
- W32(cpmp, cp_cpcr, fpi->cp_command | op | CPM_CR_FLG);
- for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
- if ((R32(cpmp, cp_cpcr) & CPM_CR_FLG) == 0)
- return 0;
- printk(KERN_ERR "%s(): Not able to issue CPM command\n",
- __FUNCTION__);
- return 1;
+ return cpm_command(fpi->cp_command, op);
}
static int do_pd_setup(struct fs_enet_private *fep)
diff --git a/drivers/net/fs_enet/mac-scc.c b/drivers/net/fs_enet/mac-scc.c
index 03134f4..5ff856d 100644
--- a/drivers/net/fs_enet/mac-scc.c
+++ b/drivers/net/fs_enet/mac-scc.c
@@ -89,21 +89,12 @@
* Delay to wait for SCC reset command to complete (in us)
*/
#define SCC_RESET_DELAY 50
-#define MAX_CR_CMD_LOOPS 10000
static inline int scc_cr_cmd(struct fs_enet_private *fep, u32 op)
{
const struct fs_platform_info *fpi = fep->fpi;
- int i;
-
- W16(cpmp, cp_cpcr, fpi->cp_command | CPM_CR_FLG | (op << 8));
- for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
- if ((R16(cpmp, cp_cpcr) & CPM_CR_FLG) == 0)
- return 0;
- printk(KERN_ERR "%s(): Not able to issue CPM command\n",
- __FUNCTION__);
- return 1;
+ return cpm_command(fpi->cp_command, op);
}
static int do_pd_setup(struct fs_enet_private *fep)
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index 52fb044..6ea0366 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -52,11 +52,7 @@
#ifdef CONFIG_PPC_CPM_NEW_BINDING
void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
{
- u16 __iomem *cpcr = &cpmp->cp_cpcr;
-
- out_be16(cpcr, port->command | (cmd << 8) | CPM_CR_FLG);
- while (in_be16(cpcr) & CPM_CR_FLG)
- ;
+ cpm_command(port->command, cmd);
}
#else
void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index 882dbc1..def0158 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -52,13 +52,7 @@
#ifdef CONFIG_PPC_CPM_NEW_BINDING
void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
{
- cpm_cpm2_t __iomem *cp = cpm2_map(im_cpm);
-
- out_be32(&cp->cp_cpcr, port->command | cmd | CPM_CR_FLG);
- while (in_be32(&cp->cp_cpcr) & CPM_CR_FLG)
- ;
-
- cpm2_unmap(cp);
+ cpm_command(port->command, cmd);
}
#else
void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
diff --git a/include/asm-powerpc/cpm.h b/include/asm-powerpc/cpm.h
index 48df9f3..fae83b1 100644
--- a/include/asm-powerpc/cpm.h
+++ b/include/asm-powerpc/cpm.h
@@ -10,5 +10,6 @@ int cpm_muram_free(unsigned long offset);
unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
void __iomem *cpm_muram_addr(unsigned long offset);
dma_addr_t cpm_muram_dma(void __iomem *addr);
+int cpm_command(u32 command, u8 opcode);
#endif
--
1.5.3.4
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
