Joel Schoopp wrote: >Paulus wrote: >> [c00000003f923c40] c00000000003bff4 .xics_migrate_irqs_away+0x3c/0x20c >> [c00000003f923d00] c000000000040d54 .pseries_cpu_disable+0x98/0xb4 >> [c00000003f923d80] c000000000028e4c .__cpu_disable+0x44/0x58 >> [c00000003f923df0] c00000000007e204 .take_cpu_down+0x34/0x60 >> [c00000003f923e70] c00000000008ba3c .do_stop+0x144/0x1e4 >> [c00000003f923f00] c00000000006fd74 .kthread+0x78/0xc4 >> [c00000003f923f90] c0000000000272a8 .kernel_thread+0x4c >> >> I don't have time tonight or tomorrow to track this down further. I'm >> taking the kids to the coast tommorow. :) >> > This looks like the problem Olof and Milton sent out patches to fix. The > Power3 shouldn't be doing cpu hotplug.
Paul's comment prompted both of us. Actually, cpu_hotplug (offline calling rtas stop-self, not dlpar remove) should be supported on POWER3 and RS64, its just that the pseries disable code calls over into xics directly. offline support would help preserve system uptime under a "failing processor" scenerio. To fix that, we need a mpic version of migrate_irqs_away. powermac is using the "bury head in sand" approach for that right now (ie if you bind an interrupt and offline all the cpus in the mask, the interrupt won't be delivered until you reset the affinity). Its also a broken in that bringing a cpu back online adds the cpu to all interrupts not just those who have the cpu mask bit set. milton _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
