On Thu, 2007-10-18 at 08:04 +1000, Benjamin Herrenschmidt wrote:
> net: Add __napi_synchronize() to sync with napi poll
>
> The EMAC driver which needs to handle multiple devices with one
> NAPI instance implements its own per-channel disable bit. However,
> when setting such a bit, it needs to synchronize with the poller
> (that is make sure that any pending poller instance has completed,
> or is started late enough to see that disable bit).
>
> This implements a low level __napi_synchronize() function to acheive
> that. The underscores are to emphasis the low level aspect of it and
> to discourage driver writers who don't know what they are doing to
> use it (to please DaveM :-)
>
> Signed-off-by: Benjamin Herrenschmidt <[EMAIL PROTECTED]>
Ok, trying again, leaving the actual patch below. In the above patch
description, you still call it __napi_synchronize. In the patch below,
it's napi_syncronize.
I was just trying to point out to whomever commits this patch that the
actual description should probably be fixed.
> ---
>
> Back to msleep() since it fits my need well and that's what
> you used as well. Note that the smp_mb() will turn into barrier()
> on non-SMP.
>
> I'll send a separate patch to fix EMAC to use the non __ version.
>
> Index: linux-work/include/linux/netdevice.h
> ===================================================================
> --- linux-work.orig/include/linux/netdevice.h 2007-10-17 13:31:32.000000000
> +1000
> +++ linux-work/include/linux/netdevice.h 2007-10-18 08:01:05.000000000
> +1000
> @@ -394,6 +394,23 @@ static inline void napi_disable(struct n
> }
>
> /**
> + * napi_synchronize - synchronize with a concurrent poll
> + * @n: napi context
> + *
> + * Synchronizes with a concurrent poll. Not to be used in normal
> + * drivers, mostly useful if you end up with multiple interfaces
> + * on one NAPI instance. This must be called from task context.
> + */
> +static inline void napi_synchronize(struct napi_struct *n)
> +{
> + smp_mb();
> +#ifdef CONFIG_SMP
> + while (test_bit(NAPI_STATE_SCHED, &n->state))
> + msleep(1);
> +#endif /* CONFIG_SMP */
> +}
> +
> +/**
> * napi_enable - enable NAPI scheduling
> * @n: napi context
> *
>
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
